/* * Copyright (c) 2010, Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ /** * \file * A brief description of what this file is * \author * Joakim Eriksson */ #ifndef PLATFORM_CONF_H_ #define PLATFORM_CONF_H_ /* * Definitions below are dictated by the hardware and not really * changeable */ #ifndef WITH_LCD #define WITH_LCD 0 #endif /* 0 */ /* CPU target speed in Hz */ #define F_CPU 8000000uL // 8MHz by default /* Our clock resolution, this is the same as Unix HZ. */ #define CLOCK_CONF_SECOND 128UL #define BAUD2UBR(baud) ((F_CPU/baud)) #define CCIF #define CLIF #define HAVE_STDINT_H #define MSP430_MEMCPY_WORKAROUND 1 #include "msp430def.h" /* Types for clocks and uip_stats */ typedef unsigned short uip_stats_t; typedef unsigned long clock_time_t; typedef unsigned long off_t; /* the low-level radio driver */ #define NETSTACK_CONF_RADIO cc2420_driver /* * Definitions below are dictated by the hardware and not really * changeable! */ /* DCO speed resynchronization for more robust UART, etc. */ /* Not needed from MSP430x5xx since it make use of the FLL */ #define DCOSYNCH_CONF_ENABLED 0 #define DCOSYNCH_CONF_PERIOD 30 #define ROM_ERASE_UNIT_SIZE 512 #define XMEM_ERASE_UNIT_SIZE (64*1024L) #define CFS_CONF_OFFSET_TYPE long /* Use the first 64k of external flash for node configuration */ #define NODE_ID_XMEM_OFFSET (0 * XMEM_ERASE_UNIT_SIZE) /* Use the second 64k of external flash for codeprop. */ #define EEPROMFS_ADDR_CODEPROP (1 * XMEM_ERASE_UNIT_SIZE) #define CFS_XMEM_CONF_OFFSET (2 * XMEM_ERASE_UNIT_SIZE) #define CFS_XMEM_CONF_SIZE (1 * XMEM_ERASE_UNIT_SIZE) #define CFS_RAM_CONF_SIZE 4096 /* * SPI bus configuration for the TMote Sky. */ /* SPI input/output registers. */ #define SPI_TXBUF UCB0TXBUF #define SPI_RXBUF UCB0RXBUF /* USART0 Tx ready? */ #define SPI_WAITFOREOTx() while ((UCB0STAT & UCBUSY) != 0) /* USART0 Rx ready? */ #define SPI_WAITFOREORx() while ((UCB0IFG & UCRXIFG) == 0) /* USART0 Tx buffer ready? */ #define SPI_WAITFORTxREADY() while ((UCB0IFG & UCTXIFG) == 0) #define MOSI 1 /* P3.1 - Output: SPI Master out - slave in (MOSI) */ #define MISO 2 /* P3.2 - Input: SPI Master in - slave out (MISO) */ #define SCK 3 /* P3.3 - Output: SPI Serial Clock (SCLK) */ /* * SPI bus - M25P80 external flash configuration. */ //#define FLASH_PWR 3 /* P4.3 Output */ ALWAYS POWERED ON Z1 #define FLASH_CS 4 /* P4.4 Output */ #define FLASH_HOLD 7 /* P5.7 Output */ /* Enable/disable flash access to the SPI bus (active low). */ #define SPI_FLASH_ENABLE() ( P4OUT &= ~BV(FLASH_CS) ) #define SPI_FLASH_DISABLE() ( P4OUT |= BV(FLASH_CS) ) #define SPI_FLASH_HOLD() ( P5OUT &= ~BV(FLASH_HOLD) ) #define SPI_FLASH_UNHOLD() ( P5OUT |= BV(FLASH_HOLD) ) /* * SPI bus - CC2420 pin configuration. */ #define CC2420_CONF_SYMBOL_LOOP_COUNT 1302 /* 326us msp430X @ 8MHz */ /* P1.2 - Input: FIFOP from CC2420 */ #define CC2420_FIFOP_PORT(type) P1##type #define CC2420_FIFOP_PIN 6 /* P1.3 - Input: FIFO from CC2420 */ #define CC2420_FIFO_PORT(type) P1##type #define CC2420_FIFO_PIN 5 /* P1.4 - Input: CCA from CC2420 */ #define CC2420_CCA_PORT(type) P1##type #define CC2420_CCA_PIN 7 /* P4.1 - Input: SFD from CC2420 */ #define CC2420_SFD_PORT(type) P1##type #define CC2420_SFD_PIN 3 /* P3.0 - Output: SPI Chip Select (CS_N) */ #define CC2420_CSN_PORT(type) P3##type #define CC2420_CSN_PIN 0 /* P4.5 - Output: VREG_EN to CC2420 */ #define CC2420_VREG_PORT(type) P1##type #define CC2420_VREG_PIN 4 /* P4.6 - Output: RESET_N to CC2420 */ #define CC2420_RESET_PORT(type) P1##type #define CC2420_RESET_PIN 2 #define CC2420_IRQ_VECTOR PORT1_VECTOR /* Pin status. */ #define CC2420_FIFOP_IS_1 (!!(CC2420_FIFOP_PORT(IN) & BV(CC2420_FIFOP_PIN))) #define CC2420_FIFO_IS_1 (!!(CC2420_FIFO_PORT(IN) & BV(CC2420_FIFO_PIN))) #define CC2420_CCA_IS_1 (!!(CC2420_CCA_PORT(IN) & BV(CC2420_CCA_PIN))) #define CC2420_SFD_IS_1 (!!(CC2420_SFD_PORT(IN) & BV(CC2420_SFD_PIN))) /* The CC2420 reset pin. */ #define SET_RESET_INACTIVE() (CC2420_RESET_PORT(OUT) |= BV(CC2420_RESET_PIN)) #define SET_RESET_ACTIVE() (CC2420_RESET_PORT(OUT) &= ~BV(CC2420_RESET_PIN)) /* CC2420 voltage regulator enable pin. */ #define SET_VREG_ACTIVE() (CC2420_VREG_PORT(OUT) |= BV(CC2420_VREG_PIN)) #define SET_VREG_INACTIVE() (CC2420_VREG_PORT(OUT) &= ~BV(CC2420_VREG_PIN)) /* CC2420 rising edge trigger for external interrupt (FIFOP). */ #define CC2420_FIFOP_INT_INIT() do { \ CC2420_FIFOP_PORT(IES) &= ~BV(CC2420_FIFOP_PIN); \ CC2420_CLEAR_FIFOP_INT(); \ } while(0) /* FIFOP on external interrupt 0. */ #define CC2420_ENABLE_FIFOP_INT() do {CC2420_FIFOP_PORT(IE) |= BV(CC2420_FIFOP_PIN);} while(0) #define CC2420_DISABLE_FIFOP_INT() do {CC2420_FIFOP_PORT(IE) &= ~BV(CC2420_FIFOP_PIN);} while(0) #define CC2420_CLEAR_FIFOP_INT() do {CC2420_FIFOP_PORT(IFG) &= ~BV(CC2420_FIFOP_PIN);} while(0) /* * Enables/disables CC2420 access to the SPI bus (not the bus). * (Chip Select) */ /* ENABLE CSn (active low) */ #define CC2420_SPI_ENABLE() (CC2420_CSN_PORT(OUT) &= ~BV(CC2420_CSN_PIN)) /* DISABLE CSn (active low) */ #define CC2420_SPI_DISABLE() (CC2420_CSN_PORT(OUT) |= BV(CC2420_CSN_PIN)) #define CC2420_SPI_IS_ENABLED() ((CC2420_CSN_PORT(OUT) & BV(CC2420_CSN_PIN)) != BV(CC2420_CSN_PIN)) #endif /* PLATFORM_CONF_H_ */