/* * Copyright (c) 2014, Ingo Gulyas Intembsys * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * This file is part of the Contiki operating system. * */ /** * \file * I2C driver for ATMEGA128rfa1 * * \author * Ingo Gulyas Intembsys * office@intembsys.at * www.intembsys.at */ #ifndef I2C_H_ #define I2C_H_ #include <stdint.h> //////////////////////////////////////////////////////////////////////////////////////////// // CONFIGURATION SECTION: #define I2C_TD 0 // compiler switch: i2c testdriver code #define I2C_PORT PORTD #define I2C_DDR DDRD #define I2C_SCL_PIN 0 #define I2C_SDA_PIN 1 // END OF CONFIGURATION SECTION //////////////////////////////////////////////////////////////////////////////////////////// #define I2C_INIT() ({I2C_DDR &= ~((1<<I2C_SCL_PIN) | (1<<I2C_SDA_PIN)); I2C_PORT |= ((1<<I2C_SCL_PIN) | (1<<I2C_SDA_PIN));}) #define I2C_DEINIT() ({I2C_DDR &= ~((1<<I2C_SCL_PIN) | (1<<I2C_SDA_PIN)); I2C_PORT |= ((1<<I2C_SCL_PIN) | (1<<I2C_SDA_PIN));}) #define I2C_FREQ_STANDARD I2C_FREQ_50KHZ #if F_CPU == 16000000UL #define I2C_FREQ_400KHZ 0x03 #define I2C_FREQ_250KHZ 0x06 #define I2C_FREQ_100KHZ 0x12 #define I2C_FREQ_50KHZ 0x26 #define I2C_FREQ_10KHZ 0xC6 #else #error "NO I2C FREQUENCY DEFINED -> CHECK F_CPU SETTINGS!" #endif #define I2C_STATUS_REG TWSR #define I2C_TX_REG TWDR #define I2C_RX_REG TWDR #define I2C_START() (TWCR = (1<<TWINT) |(1<<TWSTA) | (1<<TWEN)) #define I2C_STOP() (TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO)) #define I2C_WRITE_BYTE() (TWCR = (1<<TWINT) | (1<<TWEN)) #define I2C_READ_BYTE_ACK() (TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA)) #define I2C_READ_BYTE_NACK() (TWCR = (1<<TWINT) | (1<<TWEN)) #define I2C_STATUS() (I2C_STATUS_REG & I2C_STATUS_MASK) #define I2C_STATUS_MASK 0xF8 #define I2C_STATUS_START 0x08 #define I2C_STATUS_START_REP 0x10 #define I2C_STATUS_SLAW_ACK 0x18 #define I2C_STATUS_DATAW_ACK 0x28 #define I2C_STATUS_SLAR_ACK 0x40 #define I2C_STATUS_DATAR_ACK 0x50 #define I2C_STATUS_DATAR_NACK 0x58 #define I2C_ADR_WR(adr) ((adr<<1) & ~(1<<0)) #define I2C_ADR_RD(adr) ((adr<<1) | (1<<0)) #define I2C_CMD_FLAG_NONE 0x00 #define I2C_CMD_FLAG_START (1<<0) #define I2C_CMD_FLAG_STOP (1<<1) #define I2C_OK 0 #define I2C_ERROR_DRIVER -1 #define I2C_ERROR_TIMEOUT -2 #define I2C_ERROR_START -3 #define I2C_ERROR_WRITE -4 #define I2C_ERROR_READ -5 #define I2C_IOCTL_CMD_SET_FREQ 0x01 typedef struct i2c_driver i2c_driver; struct i2c_driver { int8_t (*ioctl)(const i2c_driver* const me, uint8_t cmd, uint8_t arg); int8_t (*read)(const i2c_driver* const me, uint8_t cmd_flags, uint8_t* buffer, uint8_t len); int8_t (*write)(const i2c_driver* const me, uint8_t cmd_flags, const uint8_t* data, uint8_t len); }; i2c_driver* i2c_open(void); void i2c_close(i2c_driver* const me); void i2c_reset(void); #endif /* I2C_H_ */