/* * Copyright (c) 2008, Swedish Institute of Computer Science * All rights reserved. * * Additional fixes for AVR contributed by: * Colin O'Flynn coflynn@newae.com * Eric Gnoske egnoske@gmail.com * Blake Leverett bleverett@gmail.com * Mike Vidales mavida404@gmail.com * Kevin Brown kbrown3@uccs.edu * Nate Bohlmann nate@elfwerks.com * * Additional fixes for MSP430 contributed by: * Joakim Eriksson * Niclas Finne * Nicolas Tsiftes * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of the copyright holders nor the names of * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /** * \addtogroup net * @{ */ /** * \defgroup frame802154 802.15.4 frame creation and parsing * @{ */ /** * \file * \brief 802.15.4 frame creation and parsing functions * * This file converts to and from a structure to a packed 802.15.4 * frame. * */ /* Includes */ #ifndef FRAME_802154_H #define FRAME_802154_H #include "contiki-conf.h" #include "net/linkaddr.h" #ifdef IEEE802154_CONF_PANID #define IEEE802154_PANID IEEE802154_CONF_PANID #else /* IEEE802154_CONF_PANID */ #define IEEE802154_PANID 0xABCD #endif /* IEEE802154_CONF_PANID */ #ifdef FRAME802154_CONF_VERSION #define FRAME802154_VERSION FRAME802154_CONF_VERSION #else /* FRAME802154_CONF_VERSION */ #define FRAME802154_VERSION FRAME802154_IEEE802154_2006 #endif /* FRAME802154_CONF_VERSION */ #ifdef FRAME802154_CONF_SUPPR_SEQNO #define FRAME802154_SUPPR_SEQNO FRAME802154_CONF_SUPPR_SEQNO #else /* FRAME802154_CONF_SUPPR_SEQNO */ #define FRAME802154_SUPPR_SEQNO 0 #endif /* FRAME802154_CONF_SUPPR_SEQNO */ /* Macros & Defines */ /** \brief These are some definitions of values used in the FCF. See the 802.15.4 spec for details. * \name FCF element values definitions * @{ */ #define FRAME802154_BEACONFRAME (0x00) #define FRAME802154_DATAFRAME (0x01) #define FRAME802154_ACKFRAME (0x02) #define FRAME802154_CMDFRAME (0x03) #define FRAME802154_BEACONREQ (0x07) #define FRAME802154_IEEERESERVED (0x00) #define FRAME802154_NOADDR (0x00) /**< Only valid for ACK or Beacon frames. */ #define FRAME802154_SHORTADDRMODE (0x02) #define FRAME802154_LONGADDRMODE (0x03) #define FRAME802154_NOBEACONS (0x0F) #define FRAME802154_BROADCASTADDR (0xFFFF) #define FRAME802154_BROADCASTPANDID (0xFFFF) #define FRAME802154_IEEE802154_2003 (0x00) #define FRAME802154_IEEE802154_2006 (0x01) #define FRAME802154_IEEE802154E_2012 (0x02) #define FRAME802154_SECURITY_LEVEL_NONE (0) #define FRAME802154_SECURITY_LEVEL_MIC_32 (1) #define FRAME802154_SECURITY_LEVEL_MIC_64 (2) #define FRAME802154_SECURITY_LEVEL_MIC_128 (3) #define FRAME802154_SECURITY_LEVEL_ENC (4) #define FRAME802154_SECURITY_LEVEL_ENC_MIC_32 (5) #define FRAME802154_SECURITY_LEVEL_ENC_MIC_64 (6) #define FRAME802154_SECURITY_LEVEL_ENC_MIC_128 (7) #define FRAME802154_IMPLICIT_KEY (0) #define FRAME802154_1_BYTE_KEY_ID_MODE (1) #define FRAME802154_5_BYTE_KEY_ID_MODE (2) #define FRAME802154_9_BYTE_KEY_ID_MODE (3) /** * @brief The IEEE 802.15.4 frame has a number of constant/fixed fields that * can be counted to make frame construction and max payload * calculations easier. * * These include: * 1. FCF - 2 bytes - Fixed * 2. Sequence number - 1 byte - Fixed * 3. Addressing fields - 4 - 20 bytes - Variable * 4. Aux security header - 0 - 14 bytes - Variable * 5. CRC - 2 bytes - Fixed */ /** * \brief Defines the bitfields of the frame control field (FCF). */ typedef struct { uint8_t frame_type; /**< 3 bit. Frame type field, see 802.15.4 */ uint8_t security_enabled; /**< 1 bit. True if security is used in this frame */ uint8_t frame_pending; /**< 1 