osd-contiki/cpu/pico-rv32/irq.h
Ralf Schlatterbeck cb1e085ebf First implementation of cc2520 radio
Can write and read memory of radio chip. No communication with
merkur-board so far.
2016-05-08 21:20:58 +02:00

68 lines
2.3 KiB
C

/*
* Copyright (c) 2016, Dr. Ralf Schlatterbeck Open Source Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/**
* \brief This module contains PicoRV32-specific code to implement
* Interrupt handling for Timer and other interrupts
*
* \author Ralf Schlatterbeck <rsc@runtux.com>.
*
*/
/** \addtogroup picorv32
* @{
*/
/**
* \file
* Interrupt handling for Timer and other interrupts
*
*/
#ifndef IRQ_H_
#define IRQ_H_
#include "icosoc.h"
/* Want to set this higher if we have more than two external interrupts
* See used interrupts in icosoc.cfg. Don't set lower than 2 (2 is the
* bus-error interrupt)
*/
#define MAXIRQ 4
#define TIMER_IRQ 0
void irq_init (void);
void register_irq (int irq, void (*callback)(void));
void enable_irq (int irq);
void disable_irq (int irq);
#endif /* IRQ_H_ */
/** @} */