/* * Copyright (c) 2006, Technical University of Munich * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * This file is part of the Contiki operating system. * * @(#)$$ */ /** * \file * Configuration for Atmel Raven * * \author * Simon Barner * David Kopf */ #ifndef __CONTIKI_CONF_H__ #define __CONTIKI_CONF_H__ /* MCU and clock rate */ #define PLATFORM PLATFORM_AVR #define RAVEN_REVISION RAVEN_D #ifndef F_CPU #define F_CPU 8000000UL #endif #include typedef int32_t s32_t; typedef unsigned char u8_t; typedef unsigned short u16_t; typedef unsigned long u32_t; typedef unsigned short clock_time_t; typedef unsigned short uip_stats_t; typedef unsigned long off_t; void clock_delay(unsigned int us2); void clock_wait(int ms10); void clock_set_seconds(unsigned long s); unsigned long clock_seconds(void); /* Maximum timer interval for 16 bit clock_time_t */ #define INFINITE_TIME 0xffff /* Clock ticks per second */ #define CLOCK_CONF_SECOND 128 /* Maximum tick interval is 0xffff/128 = 511 seconds */ #define RIME_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME INFINITE_TIME/CLOCK_CONF_SECOND /* Default uses 600 */ #define COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME INFINITE_TIME/CLOCK_CONF_SECOND /* Default uses 600 */ /* The 1284p can use TIMER2 with the external 32768Hz crystal to keep time. Else TIMER0 is used. */ /* The sleep timer in raven-lcd.c also uses the crystal and adds a TIMER2 interrupt routine if not already define by clock.c */ #define AVR_CONF_USE32KCRYSTAL 1 /* Rtimer is implemented through the 16 bit Timer1, clocked at F_CPU through a 1024 prescaler. */ /* This gives 7812 counts per second, 128 microsecond precision and maximum interval 8.388 seconds. */ /* Change clock source and prescaler for greater precision and shorter maximum interval. */ /* 0 will disable the Rtimer code */ //#define RTIMER_ARCH_PRESCALER 256UL /*0, 1, 8, 64, 256, 1024 */ /* COM port to be used for SLIP connection. Not tested on Raven */ #define SLIP_PORT RS232_PORT_0 /* Pre-allocated memory for loadable modules heap space (in bytes)*/ /* Default is 4096. Currently used only when elfloader is present. Not tested on Raven */ //#define MMEM_CONF_SIZE 256 /* Starting address for code received via the codeprop facility. Not tested on Raven */ //#define EEPROMFS_ADDR_CODEPROP 0x8000 /* RADIO_CONF_CALIBRATE_INTERVAL is used in rf230bb and clock.c. If nonzero a 256 second interval is used */ /* Calibration is automatic when the radio wakes so is not necessary when the radio periodically sleeps */ //#define RADIO_CONF_CALIBRATE_INTERVAL 256 /* RADIOSTATS is used in rf230bb, clock.c and the webserver cgi to report radio usage */ #define RADIOSTATS 1 /* Possible watchdog timeouts depend on mcu. Default is WDTO_2S. -1 Disables the watchdog. */ //#define WATCHDOG_CONF_TIMEOUT -1 /* Network setup. The new NETSTACK interface requires RF230BB (as does ip4) */ #if RF230BB #undef PACKETBUF_CONF_HDR_SIZE //Use the packetbuf default for header size #else #define PACKETBUF_CONF_HDR_SIZE 0 //RF230 combined driver/mac handles headers internally #endif /*RF230BB */ #if UIP_CONF_IPV6 #define RIMEADDR_CONF_SIZE 8 #define UIP_CONF_ICMP6 1 #define UIP_CONF_UDP 1 #define UIP_CONF_TCP 1 //#define UIP_CONF_IPV6_RPL 0 #define NETSTACK_CONF_NETWORK sicslowpan_driver #define SICSLOWPAN_CONF_COMPRESSION SICSLOWPAN_COMPRESSION_HC06 #else /* ip4 should build but is