/** ****************************************************************************** * @file spirit1_appli.h * @author System Lab - NOIDA * @version V1.1.0 * @date 14-Aug-2014 * @brief Header for spirit1_appli.c module ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2014 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __SPIRIT1_APPLI_H #define __SPIRIT1_APPLI_H /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx_hal.h" #include "radio_shield_config.h" #include "MCU_Interface.h" #include "SPIRIT_Config.h" #include "stm32l1xx_nucleo.h" /* Exported macro ------------------------------------------------------------*/ #if defined(X_NUCLEO_IDS01A3) #define USE_SPIRIT1_433MHz #elif defined(X_NUCLEO_IDS01A4) #define USE_SPIRIT1_868MHz #elif defined(X_NUCLEO_IDS01A5) #define USE_SPIRIT1_915MHz #else #error SPIRIT1 Nucleo Shield undefined or unsupported #endif /* Uncomment the Link Layer features to be used */ // #define USE_AUTO_ACK // #define USE_AUTO_ACK_PIGGYBACKING // #define USE_AUTO_RETRANSMISSION #if defined(USE_AUTO_ACK)&& defined(USE_AUTO_ACK_PIGGYBACKING)&& defined(USE_AUTO_RETRANSMISSION) #define USE_STack_PROTOCOL /* LLP configuration parameters */ #define EN_AUTOACK S_ENABLE #define EN_PIGGYBACKING S_ENABLE #define MAX_RETRANSMISSIONS PKT_N_RETX_2 #else #define USE_BASIC_PROTOCOL #endif /* Uncomment the system Operating mode */ //#define USE_LOW_POWER_MODE #if defined (USE_LOW_POWER_MODE) #define LPM_ENABLE #define MCU_STOP_MODE //#define MCU_SLEEP_MODE //#define RF_STANDBY #endif /* Exported constants --------------------------------------------------------*/ /* Radio configuration parameters */ #define XTAL_OFFSET_PPM 0 #define INFINITE_TIMEOUT 0.0 #ifdef USE_SPIRIT1_433MHz #define BASE_FREQUENCY 433.0e6 #endif #ifdef USE_SPIRIT1_868MHz #define BASE_FREQUENCY 868.0e6 #endif #ifdef USE_SPIRIT1_915MHz //#define BASE_FREQUENCY 915.0e6 #define BASE_FREQUENCY 902.0e6 #endif /* Addresses configuration parameters */ #define EN_FILT_MY_ADDRESS S_DISABLE #define MY_ADDRESS 0x34 #define EN_FILT_MULTICAST_ADDRESS S_DISABLE #define MULTICAST_ADDRESS 0xEE #define EN_FILT_BROADCAST_ADDRESS S_DISABLE #define BROADCAST_ADDRESS 0xFF #define DESTINATION_ADDRESS 0x44 #define EN_FILT_SOURCE_ADDRESS S_DISABLE #define SOURCE_ADDR_MASK 0xf0 #define SOURCE_ADDR_REF 0x37 #define APPLI_CMD 0x11 #define NWK_CMD 0x22 #define LED_TOGGLE 0xff #define ACK_OK 0x01 #define MAX_BUFFER_LEN 96 #define TIME_TO_EXIT_RX 3000 #define DELAY_RX_LED_TOGGLE 200 #define DELAY_TX_LED_GLOW 1000 #define LPM_WAKEUP_TIME 100 #define DATA_SEND_TIME 30 #define PREAMBLE_LENGTH PKT_PREAMBLE_LENGTH_04BYTES #define SYNC_LENGTH PKT_SYNC_LENGTH_4BYTES #define CONTROL_LENGTH PKT_CONTROL_LENGTH_0BYTES #define EN_ADDRESS S_DISABLE #define EN_FEC S_DISABLE #define CHANNEL_NUMBER 0 #define LENGTH_TYPE PKT_LENGTH_VAR #define POWER_INDEX 7 #define RECEIVE_TIMEOUT 2000.0 /*change the value for required timeout period*/ #define RSSI_THRESHOLD -120 #define POWER_DBM 11.6 #define CHANNEL_SPACE 100e3 #define FREQ_DEVIATION 127e3 #define BANDWIDTH 540.0e3 #define MODULATION_SELECT GFSK_BT1 #define DATARATE 250000 #define XTAL_OFFSET_PPM 0 #define SYNC_WORD 0x88888888 #define LENGTH_WIDTH 8 #define CRC_MODE PKT_CRC_MODE_16BITS_2 #define EN_WHITENING S_DISABLE #define INFINITE_TIMEOUT 0.0 /* Exported types ------------------------------------------------------------*/ //extern LPTIM_HandleTypeDef LptimHandle; extern volatile FlagStatus xRxDoneFlag, xTxDoneFlag; extern volatile FlagStatus PushButtonStatusWakeup; extern uint16_t wakeupCounter; extern uint16_t dataSendCounter ; extern volatile FlagStatus PushButtonStatusData, datasendFlag; typedef struct sRadioDriver { void ( *Init )( void ); void ( *GpioIrq )( SGpioInit *pGpioIRQ ); void ( *RadioInit )( SRadioInit *pRadioInit ); void ( *SetRadioPower )( uint8_t cIndex, float fPowerdBm ); void ( *PacketConfig )( void ); void ( *SetPayloadLen )( uint8_t length); void ( *SetDestinationAddress )( uint8_t address); void ( *EnableTxIrq )( void ); void ( *EnableRxIrq )( void ); void ( *DisableIrq )(void); void ( *SetRxTimeout )( float cRxTimeout ); void ( *EnableSQI )(void); void ( *SetRssiThreshold)(int dbmValue); void ( *ClearIrqStatus )(void); void ( *StartRx )( void ); void ( *StartTx )( uint8_t *buffer, uint8_t size ); void ( *GetRxPacket )( uint8_t *buffer, uint8_t size ); }RadioDriver_t; typedef struct sMCULowPowerMode { void ( *McuStopMode )( void ); void ( *McuStandbyMode )( void ); void ( *McuSleepMode )( void ); }MCULowPowerMode_t; typedef struct sRadioLowPowerMode { void ( *RadioShutDown )( void ); void ( *RadioStandBy )( void ); void ( *RadioSleep ) ( void ); void ( *RadioPowerON )( void ); }RadioLowPowerMode_t; typedef struct { uint8_t Cmdtag; uint8_t CmdType; uint8_t CmdLen; uint8_t Cmd; uint8_t DataLen; uint8_t* DataBuff; }AppliFrame_t; /* Exported functions ------------------------------------------------------- */ void HAL_Spirit1_Init(void); void Enter_LP_mode(void); void Exit_LP_mode(void); void MCU_Enter_StopMode(void); void MCU_Enter_StandbyMode(void); void MCU_Enter_SleepMode(void); void RadioPowerON(void); void RadioPowerOFF(void); void RadioStandBy(void); void RadioSleep(void); void SPIRIT1_Init(void); void BasicProtocolInit(void); void Set_KeyStatus(FlagStatus val); #endif /* __SPIRIT1_APPLI_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/