### Compiler definitions
CC       = sdcc
LD       = sdcc
AS       = sdcc
AR       = sdcclib
OBJCOPY  = objcopy
STRIP    = strip
PACKIHX  = packihx
BANK_ALLOC = $(CONTIKI)/cpu/cc2430/bank-alloc.py
SEGMENT_RULES = $(OBJECTDIR)/segment.rules

CFLAGS  += --model-$(MEMORY_MODEL) --stack-auto -DSDCC_CC2430 --std-c99
CFLAGS  += --fomit-frame-pointer

LDFLAGS += --model-$(MEMORY_MODEL) --stack-auto -DSDCC_CC2430 --out-fmt-ihx
LDFLAGS += --xram-loc 0xE000 --xram-size 0x1F00
LDFLAGS += --code-loc $(START_ADDR) --code-size $(CODE_SIZE)

ASFLAGS += -plosgff

AROPTS   = -a

### Our object files are .rel, so we can't use the default finalize dependency
### generation. Override here.
define FINALIZE_SDCC_DEPENDENCY
cp $(@:.rel=.d) $(@:.rel=.$$$$); \
sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \
    -e '/^$$/ d' -e 's/$$/ :/' < $(@:.rel=.$$$$) >> $(@:.rel=.d); \
rm -f $(@:.rel=.$$$$)
endef

### Banking Guesswork:
### Examples outside examples/sensinode do not specify banking.
### We automatically turn it on if its unspecified and if we are building with
### UIP_CONF_IPV6
ifndef HAVE_BANKING
  ifeq ($(UIP_CONF_IPV6),1)
    HAVE_BANKING=1
  else
    HAVE_BANKING=0
  endif
endif

### Does the project want us to offset the firmware?
### define start address and max code size accordingly, turn Disco on
ifeq ($(OFFSET_FIRMWARE),1)
  START_ADDR = 0x01000
  HOME_START = 00001000
  ifeq ($(HAVE_BANKING),1)
    CODE_SIZE = 0x1F000
  else
    CODE_SIZE = 0x0F000
  endif
else
  START_ADDR = 0x00000
  HOME_START = 00000000
  ifeq ($(HAVE_BANKING),1)
    CODE_SIZE = 0x20000
  else
    CODE_SIZE = 0x10000
  endif
endif

### Are we building with BANKing supoprt?
ifeq ($(HAVE_BANKING),1)
  ## Yes
  MEMORY_MODEL=huge
  LDFLAGS += -Wl-bBANK1=0x018000
  LD_POST_FLAGS += -Wl-bBANK2=0x028000
  LD_POST_FLAGS += -Wl-bBANK3=0x038000
  LDFLAGS += -Wl-r
  CFLAGS += -DHAVE_SDCC_BANKING
  #use this in $(call c_seg,$<) to get segment for a source file.
  c_seg = --codeseg $(shell python $(BANK_ALLOC) $1 $(SEGMENT_RULES) $2)
else
  ## No banking
  MEMORY_MODEL=large
  c_seg =
endif 

### CPU-dependent cleanup files
CLEAN += *.lnk *.lk *.sym *.lib *.ihx *.rel *.mem *.rst *.asm *.hex
CLEAN += *.omf *.cdb *.banks
CLEAN += symbols.c symbols.h

### CPU-dependent directories
CONTIKI_CPU_DIRS = . dev

### CPU-dependent source files
CONTIKI_SOURCEFILES += bus.c clock.c uart0.c uart1.c cc2430_rf.c dma.c
CONTIKI_SOURCEFILES += uart_intr.c cc2430_rf_intr.c dma_intr.c
CONTIKI_SOURCEFILES += watchdog-cc2430.c rtimer-arch.c stack.c
CONTIKI_ASMFILES +=

CONTIKI_ASMOBJECTFILES = $(addprefix $(OBJECTDIR)/,$(CONTIKI_ASMFILES:.S=.rel))

CONTIKI_CASMOBJECTFILES = $(addprefix $(OBJECTDIR)/, \
	$(CONTIKI_CASMFILES:.cS=.rel))

CONTIKI_PLATFORM_DIRS = $(PLATFORM_APPDIRS) \
	 $(addprefix $(CONTIKI)/platform/$(TARGET)/, $(CONTIKI_TARGET_DIRS))

CONTIKI_CPU_DIRS_LIST    = $(addprefix $(CONTIKI_CPU)/, \
                               $(CONTIKI_CPU_DIRS))

oname = $(patsubst %.c,%.rel,$(patsubst %.S,%.rel,$(1)))

CONTIKI_OBJECTFILES = $(addprefix $(OBJECTDIR)/, \
	$(call oname, $(CONTIKI_SOURCEFILES)))