largely untested */ #define RIMEADDR_CONF_SIZE 2 #define NETSTACK_CONF_NETWORK rime_driver #endif /* UIP_CONF_IPV6 */ /* See uip-ds6.h */ #define UIP_CONF_DS6_NBR_NBU 20 #define UIP_CONF_DS6_DEFRT_NBU 2 #define UIP_CONF_DS6_PREFIX_NBU 3 #define UIP_CONF_DS6_ROUTE_NBU 20 #define UIP_CONF_DS6_ADDR_NBU 3 #define UIP_CONF_DS6_MADDR_NBU 0 #define UIP_CONF_DS6_AADDR_NBU 0 #define UIP_CONF_LL_802154 1 #define UIP_CONF_LLH_LEN 0 /* 10 bytes per stateful address context - see sicslowpan.c */ /* Default is 1 context with prefix aaaa::/64 */ /* These must agree with all the other nodes or there will be a failure to communicate! */ #define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1 #define SICSLOWPAN_CONF_ADDR_CONTEXT_0 {addr_contexts[0].prefix[0]=0xaa;addr_contexts[0].prefix[1]=0xaa;} #define SICSLOWPAN_CONF_ADDR_CONTEXT_1 {addr_contexts[1].prefix[0]=0xbb;addr_contexts[1].prefix[1]=0xbb;} #define SICSLOWPAN_CONF_ADDR_CONTEXT_2 {addr_contexts[2].prefix[0]=0x20;addr_contexts[2].prefix[1]=0x01;addr_contexts[2].prefix[2]=0x49;addr_contexts[2].prefix[3]=0x78,addr_contexts[2].prefix[4]=0x1d;addr_contexts[2].prefix[5]=0xb1;} /* 211 bytes per queue buffer */ #define QUEUEBUF_CONF_NUM 8 /* 54 bytes per queue ref buffer */ #define QUEUEBUF_CONF_REF_NUM 2 /* Take the default TCP maximum segment size for efficiency and simpler wireshark captures */ /* Use this to prevent 6LowPAN fragmentation (whether or not fragmentation is enabled) */ //#define UIP_CONF_TCP_MSS 48 /* 30 bytes per TCP connection */ /* 6LoWPAN does not do well with concurrent TCP streams, as new browser GETs collide with packets coming */ /* from previous GETs, causing decreased throughput, retransmissions, and timeouts. Increase to study this. */ #define UIP_CONF_MAX_CONNECTIONS 1 /* 2 bytes per TCP listening port */ #define UIP_CONF_MAX_LISTENPORTS 1 /* 25 bytes per UDP connection */ #define UIP_CONF_UDP_CONNS 10 #define UIP_CONF_IP_FORWARD 0 #define UIP_CONF_FWCACHE_SIZE 0 #define UIP_CONF_IPV6_CHECKS 1 #define UIP_CONF_IPV6_QUEUE_PKT 1 #define UIP_CONF_IPV6_REASSEMBLY 0 #define UIP_CONF_UDP_CHECKSUMS 1 #define UIP_CONF_TCP_SPLIT 1 #define UIP_CONF_DHCP_LIGHT 1 #if 1 /* No radio cycling */ #define NETSTACK_CONF_MAC nullmac_driver #define NETSTACK_CONF_RDC sicslowmac_driver #define NETSTACK_CONF_FRAMER framer_802154 #define NETSTACK_CONF_RADIO rf230_driver #define CHANNEL_802_15_4 26 #define RADIO_CONF_CALIBRATE_INTERVAL 256 /* AUTOACK receive mode gives better rssi measurements, even if ACK is never requested */ #define RF230_CONF_AUTOACK 1 /* Request 802.15.4 ACK on all packets sent (else autoretry). This is primarily for testing. */ #define SICSLOWPAN_CONF_ACK_ALL 0 /* Number of auto retry attempts+1, 1-16. Set zero to disable extended TX_ARET_ON mode with CCA) */ #define RF230_CONF_AUTORETRIES 3 /* Number of CSMA attempts 0-7. 802.15.4 2003 standard max is 5. */ #define RF230_CONF_CSMARETRIES 5 /* CCA theshold energy -91 to -61 dBm (default -77). Set this smaller than the expected minimum rssi to avoid packet collisions */ /* The Jackdaw menu 'm' command is helpful for determining the smallest ever received rssi */ #define RF230_CONF_CCA_THRES -85 /* Allow 6lowpan fragments (needed for large TCP maximum segment size) */ #define SICSLOWPAN_CONF_FRAG 1 /* Most browsers reissue GETs after 3 seconds which stops fragment reassembly so a longer MAXAGE does no good */ #define