This directory contains the contiki driver for the sensor (potentiometer) available on the NXP DR1199 board. This board is part of the NXP JN516x Evaluation Kit (see http://www.nxp.com/documents/leaflet/75017368.pdf). The driver for the switches on the DR1199 are supported by `dev/dr1174` when compiled with the flag `SENSOR_BOARD_DR1199` set. The dr1199 sensor code interfaces to contiki `core/lib/sensors.c` framework. The code is specificaly for the JN516X platform, because it makes use of the platform\DK4 libraries of this JN516X SDK. `examples/jn516x/rpl/coap-dr1199-node.c` shows an example on using this contiki driver. leds-arch.c implements the led driver for leds D3 and D6 on the DR1174 base-board and the DR1199 board. Mapping of LEDs on JN516x DR1199/DR1174: leds.h: led on DR1174: DR1174+DR1199: leds.h physical leds LEDS_GREEN LED D1 on DR1199 LEDS_BLUE LED D2 on DR1199 LEDS_RED LED D3 on DR1199 LEDS_GP0 LED D3 on DR1174 LEDS_GP1 LED D6 on DR1174 Note: LEDS_GPx definitions included in leds.h via platform-conf.h