PROJECT_OBJECTFILES = $(addprefix $(OBJECTDIR)/, \
	$(call oname, $(PROJECT_SOURCEFILES)))

### Compilation rules

SEGMENT_RULE_FILES = $(foreach dir, . $(CONTIKI_PLATFORM_DIRS) \
	$(CONTIKI_CPU_DIRS_LIST), $(wildcard $(dir)/segment.rules) )

# NB: Assumes SEGMENT_RULES was not overridden and is in $(OBJECTDIR)
$(SEGMENT_RULES): $(SEGMENT_RULE_FILES) | $(OBJECTDIR)
	cat $(SEGMENT_RULE_FILES) | \
	   sed -e 's/#.*$$//' -e 's/^\s*//' -e '/^$$/d' > $@

CUSTOM_RULE_LINK=1
CUSTOM_RULE_C_TO_OBJECTDIR_O=1
CUSTOM_RULE_ALLOBJS_TO_TARGETLIB=1

$(OBJECTDIR)/%.rel: %.c $(SEGMENT_RULES) | $(OBJECTDIR)
	$(CC) $(call c_seg,$<,$@) $(CFLAGS) -c $< -o $@ -Wp,-MMD,$(@:.rel=.d),-MQ,$@
	@$(FINALIZE_SDCC_DEPENDENCY)

$(OBJECTDIR)/%.rel: %.cS | $(OBJECTDIR)
	cp $< $(OBJECTDIR)/$*.c
	$(CC) $(CFLAGS) -E $(OBJECTDIR)/$*.c > $(OBJECTDIR)/tmp
	perl -pe "s/^#(.*)/;$$1/" $(OBJECTDIR)/tmp > $(OBJECTDIR)/$*.S
	$(AS) $(ASFLAGS) -o $@ $(OBJECTDIR)/$*.S
	rm -f $(OBJECTDIR)/tmp

contiki-$(TARGET).lib: $(CONTIKI_OBJECTFILES) $(PROJECT_OBJECTFILES) \
	$(CONTIKI_ASMOBJECTFILES) $(CONTIKI_CASMOBJECTFILES)
	rm -f $@
	for target in $^; do echo $$target >> $@; done

.PRECIOUS: %.$(TARGET) %.hex

# build app/example local object files. We need a separate rule so that we can
# pass -DAUTOSTART_ENABLE for those files only
$(OBJECTDIR)/%.app.rel: %.c $(SEGMENT_RULES) | $(OBJECTDIR)
	$(CC) $(call c_seg,$<,$@) -DAUTOSTART_ENABLE $(CFLAGS) -c $< -o $@

# .ihx is the sdcc binary output file
%.ihx: $(OBJECTDIR)/%.app.rel $(CONTIKI_TARGET_MAIN) contiki-$(TARGET).lib
# Automatic bank relocation when building banked code
ifeq ($(HAVE_BANKING),1)
	@echo "\nFirst Link"
	@echo "==============="
	$(CC) $(LDFLAGS) -o $@ $(CONTIKI_TARGET_MAIN) $(OBJECTDIR)/$*.app.rel -llibsdcc.lib -lcontiki-$(TARGET).lib > /dev/null
	@echo "\nBank Allocation"
	@echo "==============="
	python $(BANK_ALLOC) $(basename $(@F)) $(SEGMENT_RULES) $(OFFSET_FIRMWARE)
	@echo "\nFinal Link"
	@echo "==============="
endif
	$(CC) $(LDFLAGS) $(LD_POST_FLAGS) -o $@ $(CONTIKI_TARGET_MAIN) $(OBJECTDIR)/$*.app.rel -llibsdcc.lib -lcontiki-$(TARGET).lib > /dev/null

# Pack the hex file for programmers which dislike SDCC output hex format
%.hex: %.ihx
	@echo "\nPack hex file"
	@echo "==============="
ifeq ($(HAVE_BANKING),1)
	srec_cat -disable_sequence_warnings $< -intel -crop 0x10000 0x1FFFF -offset -0x10000 -o bank1.hex -intel
	srec_cat -disable_sequence_warnings $< -intel -crop 0x20000 0x2FFFF -offset -0x18000 -o bank2.hex -intel
	srec_cat -disable_sequence_warnings $< -intel -crop 0x30000 0x3FFFF -offset -0x20000 -o bank3.hex -intel
	srec_cat -disable_sequence_warnings $< -intel -crop 0x00000 0x0FFFF -o home.ihx -intel
	srec_cat home.ihx -intel bank1.hex -intel bank2.hex -intel bank3.hex -intel -o $@ -intel
	rm -f home.ihx bank1.hex bank2.hex bank3.hex
else
	$(PACKIHX) $< > $@
endif