# $Id: Makefile.z1,v 1.5 2011/02/26 enricmcalvo Exp $

CFLAGS+=-Os -g
CLEAN += symbols.c symbols.h

ARCH=msp430.c leds.c watchdog.c xmem.c \
     spix.c cc2420.c cc2420-aes.c cc2420-arch.c cc2420-arch-sfd.c\
     node-id.c sensors.c button-sensor.c cfs-coffee.c \
     radio-sensor.c uart0x.c uart0-putchar.c uip-ipchksum.c \
     checkpoint-arch.c slip.c slip_uart0.c z1-phidgets.c

CONTIKI_TARGET_DIRS = . dev apps net
ifndef CONTIKI_TARGET_MAIN
CONTIKI_TARGET_MAIN = contiki-z1-main.c
endif

ifdef UIP_CONF_IPV6
CFLAGS += -DWITH_UIP6=1
endif

ifdef nodemac
CFLAGS += -DMACID=$(nodemac)
endif

CONTIKI_TARGET_SOURCEFILES += $(ARCH) $(UIPDRIVERS) $(CONTIKI_TARGET_MAIN)
CONTIKI_TARGET_SOURCEFILES += contiki-z1-platform.c

MCU=msp430x2617
include $(CONTIKI)/cpu/msp430/Makefile.msp430

contiki-$(TARGET).a: ${addprefix $(OBJECTDIR)/,symbols.o}
#	$(AR) rcf $@ $^


NUMPAR=20
IHEXFILE=tmpimage.ihex

# If we are not running under Windows, we assume Linux
ifndef MOTELIST
  USBDEVPREFIX=
  SERIALDUMP = $(CONTIKI)/tools/sky/serialdump-linux
  MOTELIST = $(CONTIKI)/tools/z1/motelist-z1
  BSL = $(CONTIKI)/tools/z1/z1-bsl-nopic --z1
  BSL_FILETYPE = -I
  MOTES = $(shell $(MOTELIST) -c 2>&- | \
     cut -f 2 -d , | \
     perl -ne 'print $$1 . " " if(m-(/dev/\w+)-);')
  CMOTES=$(MOTES)
endif

z1-motelist:
	$(MOTELIST)
z1-motes:
	@echo $(MOTES)

ifdef MOTE
%.upload: %.ihex
	cp $< $(IHEXFILE)
	$(MAKE) z1-u.$(subst /,-,$(word $(MOTE), $(MOTES)))
else # MOTE
%.upload: %.ihex
	cp $< $(IHEXFILE)
	@echo $(MOTES)
	$(MAKE) z1-reset z1-upload
endif # MOTE

z1-upload: z1-reset
	$(MAKE) -j $(NUMPAR) z1-upload-sequence

z1-upload-sequence:	$(foreach PORT, $(MOTES), z1-u.$(subst /,-,$(PORT)))
	@echo Done

z1-reset:
	$(MAKE) -k -j $(NUMPAR) z1-reset-sequence

z1-reset-sequence:	$(foreach PORT, $(MOTES), z1-r.$(subst /,-,$(PORT)))
	@echo Done

z1-u.%:
	@echo +++++ Erasing $(subst -,/,$*); \
	$(BSL) -c $(subst -,/,$*) -e && sleep 2 ; \
	echo +++++ Programming $(subst -,/,$*) ; \
	$(BSL) -c $(subst -,/,$*) $(BSL_FILETYPE) -p $(IHEXFILE) && sleep 2 ; \
	echo +++++ Resetting $(subst -,/,$*) ; \
	$(BSL) -c $(subst -,/,$*) -r

z1-r.%:
	$(BSL) -c $(subst -,/,$*) -r

sizeplot:
	msp430-size $(OBJECTDIR)/*.o | $(CONTIKI)/tools/sky/check-size > size-data
	gnuplot $(CONTIKI)/tools/sky/plot-size
	gv size.pdf

winslip:
ifdef INTERFACE
	$(CONTIKI)/tools/wpcapslip/wpcapslip -s $(USBDEVPREFIX)$(firstword $(CMOTES)) $(INTERFACE) 172.16.0.0 255.255.0.0
else
	@echo "Usage: \"$(MAKE) $@ INTERFACE=<the IP address of a local network interface>\""
	@echo "Use the \"ipconfig\" command to find out the IP addresses of the local interfaces"
endif

linslip: $(CONTIKI)/tools/tunslip
	$(CONTIKI)/tools/tunslip -s $(USBDEVPREFIX)$(firstword $(CMOTES)) 172.16.0.0 255.255.0.0

$(CONTIKI)/tools/tunslip:
	(cd $(CONTIKI)/tools; $(MAKE) tunslip)

ifdef MOTE
serialdump:
	$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(word $(MOTE), $(CMOTES)) | $(CONTIKI)/tools/timestamp | tee serialdump-`date +%Y%m%d-%H%M`

serialview:
	$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(word $(MOTE), $(CMOTES)) | $(CONTIKI)/tools/timestamp

login:
	$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(word $(MOTE), $(CMOTES))
else
serialdump:
	$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(firstword $(CMOTES)) | $(CONTIKI)/tools/timestamp | tee serialdump-`date +%Y%m%d-%H%M`

serialview:
	$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(firstword $(CMOTES)) | $(CONTIKI)/tools/timestamp

login:
	$(SERIALDUMP) -b115200 $(USBDEVPREFIX)$(firstword $(CMOTES))
endif