# Set this to the name of your sketch (without extension .pde)
SKETCH=sketch
EXE=arduino-example

all: $(EXE)

CONTIKI=../../..

# Contiki IPv6 configuration
CONTIKI_WITH_IPV6 = 1

CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\" -DARDUINO=100 -I./Adafruit-GFX-Library-master -I./Adafruit_SH1106-master -ffunction-sections -fdata-sections 

LDFLAGS += -Wl,--gc-sections

PROJECT_SOURCEFILES += ${SKETCH}.cpp \
    Adafruit-GFX-Library-master/Adafruit_GFX.cpp \
    Adafruit_SH1106-master/Adafruit_SH1106.cpp

#PROJECT_DIRS += Adafruit-GFX-Library-master 
#PROJECT_DIRS += SH1106-master

# automatically build RESTful resources
REST_RESOURCES_DIR = ./resources
REST_RESOURCES_DIR_COMMON = ../resources-common
REST_RESOURCES_FILES= $(notdir \
    $(shell find $(REST_RESOURCES_DIR) -name '*.c') \
    $(shell find $(REST_RESOURCES_DIR_COMMON) -name '*.c') \
    )

PROJECTDIRS += $(REST_RESOURCES_DIR) $(REST_RESOURCES_DIR_COMMON)
PROJECT_SOURCEFILES += $(REST_RESOURCES_FILES)

#ADA_GFX_DIR = Adafruit-GFX-Library-master
#ADA_GFX_FILES = $(shell find $(ADA_GFX_DIR) -name '*.c') \
#                $(shell find $(ADA_GFX_DIR) -name '*.cpp')
#
#PROJECTDIRS += $(ADA_GFX_DIR)
#PROJECT_SOURCEFILES += $(ADA_GFX_FILES)

#ADA_SSD_DIR = Adafruit_SSD1306-master
#ADA_SSD_FILES = $(shell find $(ADA_SSD_DIR) -name '*.c') \
#                $(shell find $(ADA_SSD_DIR) -name '*.cpp')
#
#PROJECTDIRS += $(ADA_SSD_DIR)
#PROJECT_SOURCEFILES += $(ADA_SSD_FILES)


# variable for Makefile.include
ifneq ($(TARGET), minimal-net)
CFLAGS += -DUIP_CONF_IPV6_RPL=1
else
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
${info INFO: compiling without RPL}
CFLAGS += -DUIP_CONF_IPV6_RPL=0
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
${info INFO: compiling with large buffers}
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
endif

# linker optimizations
SMALL=1


# REST Engine shall use Erbium CoAP implementation
APPS += er-coap
APPS += rest-engine
APPS += arduino json json-resource

include $(CONTIKI)/Makefile.include
include $(CONTIKI)/apps/arduino/Makefile.include

$(CONTIKI)/tools/tunslip6:      $(CONTIKI)/tools/tunslip6.c
	(cd $(CONTIKI)/tools && $(MAKE) tunslip6)

connect-router: $(CONTIKI)/tools/tunslip6
	sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64

connect-router-cooja:   $(CONTIKI)/tools/tunslip6
	sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64

connect-minimal:
	sudo ip address add fdfd::1/64 dev tap0