bit. True if sender has more data to send */ uint8_t ack_required; /**< 1 bit. Is an ack frame required? */ uint8_t panid_compression; /**< 1 bit. Is this a compressed header? */ /* uint8_t reserved; */ /**< 1 bit. Unused bit */ uint8_t sequence_number_suppression; /**< 1 bit. Does the header omit sequence number?, see 802.15.4e */ uint8_t ie_list_present; /**< 1 bit. Does the header contain Information Elements?, see 802.15.4e */ uint8_t dest_addr_mode; /**< 2 bit. Destination address mode, see 802.15.4 */ uint8_t frame_version; /**< 2 bit. 802.15.4 frame version */ uint8_t src_addr_mode; /**< 2 bit. Source address mode, see 802.15.4 */ } frame802154_fcf_t; /** \brief 802.15.4 security control bitfield. See section 7.6.2.2.1 in 802.15.4 specification */ typedef struct { uint8_t security_level; /**< 3 bit. security level */ uint8_t key_id_mode; /**< 2 bit. Key identifier mode */ uint8_t frame_counter_suppression; /**< 1 bit. Frame counter suppression */ uint8_t frame_counter_size; /**< 1 bit. Frame counter size (0: 4 bytes, 1: 5 bytes) */ uint8_t reserved; /**< 3 bit. Reserved bits */ } frame802154_scf_t; typedef union { uint32_t u32; uint16_t u16[2]; uint8_t u8[4]; } frame802154_frame_counter_t; typedef union { uint16_t u16[4]; uint8_t u8[8]; } frame802154_key_source_t; /** \brief 802.15.4 Aux security header */ typedef struct { frame802154_scf_t security_control; /**< Security control bitfield */ frame802154_frame_counter_t frame_counter; /**< Frame counter, used for security */ frame802154_key_source_t key_source; /**< Key Source subfield */ uint8_t key_index; /**< Key Index subfield */ } frame802154_aux_hdr_t; /** \brief Parameters used by the frame802154_create() function. These * parameters are used in the 802.15.4 frame header. See the 802.15.4 * specification for details. */ typedef struct { /* The fields dest_addr and src_addr must come first to ensure they are aligned to the * CPU word size. Needed as they are accessed directly as linkaddr_t*. Note we cannot use * the type linkaddr_t directly here, as we always need 8 bytes, not LINKADDR_SIZE bytes. */ uint8_t dest_addr[8]; /**< Destination address */ uint8_t src_addr[8]; /**< Source address */ frame802154_fcf_t fcf; /**< Frame control field */ uint8_t seq; /**< Sequence number */ uint16_t dest_pid; /**< Destination PAN ID */ uint16_t src_pid; /**< Source PAN ID */ frame802154_aux_hdr_t aux_hdr; /**< Aux security header */ uint8_t *payload; /**< Pointer to 802.15.4 payload */ int payload_len; /**< Length of payload field */ } frame802154_t; /* Prototypes */ int frame802154_hdrlen(frame802154_t *p); int frame802154_create(frame802154_t *p, uint8_t *buf); int frame802154_parse(uint8_t *data, int length, frame802154_t *pf); /* Get current PAN ID */ uint16_t frame802154_get_pan_id(void); /* Set current PAN ID */ void frame802154_set_pan_id(uint16_t pan_id); /* Tells whether a given Frame Control Field indicates a frame with * source PANID and/or destination PANID */ void frame802154_has_panid(frame802154_fcf_t *fcf, int *has_src_pan_id, int *has_dest_pan_id); /* Check if the destination PAN ID, if any, matches ours */ int frame802154_check_dest_panid(frame802154_t *frame); /* Check is the address is a broadcast address, whatever its size */ int frame802154_is_broadcast_addr(uint8_t mode, uint8_t *addr); /* Check and extract source and destination linkaddr from frame */ int frame802154_extract_linkaddr(frame802154_t *frame, linkaddr_t *source_address, linkaddr_t *dest_address); /** @} */ #endif /* FRAME_802154_H */ /** @} */ /** @} */