#----------------------------------------------------------------------------- # $Id: gogoc.conf.in,v 1.1 2009/11/20 16:53:12 jasminko Exp $ #----------------------------------------------------------------------------- ########################## READ ME! ################################ # # Welcome to the gogoCLIENT configuration file. # In order to use the client, you need to modify the 'userid', 'passwd' and # 'server' parameters below depending on which of these situations applies: # # 1. If you created a Freenet6 account, enter your userid and password below. # Change the server name to "broker.freenet6.net" and auth_method to 'any'. # 2. If you would like to use Freenet6 without creating an account, # do not make any modifications and close this file. # 3. If this software was provided by your ISP, enter the userid, password and # server name provided by your ISP below. # ########################## BASIC CONFIGURATION ################################ # # User Identification and Password: # Specify your user name and password as provided by your ISP or Freenet6. # If you plan to connect anonymously, leave these values empty. # NOTE: Change auth_method option if you are using a username/password. # # userid= # passwd= # userid= passwd= # # gogoSERVER: # Specify a gogoSERVER name or IP address (provided by your ISP or # Freenet6). An optional port number can be added; the default port number # is 3653. # # Examples: # server=hostname # FQDN # server=A.B.C.D # IPv4 address # server=[X:X::X:X] # IPv6 address # server=hostname:port_number # server=A.B.C.D:port_number # server=[X:X::X:X]:port_number # # Freenet6 account holders should enter authenticated.freenet6.net, # otherwise use anonymous.freenet6.net. # Your ISP may provide you with a different server name. # #server=anonymous.freenet6.net #server=authenticated.freenet6.net server=amsterdam.freenet6.net # # Authentication Method: # # auth_method=<{anonymous}|{any|passdss-3des-1|digest-md5|plain}> # # anonymous: Sends no username or password # # any: The most secure method will be used. # passdss-3des-1: The password is sent encrypted. # digest-md5: The password is sent encrypted. # plain: Both username and password are sent as plain text. # # Recommended values: # - any: If you are authenticating a username / password. # - anonymous: If you are connecting anonymously. # #auth_method=anonymous auth_method=any ########################## ROUTING CONFIGURATION ############################## # Use these parameters when you wish the client to act as a router and provide # IPv6 connectivity to IPv6-capable devices on your network. # # Local Host Type: # Change this value to 'router' to enable IPv6 advertisements. # # host_type= # host_type=router #host # # Prefix Length: # Length of the requested prefix. Valid values range between 0 and 64 when # using V6*V4 tunnel modes, and between 0 and 32 when using V4V6 tunnel mode. # # prefixlen= # prefixlen=64 # # Advertisement Interface Prefix: # Name of the interface that will be configured to send router advertisements. # This is an interface index on Windows (ex: 4) and a name on Linux # and BSD (ex: eth1 or fxp1). # # if_prefix= # if_prefix=tun0 # # DNS Server: # A DNS server list to which the reverse prefix will be delegated. Servers # are separated by the colon(:) delimiter. # # Example: dns_server=ns1.domain:ns2.domain:ns3.domain # dns_server= ######################### ADVANCED CONFIGURATION ############################## # # gogoCLIENT Installation Directory: # Directory where the gogoCLIENT will be installed. This value has been # set during installation. # gogoc_dir= # # Auto-Retry Connect, Retry Delay and Max Retry Delay: # When auto_retry_connect=yes, the gogoCLIENT will attempt to reconnect # after a disconnection occurred. The time to wait is 'retry_delay' and that # delay is doubled at every 3 failed consecutive reconnection attempt. # However, the wait delay will never exceed retry_delay_max. # # # auto_retry_connect= # retry_delay= # retry_delay_max= # # Recommended values: "yes", 30, 300 # auto_retry_connect=yes retry_delay=30 retry_delay_max=300 # # Keepalive Feature and Message Interval: # Indicates if and how often the client will send data to keep the tunnel # active. # # keepalive= # keepalive_interval= # # Recommended values: "yes" and 30 # keepalive=yes keepalive_interval=30 # # Tunnel Encapsulation Mode: # v6v4: IPv6-in-IPv4 tunnel. # v6udpv4: IPv6-in-UDP-in-IPv4 tunnel (for clients behind a NAT). # v6anyv4: Lets the broker choose the best mode for IPv6 tunnel. # v4v6: IPv4-in-IPv6 tunnel. # # Recommended value: v6anyv4 # tunnel_mode=v6anyv4 # # Tunnel Interface Name: # The interface name assigned to the tunnel. This