/* * Copyright (c) 2006, Technical University of Munich * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * This file is part of the Contiki operating system. * * @(#)$$ */ #define DEBUG 0 #if DEBUG #define PRINTF(FORMAT,args...) printf_P(PSTR(FORMAT),##args) int pingtimer1=0,pingtimer2=0; #if RF230BB extern int rf230_interrupt_flag; #endif #else #define PRINTF(...) #endif #include #include #include #include #include //#include "lib/mmem.h" #include "loader/symbols-def.h" #include "loader/symtab.h" #ifdef RF230BB //radio driver using contiki core mac #include "radio/rf230bb/rf230bb.h" #include "net/mac/frame802154.h" #include "net/sicslowpan.h" #include "net/uip-netif.h" #include "net/mac/sicslowmac.h" #else //radio driver using Atmel/Cisco 802.15.4'ish MAC #include #include "mac.h" #include "sicslowmac.h" #include "sicslowpan.h" #include "ieee-15-4-manager.h" #endif /*RF230BB*/ #include "contiki.h" #include "contiki-net.h" #include "contiki-lib.h" #include "dev/rs232.h" #include "dev/serial-line.h" #include "dev/slip.h" #ifdef RAVEN_LCD_INTERFACE #include "raven-lcd.h" #endif #if WEBSERVER #include "httpd-fs.h" #endif #ifdef COFFEE_FILES #include "cfs/cfs.h" #include "cfs/cfs-coffee.h" #endif #if UIP_CONF_ROUTER #include "net/routing/rimeroute.h" #include "net/rime/rime-udp.h" #endif #include "net/rime.h" //#include "node-id.h" /*-------------------------------------------------------------------------*/ /*----------------------Configuration of the .elf file---------------------*/ typedef struct {unsigned char B2;unsigned char B1;unsigned char B0;} __signature_t; #define SIGNATURE __signature_t __signature __attribute__((section (".signature"))) SIGNATURE = { /* Older AVR-GCCs may not define the SIGNATURE_n bytes so use explicit 1284p values */ .B2 = 0x05,//SIGNATURE_2, .B1 = 0x97,//SIGNATURE_1, .B0 = 0x1E,//SIGNATURE_0, }; FUSES ={.low = 0xe2, .high = 0x99, .extended = 0xff,}; /* Put default MAC address in EEPROM */ #if WEBSERVER extern uint8_t mac_address[8]; //These are defined in httpd-fsdata.c via makefsdata.h extern uint8_t server_name[16]; extern uint8_t domain_name[30]; #else uint8_t mac_address[8] EEMEM = {0x02, 0x11, 0x22, 0xff, 0xfe, 0x33, 0x44, 0x55}; #endif /*-----------------------Initial contiki processes--------------------------*/ #ifdef RAVEN_LCD_INTERFACE #ifdef RF230BB PROCINIT(&etimer_process, &tcpip_process, &raven_lcd_process); #else PROCINIT(&etimer_process, &mac_process, &tcpip_process, &raven_lcd_process); #endif /*RF230BB*/ #else #ifdef RF230BB PROCINIT(&etimer_process, &tcpip_process); #elif WEBSERVER //TODO:get hello-world to compile with ipv6 PROCINIT(&etimer_process, &mac_process, &tcpip_process); #else PROCINIT(&etimer_process); #endif /*RF230BB*/ #endif /*RAVEN_LCD_INTERFACE*/ /*-------------------------Low level initialization------------------------*/ /*------Done in a subroutine to keep main routine stack usage small--------*/ void initialize(void) { //calibrate_rc_osc_32k(); //CO: Had to comment this out #ifdef RAVEN_LCD_INTERFACE /* First rs232 port for Raven 3290 port */ rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8); /* Set input handler for 3290 port */ rs232_set_input(0,raven_lcd_serial_input); #endif /* Second rs232 port for debugging */ rs232_init(RS232_PORT_1, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8); /* Redirect stdout to second port */ rs232_redirect_stdout(RS232_PORT_1); clock_init(); printf_P(PSTR("\n*******Booting %s*******\n"),CONTIKI_VERSION_STRING); /* Initialize