/* * Copyright (c) 2014, Analog Devices, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * 3. Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. */ /** * \author Ian Martin */ #include #include #include #include "contiki.h" #include "net/netstack.h" #include "dev/serial-line.h" #include "net/ip/uip.h" #include "dev/button-sensor.h" #if NETSTACK_CONF_WITH_IPV6 #include "net/ipv6/uip-ds6.h" #endif /* NETSTACK_CONF_WITH_IPV6 */ #include "net/rime/rime.h" #include "uart0.h" #include "contiki-uart.h" #include "watchdog.h" #include "slip-arch.h" #if __GNUC__ #include "write.h" #endif SENSORS(&button_sensor); #ifndef SERIAL_ID #define SERIAL_ID { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08 } #endif static uint8_t serial_id[] = SERIAL_ID; static uint16_t node_id = 0x0102; /*---------------------------------------------------------------------------*/ static void set_rime_addr(void) { linkaddr_t addr; int i; memset(&addr, 0, sizeof(linkaddr_t)); #if NETSTACK_CONF_WITH_IPV6 memcpy(addr.u8, serial_id, sizeof(addr.u8)); #else if(node_id == 0) { for(i = 0; i < sizeof(linkaddr_t); ++i) { addr.u8[i] = serial_id[7 - i]; } } else { addr.u8[0] = node_id & 0xff; addr.u8[1] = node_id >> 8; } #endif linkaddr_set_node_addr(&addr); printf("Rime started with address "); for(i = 0; i < sizeof(addr.u8) - 1; i++) { printf("%d.", addr.u8[i]); } printf("%d" NEWLINE, addr.u8[i]); } /*---------------------------------------------------------------------------*/ int contiki_argc = 0; char **contiki_argv; static void delay_1sec(void) { /* Delay 1 second */ register unsigned long int i; for(i = 0x000FFFFFUL; i; --i) { asm ("nop"); } } int main(int argc, char **argv) { bool flip_flop = false; asm ("di"); /* Setup clocks */ CMC = 0x11U; /* Enable XT1, disable X1 */ CSC = 0x80U; /* Start XT1 and HOCO, stop X1 */ CKC = 0x00U; delay_1sec(); OSMC = 0x00; /* Supply fsub to peripherals, including Interval Timer */ uart0_init(); #if __GNUC__ /* Force linking of custom write() function: */ write(1, NULL, 0); #endif /* Setup 12-bit interval timer */ RTCEN = 1; /* Enable 12-bit interval timer and RTC */ ITMK = 1; /* Disable IT interrupt */ ITPR0 = 0; /* Set interrupt priority - highest */ ITPR1 = 0; ITMC = 0x8FFFU; /* Set maximum period 4096/32768Hz = 1/8 s, and start timer */ ITIF = 0; /* Clear interrupt request flag */ ITMK = 0; /* Enable IT interrupt */ /* asm ("ei"); / * Enable interrupts * / */ /* Disable analog inputs because they can conflict with the SPI buses: */ ADPC = 0x01; /* Configure all analog pins as digital I/O. */ PMC0 &= 0xF0; /* Disable analog inputs. */ clock_init(); /* Initialize Joystick Inputs: */ PM5 |= BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1); /* Set pins as inputs. */ PU5 |= BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1); /* Enable internal pull-up resistors. */ /* Initialize LED outputs: */ #define BIT(n) (1 << (n)) PM12 &= ~BIT(0); /* LED1 */ PM4 &= ~BIT(3); /* LED2 */ PM1 &= ~BIT(6); /* LED3 */ PM1 &= ~BIT(5); /* LED4 */ PM0 &= ~BIT(6); /* LED5 */ PM0 &= ~BIT(5); /* LED6 */ PM3 &= ~BIT(0); /* LED7 */ PM5 &= ~BIT(0); /* LED8 */ #if NETSTACK_CONF_WITH_IPV6 #if UIP_CONF_IPV6_RPL printf(CONTIKI_VERSION_STRING " started with IPV6, RPL" NEWLINE); #else printf(CONTIKI_VERSION_STRING " started with IPV6" NEWLINE); #endif #else printf(CONTIKI_VERSION_STRING " started" NEWLINE); #endif /* crappy way of remembering and accessing argc/v */ contiki_argc = argc; contiki_argv = argv; process_init(); process_start(&etimer_process, NULL); ctimer_init(); set_rime_addr(); queuebuf_init(); netstack_init(); printf("MAC %s RDC %s NETWORK %s" NEWLINE, NETSTACK_MAC.name, NETSTACK_RDC.name, NETSTACK_NETWORK.name); #if NETSTACK_CONF_WITH_IPV6 memcpy(&uip_lladdr.addr, serial_id, sizeof(uip_lladdr.addr)); process_start(&tcpip_process, NULL); printf("Tentative link-local IPv6 address "); { uip_ds6_addr_t *lladdr; int i; lladdr = uip_ds6_get_link_local(-1); for(i = 0; i < 7; ++i) { printf("%02x%02x:", lladdr->ipaddr.u8[i * 2], lladdr->ipaddr.u8[i * 2 + 1]); } /* make it hardcoded... */ lladdr->state = ADDR_AUTOCONF; printf("%02x%02x" NEWLINE, lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]); } #elif NETSTACK_CONF_WITH_IPV4 process_start(&tcpip_process, NULL); #endif serial_line_init(); autostart_start(autostart_processes); while(1) { watchdog_periodic(); if(NETSTACK_RADIO.pending_packet()) { int len; packetbuf_clear(); len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE); if(len > 0) { packetbuf_set_datalen(len); NETSTACK_RDC.input(); } } while(uart0_can_getchar()) { char c; UART_RX_LED = 1; c = uart0_getchar(); if(uart0_input_handler) { uart0_input_handler(c); } } UART_RX_LED = 0; process_run(); etimer_request_poll(); HEARTBEAT_LED1 = flip_flop; flip_flop = !flip_flop; HEARTBEAT_LED2 = flip_flop; } return 0; } /*---------------------------------------------------------------------------*/ void log_message(char *m1, char *m2) { printf("%s%s" NEWLINE, m1, m2); } /*---------------------------------------------------------------------------*/ void uip_log(char *m) { printf("%s" NEWLINE, m); } /*---------------------------------------------------------------------------*/