# Set this to the name of your sketch (without extension .pde) SKETCH=sketch all: arduino-example \ arduino-example.osd-merkur.hex arduino-example.osd-merkur.eep # variable for this Makefile # configure CoAP implementation (3|7|12|13) (er-coap-07 also supports CoAP draft 08) WITH_COAP=13 # for some platforms UIP_CONF_IPV6=1 # IPv6 make config disappeared completely CFLAGS += -DUIP_CONF_IPV6=1 CONTIKI=../../.. CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\" PROJECT_SOURCEFILES += resource_door.c ${SKETCH}.cpp # variable for Makefile.include ifneq ($(TARGET), minimal-net) CFLAGS += -DUIP_CONF_IPV6_RPL=1 else # minimal-net does not support RPL under Linux and is mostly used to test CoAP only ${info INFO: compiling without RPL} CFLAGS += -DUIP_CONF_IPV6_RPL=0 CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\" ${info INFO: compiling with large buffers} CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048 CFLAGS += -DREST_MAX_CHUNK_SIZE=1024 CFLAGS += -DCOAP_MAX_HEADER_SIZE=640 endif # linker optimizations SMALL=1 # REST framework, requires WITH_COAP ifeq ($(WITH_COAP), 13) ${info INFO: compiling with CoAP-13} CFLAGS += -DWITH_COAP=13 CFLAGS += -DREST=coap_rest_implementation CFLAGS += -DUIP_CONF_TCP=0 APPS += er-coap-13 else ifeq ($(WITH_COAP), 12) ${info INFO: compiling with CoAP-12} CFLAGS += -DWITH_COAP=12 CFLAGS += -DREST=coap_rest_implementation CFLAGS += -DUIP_CONF_TCP=0 APPS += er-coap-12 else ifeq ($(WITH_COAP), 7) ${info INFO: compiling with CoAP-08} CFLAGS += -DWITH_COAP=7 CFLAGS += -DREST=coap_rest_implementation CFLAGS += -DUIP_CONF_TCP=0 APPS += er-coap-07 else ifeq ($(WITH_COAP), 3) ${info INFO: compiling with CoAP-03} CFLAGS += -DWITH_COAP=3 CFLAGS += -DREST=coap_rest_implementation CFLAGS += -DUIP_CONF_TCP=0 APPS += er-coap-03 else ${info INFO: compiling with HTTP} CFLAGS += -DWITH_HTTP CFLAGS += -DREST=http_rest_implementation CFLAGS += -DUIP_CONF_TCP=1 APPS += er-http-engine endif APPS += erbium time json arduino json-resource include $(CONTIKI)/Makefile.include include $(CONTIKI)/apps/arduino/Makefile.include arduino-example.osd-merkur.hex: arduino-example.osd-merkur avr-objcopy -j .text -j .data -O ihex arduino-example.osd-merkur \ arduino-example.osd-merkur.hex arduino-example.osd-merkur.eep: arduino-example.osd-merkur avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \ --change-section-lma .eeprom=0 -O ihex \ arduino-example.osd-merkur arduino-example.osd-merkur.eep flash: arduino-example.osd-merkur.hex arduino-example.osd-merkur.eep avrdude -pm128rfa1 -c arduino -P/dev/ttyUSB0 -b57600 -e -U \ flash:w:arduino-example.osd-merkur.hex:a -U \ eeprom:w:arduino-example.osd-merkur.eep:a .PHONY: flash $(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c (cd $(CONTIKI)/tools && $(MAKE) tunslip6) connect-router: $(CONTIKI)/tools/tunslip6 sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64 connect-router-cooja: $(CONTIKI)/tools/tunslip6 sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64 connect-minimal: sudo ip address add fdfd::1/64 dev tap0