oliverschmidt
2632f8f937
Removed finally unnecessary cast.
2008-02-10 22:36:36 +00:00
nvt-se
f0891be218
added clear channel assessment timeout. long to begin with.
2007-12-20 14:44:31 +00:00
fros4943
d8f6f03edc
moving radio init to init-net files
2007-12-20 13:43:24 +00:00
fros4943
d0997c2dab
major bugfix: padding synch with zero
2007-12-20 13:36:59 +00:00
nvt-se
abb2731ed7
corrected comparison when bits don't need shifting.
2007-12-20 10:48:01 +00:00
nvt-se
7a6a9e62e4
improved logic.
2007-12-19 13:25:41 +00:00
nvt-se
1f00c20815
state variable must be volatile.
2007-12-19 13:09:01 +00:00
nvt-se
b4a8641dda
removed printf's.
2007-12-18 15:27:43 +00:00
nvt-se
f9d24f0d24
Wake up from sleep in the interrupt when the receiver process is going
...
to be polled.
2007-12-18 15:26:25 +00:00
fros4943
d21572da02
configurable port
2007-12-18 11:55:01 +00:00
nvt-se
ab115e4b10
Removed deprecated function.
2007-12-17 20:18:29 +00:00
nvt-se
1566f55e04
use smaller payload buffer size and provision for synchronization word in
...
the total buffer.
2007-12-17 20:15:53 +00:00
nvt-se
bcefffb0e7
set ev to valid value.
2007-12-17 18:48:50 +00:00
nvt-se
004143b6b8
set rxlen to zero before enabling interrupts.
2007-12-17 16:37:15 +00:00
nvt-se
2288cdecbb
small cleanup.
2007-12-17 16:23:32 +00:00
nvt-se
2d5f331b34
new line.
2007-12-17 16:20:34 +00:00
fros4943
479d74ce6a
added receiver process outside interrupt
2007-12-17 15:53:57 +00:00
fros4943
7886d51045
removed old dma_init
2007-12-17 15:47:55 +00:00
fros4943
3936e0c275
updated version
2007-12-17 15:47:40 +00:00
nvt-se
5f1ca4ccdf
use synchronous transmission.
2007-12-17 15:26:47 +00:00
nvt-se
2a0351afb4
improved uip support and cleaned up the source.
2007-12-17 13:33:09 +00:00
nvt-se
86ce511469
Separate files for network initialization.
2007-12-17 13:20:54 +00:00
fros4943
4da695ce72
bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise
2007-12-17 11:23:57 +00:00
nvt-se
6a42706847
removed duplicate.
2007-12-17 11:15:21 +00:00
nvt-se
a305e3ccbb
removed lpm_on.
2007-12-17 11:14:28 +00:00
fros4943
3969ea6f9d
not using usb port to program the msb
2007-12-17 11:10:45 +00:00
nvt-se
54bef4bea3
added back initializations that were missing in the previous commit.
2007-12-13 13:10:02 +00:00
nvt-se
665c58fd2a
Contributions from Michael Baar:
...
CC1020
o Turns off only after transmission has ended and not in between
o Using events for DMA takes too long. It should use a callback when
DMA finishes to turn off the transmit mode as early as possible.
Core/UART
o Added profiling and energest initialization
o Changed low-power mode from LPM1 to LPM3
2007-12-13 12:51:38 +00:00
nvt-se
b1d87bf0d3
Removed deprecated rules.
2007-12-13 11:29:12 +00:00
nvt-se
486ea95b4f
Limited support for energy estimation.
2007-12-10 12:49:08 +00:00
nvt-se
46b6ce9193
Conform to the radio_driver interface.
2007-11-18 12:25:22 +00:00
nvt-se
c90a758ac5
Detect if the medium is busy right before sending.
2007-11-12 21:17:47 +00:00
nvt-se
0e4429068b
Added a carrier sensing function.
2007-11-07 15:34:41 +00:00
nvt-se
ee59f1fe34
Use a fresh RSSI value in the read function.
2007-11-07 15:26:00 +00:00
nvt-se
a604013a88
Added more flags for the status register.
2007-11-07 15:23:35 +00:00
nvt-se
366d845336
DMA destination is now given as a parameter instead of being hardwired.
2007-11-06 15:08:55 +00:00
nvt-se
dc8b6e7dcd
Removed some unused headers and definitions.
2007-11-06 14:48:18 +00:00
nvt-se
882f340f17
Use a counter for the test so lost packets are spotted easily.
2007-11-06 14:44:42 +00:00
nvt-se
e7dc3ec422
Initialize ctimer.
2007-10-24 13:47:50 +00:00
nvt-se
e57310c0b3
Removed duplicated statement.
2007-10-22 13:07:00 +00:00
nvt-se
06f923e502
Simple test for the SHT11 driver.
2007-10-22 13:05:30 +00:00
nvt-se
91b79de654
Use sht11 driver.
2007-10-22 12:21:20 +00:00
nvt-se
045225fa05
Made driver less platform-dependent and added support for msb-430.
2007-10-22 12:19:58 +00:00
nvt-se
2d0225b0e4
Safeguard for invalid packets.
2007-10-04 10:02:08 +00:00
nvt-se
fb9b800c53
More clear power down procedure. Now it is required that cc1020_on
...
is called before anyone can send after the power down.
2007-10-02 14:05:45 +00:00
nvt-se
4e8bdb1c08
Power managment is handled by another layer.
2007-10-01 11:59:36 +00:00
nvt-se
c0686e80f1
Added definitions for the MAIN register.
2007-10-01 11:56:49 +00:00
nvt-se
b72c228379
* Enable rtimers.
...
* Specify port direction first.
2007-09-21 14:53:36 +00:00
nvt-se
24ffa8cfaf
support third DMA line.
2007-09-21 13:51:09 +00:00
nvt-se
bbecdd9c34
removed uncommented line.
2007-09-14 19:27:22 +00:00
