Hello-world =========== This adds the hello-world process in hello-world.c to the platform build, which prints "Hello-world" to stdout on startup. The entire platform is built, with uip stack, radio drivers, routing, etc. So it is not usually a simple build! The native platform is the default: make ./hello-world.native Starting Contiki Hello, world When switching between ipv4 and ipv6 builds on a platform, make TARGET= clean else the library for that platform will contain duplicate or unresolved modules. For example, using a loopback interface with the minimal-net platform: cd /examples/hello-world make TARGET=minimal-net ./hello-world.minimal-net Hello, world IP Address: 10.1.1.1 Subnet Mask: 255.0.0.0 Def. Router: 10.1.1.100 ^C make TARGET=minimal-net clean make UIP_CONF_IPV6=1 TARGET=minimal-net ./hello-world.minimal-net Hello, world IPV6 Address: [fd00::206:98ff:fe00:232] IPV6 Address: [fe80::206:98ff:fe00:232] ^C Note to AVR Raven users: Output goes to UART1, not the LCD. To see it, make TARGET=avr-raven hello-world.elf Load the .elf in AVR Studio and connect a hapsim terminal to the 1284p simulation.