ifeq ($(TARGET), osd-merkur) PLATFORM_FILES= avr-size er-example-server.osd-merkur.hex \ er-example-server.osd-merkur.eep endif all: er-example-server $(PLATFORM_FILES) # use this target explicitly if requried: er-plugtest-server CONTIKI=../../.. # Contiki IPv6 configuration CONTIKI_WITH_IPV6 = 1 CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\" # pcintkey PROJECT_SOURCEFILES += pcintkey.c PROJECT_SOURCEFILES += statusled.c # variable for Makefile.include ifneq ($(TARGET), minimal-net) CFLAGS += -DUIP_CONF_IPV6_RPL=1 else # minimal-net does not support RPL under Linux and is mostly used to test CoAP only ${info INFO: compiling without RPL} CFLAGS += -DUIP_CONF_IPV6_RPL=0 CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\" ${info INFO: compiling with large buffers} CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048 CFLAGS += -DREST_MAX_CHUNK_SIZE=1024 CFLAGS += -DCOAP_MAX_HEADER_SIZE=640 endif # linker optimizations SMALL=1 # REST Engine shall use Erbium CoAP implementation APPS += er-coap APPS += rest-engine APPS += json json-resource include $(CONTIKI)/Makefile.include avr-size: er-example-server.osd-merkur avr-size -C --mcu=MCU=atmega128rfa1 er-example-server.osd-merkur er-example-server.osd-merkur.hex: er-example-server.osd-merkur avr-objcopy -j .text -j .data -O ihex er-example-server.osd-merkur \ er-example-server.osd-merkur.hex er-example-server.osd-merkur.eep: er-example-server.osd-merkur avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \ --change-section-lma .eeprom=0 -O ihex \ er-example-server.osd-merkur er-example-server.osd-merkur.eep flash: er-example-server.osd-merkur.hex er-example-server.osd-merkur.eep avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U \ flash:w:er-example-server.osd-merkur.hex:a -U \ eeprom:w:er-example-server.osd-merkur.eep:a .PHONY: flash avr-size $(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c (cd $(CONTIKI)/tools && $(MAKE) tunslip6) connect-router: $(CONTIKI)/tools/tunslip6 sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64 connect-router-cooja: $(CONTIKI)/tools/tunslip6 sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64 connect-minimal: sudo ip address add fdfd::1/64 dev tap0