process subsystem */ process_init(); #ifdef RF230BB { /* Start radio and radio receive process */ rf230_init(); sicslowpan_init(sicslowmac_init(&rf230_driver)); // ctimer_init(); // sicslowpan_init(lpp_init(&rf230_driver)); // rime_init(sicslowmac_driver.init(&rf230_driver)); // rime_init(lpp_init(&rf230_driver)); /* Set addresses BEFORE starting tcpip process */ rimeaddr_t addr; memset(&addr, 0, sizeof(rimeaddr_t)); AVR_ENTER_CRITICAL_REGION(); eeprom_read_block ((void *)&addr.u8, &mac_address, 8); AVR_LEAVE_CRITICAL_REGION(); memcpy(&uip_lladdr.addr, &addr.u8, 8); rf230_set_pan_addr(IEEE802154_PANID, 0, (uint8_t *)&addr.u8); rf230_set_channel(24); rimeaddr_set_node_addr(&addr); PRINTF("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]); // uip_ip6addr(&ipprefix, 0xaaaa, 0, 0, 0, 0, 0, 0, 0); // uip_netif_addr_add(&ipprefix, UIP_DEFAULT_PREFIX_LEN, 0, AUTOCONF); // uip_nd6_prefix_add(&ipprefix, UIP_DEFAULT_PREFIX_LEN, 0); // PRINTF("Prefix %x::/%u\n",ipprefix.u16[0],UIP_DEFAULT_PREFIX_LEN); #if UIP_CONF_ROUTER rime_init(rime_udp_init(NULL)); uip_router_register(&rimeroute); #endif PRINTF("Driver: %s, Channel: %u\n", sicslowmac_driver.name, rf230_get_channel()); } #endif /*RF230BB*/ /* Register initial processes */ procinit_init(); /* Autostart processes */ autostart_start(autostart_processes); //Give ourselves a prefix // init_net(); /*---If using coffee file system create initial web content if necessary---*/ #if COFFEE_FILES int fa = cfs_open( "/index.html", CFS_READ); if (fa<0) { //Make some default web content printf_P(PSTR("No index.html file found, creating upload.html!\n")); printf_P(PSTR("Formatting FLASH file system for coffee...")); cfs_coffee_format(); printf_P(PSTR("Done!\n")); fa = cfs_open( "/index.html", CFS_WRITE); int r = cfs_write(fa, &"It works!", 9); if (r<0) printf_P(PSTR("Can''t create /index.html!\n")); cfs_close(fa); // fa = cfs_open("upload.html"), CFW_WRITE); //
} #endif /*--------------------------Announce the configuration---------------------*/ #if WEBSERVER char buf[80]; unsigned int size; eeprom_read_block (buf,server_name, sizeof(server_name)); buf[sizeof(server_name)]=0; printf_P(PSTR("%s"),buf); eeprom_read_block (buf,domain_name, sizeof(domain_name)); buf[sizeof(domain_name)]=0; size=httpd_fs_get_size(); #ifndef COFFEE_FILES printf_P(PSTR(".%s online with fixed %u byte web content\n"),buf,size); #elif COFFEE_FILES==1 printf_P(PSTR(".%s online with static %u byte EEPROM file system\n"),buf,size); #elif COFFEE_FILES==2 printf_P(PSTR(".%s online with dynamic %u KB EEPROM file system\n"),buf,size>>10); #elif COFFEE_FILES==3 printf_P(PSTR(".%s online with static %u byte program memory file system\n"),buf,size); #elif COFFEE_FILES==4 printf_P(PSTR(".%s online with dynamic %u KB program memory file system\n"),buf,size>>10); #endif #else printf_P(PSTR("Online\n")); #endif /* WEBSERVER */ } /*-------------------------------------------------------------------------*/ /*------------------------- Main Scheduler loop----------------------------*/ /*-------------------------------------------------------------------------*/ int main(void) { initialize(); while(1) { process_run(); #if DEBUG if (rf230_interrupt_flag) { if (rf230_interrupt_flag!=11) { PRINTF("*****Radio interrupt %u\n",rf230_interrupt_flag); rf230_interrupt_flag=0; } } #endif #if PINGS if (pingtimer1++==10000) { pingtimer1=0; if (pingtimer2++==1000) { PRINTF("-------Ping\n"); pingtimer2=0; raven_ping6(); } } #endif } return 0; }