/*
 * Copyright (c) 2010, Swedish Institute of Computer Science.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Institute nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This file is part of the Contiki operating system.
 *
 */

/**
 * \file
 *         Device drivers for tmp102 temperature sensor in Zolertia Z1.
 * \author
 *         Enric M. Calvo, Zolertia <ecalvo@zolertia.com>
 *         Marcus Lundén, SICS <mlunden@sics.se>
 */

#include <stdio.h>
#include "contiki.h"
#include "i2cmaster.h"
#include "tmp102.h"

/* Bitmasks and bit flag variable for keeping track of tmp102 status. */
enum TMP102_STATUSTYPES {
  /* must be a bit and not more, not using 0x00. */
  INITED = 0x01,
  RUNNING = 0x02,
  STOPPED = 0x04,
  LOW_POWER = 0x08,
  AAA = 0x10,     /* available to extend this... */
  BBB = 0x20,     /* available to extend this... */
  CCC = 0x40,     /* available to extend this... */
  DDD = 0x80      /* available to extend this... */
};
static enum TMP102_STATUSTYPES _TMP102_STATUS = 0x00;

/*---------------------------------------------------------------------------*/
/* PROCESS(tmp102_process, "Temperature Sensor process"); */

/*---------------------------------------------------------------------------*/
/* Init the temperature sensor: ports, pins, registers, interrupts (none enabled), I2C,
    default threshold values etc. */

void
tmp102_init(void)
{
  if(!(_TMP102_STATUS & INITED)) {
    PRINTFDEBUG("TMP102 init\n");
    _TMP102_STATUS |= INITED;
    /* Power Up TMP102 via pin */
    TMP102_PWR_DIR |= TMP102_PWR_PIN;
    TMP102_PWR_SEL &= ~TMP102_PWR_SEL;
    TMP102_PWR_SEL2 &= ~TMP102_PWR_SEL;
    TMP102_PWR_REN &= ~TMP102_PWR_SEL;
    TMP102_PWR_OUT |= TMP102_PWR_PIN;

    /* Set up ports and pins for I2C communication */
    i2c_enable();
  }
}
/*---------------------------------------------------------------------------*/
/* Write to a 16-bit register.
    args:
      reg       register to write to
      val       value to write
 */

void
tmp102_write_reg(uint8_t reg, uint16_t val)
{
  uint8_t tx_buf[] = { reg, 0x00, 0x00 };

  tx_buf[1] = (uint8_t)(val >> 8);
  tx_buf[2] = (uint8_t)(val & 0x00FF);

  i2c_transmitinit(TMP102_ADDR);
  while(i2c_busy());
  PRINTFDEBUG("I2C Ready to TX\n");

  i2c_transmit_n(3, tx_buf);
  while(i2c_busy());
  PRINTFDEBUG("WRITE_REG 0x%04X @ reg 0x%02X\n", val, reg);
}
/*---------------------------------------------------------------------------*/
/* Read register.
    args:
      reg       what register to read
    returns the value of the read register type uint16_t
 */

uint16_t
tmp102_read_reg(uint8_t reg)
{
  uint8_t buf[] = { 0x00, 0x00 };
  uint16_t retVal = 0;
  uint8_t rtx = reg;
  PRINTFDEBUG("READ_REG 0x%02X\n", reg);

  /* transmit the register to read */
  i2c_transmitinit(TMP102_ADDR);
  while(i2c_busy());
  i2c_transmit_n(1, &rtx);
  while(i2c_busy());

  /* receive the data */
  i2c_receiveinit(TMP102_ADDR);
  while(i2c_busy());
  i2c_receive_n(2, &buf[0]);
  while(i2c_busy());

  retVal = (uint16_t)(buf[0] << 8 | (buf[1]));

  return retVal;
}
/*---------------------------------------------------------------------------*/
/* Read temperature in a raw format. Further processing will be needed
   to make an interpretation of these 12 or 13-bit data, depending on configuration
 */

uint16_t
tmp102_read_temp_raw(void)
{
  uint16_t rd = 0;

  rd = tmp102_read_reg(TMP102_TEMP);

  return rd;
}
int16_t
tmp102_read_temp_x100(void)
{
  int16_t raw = 0;
  int16_t sign = 1;
  int16_t abstemp, temp_int;

  raw = (int16_t)tmp102_read_reg(TMP102_TEMP);
  if(raw < 0) {
    abstemp = (raw ^ 0xFFFF) + 1;
    sign = -1;
  } else {
    abstemp = raw;
  }

  /* Integer part of the temperature value and percents*/
  temp_int = (abstemp >> 8) * sign * 100;
  temp_int += ((abstemp & 0xff) * 100) / 0x100;

  /* See test-tmp102.c on how to print values of temperature with decimals
     fractional part in 1/10000 of degree
     temp_frac = ((abstemp >>4) % 16) * 625;
     Data could be multiplied by 63 to have less bit-growth and 1/1000 precision
     Data could be multiplied by 64 (<< 6) to trade-off precision for speed
   */

  return temp_int;
}
/*---------------------------------------------------------------------------*/
/* Simple Read temperature. Return is an integer with temperature in 1deg. precision
   Return value is a signed 8 bit integer.
 */

int8_t
tmp102_read_temp_simple(void)
{
  /* Casted to int8_t: We don't expect temperatures outside -128 to 127 C */
  return tmp102_read_temp_x100() / 100;
}