SICSLOWPAN_CONF_MAXAGE 3 /* How long to wait before terminating an idle TCP connection. Smaller to allow faster sleep. Default is 120 seconds */ #define UIP_CONF_WAIT_TIMEOUT 5 #elif 1 /* Contiki-mac radio cycling */ #define NETSTACK_CONF_MAC nullmac_driver //#define NETSTACK_CONF_MAC csma_driver #define NETSTACK_CONF_RDC contikimac_driver #define NETSTACK_CONF_FRAMER framer_802154 #define NETSTACK_CONF_RADIO rf230_driver #define CHANNEL_802_15_4 26 /* The radio needs to interrupt during an rtimer interrupt */ #define RTIMER_CONF_NESTED_INTERRUPTS 1 #define RF230_CONF_AUTOACK 1 #define RF230_CONF_AUTORETRIES 1 #define RF230_CONF_CSMARETRIES 1 #define CONTIKIMAC_CONF_RADIO_ALWAYS_ON 0 #define SICSLOWPAN_CONF_FRAG 1 #define SICSLOWPAN_CONF_MAXAGE 3 #define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8 #elif 1 /* cx-mac radio cycling */ /* RF230 does clear-channel assessment in extended mode (autoretries>0) */ #define RF230_CONF_AUTORETRIES 1 #if RF230_CONF_AUTORETRIES #define NETSTACK_CONF_MAC nullmac_driver #else #define NETSTACK_CONF_MAC csma_driver #endif #define NETSTACK_CONF_RDC cxmac_driver #define NETSTACK_CONF_FRAMER framer_802154 #define NETSTACK_CONF_RADIO rf230_driver #define CHANNEL_802_15_4 26 #define RF230_CONF_AUTOACK 1 #define SICSLOWPAN_CONF_FRAG 1 #define SICSLOWPAN_CONF_MAXAGE 3 #define CXMAC_CONF_ANNOUNCEMENTS 0 #define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8 //Below gives 10% duty cycle, undef for default 5% //#define CXMAC_CONF_ON_TIME (RTIMER_ARCH_SECOND / 80) //Below gives 50% duty cycle //#define CXMAC_CONF_ON_TIME (RTIMER_ARCH_SECOND / 16) #else #error Network configuration not specified! #endif /* Network setup */ /* Logging adds 200 bytes to program size */ #define LOG_CONF_ENABLED 1 /* ************************************************************************** */ //#pragma mark RPL Settings /* ************************************************************************** */ #if UIP_CONF_IPV6_RPL /* Define MAX_*X_POWER to reduce tx power and ignore weak rx packets for testing a miniature multihop network. * Leave undefined for full power and sensitivity. * tx=0 (3dbm, default) to 15 (-17.2dbm) * RF230_CONF_AUTOACK sets the extended mode using the energy-detect register with rx=0 (-91dBm) to 84 (-7dBm) * else the rssi register is used having range 0 (91dBm) to 28 (-10dBm) * For simplicity RF230_MIN_RX_POWER is based on the energy-detect value and divided by 3 when autoack is not set. * On the RF230 a reduced rx power threshold will not prevent autoack if enabled and requested. * These numbers applied to both Raven and Jackdaw give a maximum communication distance of about 15 cm * and a 10 meter range to a full-sensitivity RF230 sniffer. #define RF230_MAX_TX_POWER 15 #define RF230_MIN_RX_POWER 30 */ #define UIP_CONF_ROUTER 1 #define UIP_CONF_ND6_SEND_RA 0 #define UIP_CONF_ND6_REACHABLE_TIME 600000 #define UIP_CONF_ND6_RETRANS_TIMER 10000 #undef UIP_CONF_UDP_CONNS #define UIP_CONF_UDP_CONNS 12 #undef UIP_CONF_FWCACHE_SIZE #define UIP_CONF_FWCACHE_SIZE 30 #define UIP_CONF_BROADCAST 1 #define UIP_ARCH_IPCHKSUM 1 #define UIP_CONF_PINGADDRCONF 0 #define UIP_CONF_LOGGING 0 #endif /* RPL */ #define CCIF #define CLIF /* include the project config */ /* PROJECT_CONF_H might be defined in the project Makefile */ #ifdef PROJECT_CONF_H #include PROJECT_CONF_H #endif /* PROJECT_CONF_H */ #endif /* __CONTIKI_CONF_H__ */