value is O/S dependent. # # if_tunnel_v6v4 is the tunnel interface name for v6v4 encapsulation mode # if_tunnel_v6udpv4 is the tunnel interface name for v6udpv4 encapsulate mode # if_tunnel_v4v6 is the tunnel interface name for v4v6 encapsulation mode # # Default values are set during installation. # if_tunnel_v6v4=sit1 if_tunnel_v6udpv4=sit if_tunnel_v4v6=sit0 # # Local IP Address of the Client: # Allows you to set a specific address as the local tunnel endpoint. # # client_v4= # client_v6= # auto: The gogoCLIENT will find the local IP address endpoint. # # Recommended value: auto # client_v4=auto client_v6=auto # # Script Name: # File name of the script to run to install the tunnel interface. The # scripts are located in the template directory under the client # installation directory. # # template= # # Default value is set during installation. # template=linux # # Proxy client: # Indicates that this client will request a tunnel for another endpoint, # such as a Cisco router. # # proxy_client= # # NOTE: NAT traversal is not possible in proxy mode. # proxy_client=no ############################ BROKER REDIRECTION ############################### # # Broker List File Name: # The 'broker_list' directive specifies the filename where the broker # list received during broker redirection will be saved. # # broker_list= # broker_list=/var/lib/gogoc/tsp-broker-list.txt # # Last Server Used File Name: # The 'last_server' directive specifies the filename where the address of # the last broker to which a connection was successfully established will # be saved. # # last_server= # last_server=/var/lib/gogoc/tsp-last-server.txt # # Always Use Last Known Working Server: # The value of the 'always_use_same_server' directive determines whether the # client should always try to connect to the broker found in the # 'last_server' directive filename. # # always_use_same_server= # always_use_same_server=no #################################### LOGGING ################################## # # Log Verbosity Configuration: # The format is 'log_=level', where possible values for # 'destination' are: # # - console (logging to the console [AKA stdout]) # - stderr (logging to standard error) # - file (logging to a file) # - syslog (logging to syslog [Unix only]) # # and 'level' is a digit between 0 and 3. A 'level' value of 0 disables # logging to the destination, while values 1 to 3 request increasing levels # of log verbosity and detail. If 'level' is not specified, a value of 1 is # assumed. # # Example: # log_file=3 (Maximal logging to a file) # log_stderr=0 (Logging to standard error disabled) # log_console= (Minimal logging to the console) # # - Default configuration on Windows platforms: # # log_console=0 # log_stderr=0 # log_file=1 # # - Default configuration on Unix platforms: # # log_console=0 # log_stderr=1 # log_file=0 # log_syslog=0 # log_console=3 log_stderr=0 #log_file= #log_syslog= # # Log File Name: # When logging to file is requested using the 'log_file' directive, the name # and path of the file to use may be specified using this directive. # # log_filename= # log_filename=/var/log/gogoc/gogoc.log # # Log File Rotation: # When logging to file is requested using the 'log_file' directive, log file # rotation may be enabled. When enabled, the contents of the log file will # be moved to a backup file just before it reaches the maximum log file size # specified via this directive. # # The name of the backup file is the name of the original log file with # '.' inserted before the file extension. If the file does not # have an extension, '.' is appended to the name of the original # log file. The timestamp specifies when the rotation occurred. # # After the contents of the log file have been moved to the backup file, the # original file is cleared, and logging resumes at the beginning of the file. # # log_rotation= # log_rotation=yes # # Log File Rotation Size: # The 'log_rotation_size' directive specifies the maximum size a log file may # reach before rotation occurs, if enabled. The value is expressed in # kilobytes. # # log_rotation_size=<16|32|128|1024> # log_rotation_size=32 # # Deletion of rotated log files: # The 'log_rotation_delete' directive specifies that no log backup will be # kept. When rotation occurs, the file is immediately wiped out and a new # log file is started. # # log_rotation_delete= # log_rotation_delete=no # # Syslog Logging Facility [Unix Only]: # When logging to syslog is requested using the 'log_syslog' directive, the # facility to use may be specified using this directive. # # syslog_facility= # syslog_facility=USER # end of gogoc.conf #------------------------------------------------------------------------------