CONTIKI_TARGET_DIRS = . apps net loader dev/usb dev/serial CONTIKI_CORE=contiki-raven-main CONTIKI_TARGET_MAIN = ${CONTIKI_CORE}.o #USB Ethernet Interface + USB Serial Port TX Only USB = uart_usb_lib.c \ cdc_task.c \ rndis_task.c \ rndis.c \ cdc_eem.c \ cdc_ecm.c \ usb_descriptors.c \ usb_drv.c \ usb_specific_request.c \ usb_standard_request.c \ usb_task.c #Files needed for USB Mass storage device enumeration USB += scsi_decoder.c ctrl_access.c storage_task.c avr_flash.c #As of September 2010 the following are needed for rpl. They need explicit inclusion if CONTIKI_NO_NET=1 #If CONTIKI_NO_NET=1 the tcpip_input routine in tcpip.c must be commented out; it expects a tcpip process and conflicts with the one in fakeuip.c #RPL = rpl.c rpl-dag.c rpl-icmp6.c rpl-timers.c rpl-of-etx.c uip-ds6.c uip-icmp6.c uip-nd6.c uip6.c neighbor-info.c neighbor-attr.c tcpip.c uip-split.c psock.c CONTIKI_TARGET_SOURCEFILES += cfs-eeprom.c eeprom.c random.c \ mmem.c contiki-raven-default-init-lowlevel.c \ contiki-raven-default-init-net.c contiki-raven-main.c httpd-simple-avr.c \ sicslow_ethernet.c queuebuf.c packetbuf.c rng.c \ $(RPL) \ $(USB) USB_INCLUDES = -I$(CONTIKI_CPU)/dev/usb CONTIKIAVR=$(CONTIKI)/cpu/avr CONTIKIBOARD=. CONTIKI_PLAT_DEFS = -DF_CPU=8000000UL -DAVRGCC -DAUTO_CRC_PADDING=2 -DJACKDAW=1 MCU=at90usb1287 AVRDUDE_PROGRAMMER=jtag2 # For usb devices, you may either use PORT=usb, or (e.g. if you have more than one # programmer connected) you can use the following trick to find out the serial number: # # The example is for an JTAGICE mkII used to program an ATmega128: # avrdude -v -P usb:xxxx -c jtag2 -p atmega128 AVRDUDE_PORT=usb:00B000000D79 # Additional avrdude options # Verify off AVRDUDE_OPTIONS=-V include $(CONTIKIAVR)/Makefile.avr include $(CONTIKIAVR)/radio/Makefile.radio