Commit graph

1287 commits

Author SHA1 Message Date
nifi 24f28f0f1c Updated to match the new sensors API 2010-01-14 17:39:35 +00:00
joxe 071a9eaa6b adapted for new sensor APIs 2010-01-14 16:13:45 +00:00
nifi e0c0808767 removed obsolete file 2010-01-14 15:55:15 +00:00
joxe 3c0dcb45c7 fixed for updated sensors API 2010-01-14 15:50:13 +00:00
adamdunkels fe126bc90e Updated to match the new sensors API 2010-01-14 15:38:56 +00:00
nifi 4d03a30456 removed obsolete file (available in core/dev) 2010-01-14 14:00:45 +00:00
joxe 31ea888b75 fixed Sky platform for new sensor APIs 2010-01-14 14:00:38 +00:00
joxe 4a3953204f changed sky sensors to new api 2010-01-14 13:53:06 +00:00
matsutsuka 23d5f84a46 Workaround for compiling some examples available 2009-12-16 06:47:17 +00:00
matsutsuka a628b0c581 minor aesthetic modification 2009-12-11 15:00:38 +00:00
matsutsuka 1586b3b5c4 fixed minor bug of mt-test due to sdcc 2009-12-11 14:59:45 +00:00
matsutsuka ebe74fed56 size-optimization option and peep-hole optimizer have been introduced.
object files have been moved to binary directory
2009-12-11 14:59:31 +00:00
adamdunkels e3fed27f4a Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files 2009-12-05 19:42:56 +00:00
nifi 3c1a7f3bc7 * Added configuration for radio receive buffer size (default Rime packet size)
* Added configuration for beep on bad crc
* Changed to drop packet if read buffer is too small rather than truncating data
* Turn off energest-listen during transmission
2009-11-19 18:04:02 +00:00
nifi c89028a11f reduced serial line buffer size 2009-11-18 15:34:57 +00:00
nifi bb0ffe0478 moved rime initialization into rime router so it is easier to switch IPv6 routing module 2009-11-18 13:51:55 +00:00
nvt-se 7a9e9c72a1 switched to new radio return values 2009-11-13 12:38:14 +00:00
nvt-se b909a62265 Reduced application buffer size for SD and switched parameter in cfs-coffee-arch.c 2009-11-11 14:59:33 +00:00
nvt-se 8c040be133 Changed the name of the declaration of the default block size. Reduced the OCR reading timeout. 2009-11-07 01:05:23 +00:00
nvt-se 7aac2d90fb specify that energest.h is in the sys directory. 2009-11-06 17:18:47 +00:00
nvt-se 31850d2e29 wait for RX before reading, and ensure that the byte is read out by using a volatile dummy variable 2009-11-06 15:40:15 +00:00
nvt-se 731e1da844 increase the I/O rate and use etimer_restart to maintain a uniform wait time between iterations 2009-11-06 15:11:52 +00:00
nvt-se f59e89cfb9 Fixed the problem of reads from the SPI where the first byte was sometimes lost.The SPI read function now only generates an idle symbol if there is not a byte
already in the reception buffer.
2009-11-06 14:02:59 +00:00
nvt-se 84f2a077de the return value should be checked against the size of sd_buf instead of buf 2009-11-03 16:18:37 +00:00
nvt-se 9b4cd05e1f Patch from David Gustafsson: break out SPI functions and fix bug in capacity
calculation.

Removed expensive modulo operations from sd_read and sd_write because the block size is now a variable. (nvt)
2009-11-03 15:21:43 +00:00
adamdunkels d3131e1811 Print link-local IPv6 address when booting the node 2009-10-29 22:10:59 +00:00
adamdunkels f03caa357e Allow reprogramming invidual nodes with 'make file.upload MOTE=x' where x is the mote number just like with make login 2009-10-29 22:10:21 +00:00
nifi 831f16cf61 Fixed COOJA quickstart to run COOJA from current directory 2009-10-28 13:39:15 +00:00
fros4943 99a540fd0d macro renamed to SPI_IS_ENABLED() to avoid confusions 2009-10-27 15:33:24 +00:00
fros4943 6b36cd9de9 added macro for checking whether SPI is ENABLED 2009-10-27 15:25:02 +00:00
nvt-se 4a0973a95f specify the number of queuebufs that we want to use in the MSB430 platform by default 2009-10-26 16:11:24 +00:00
kasunch ca6c8818b1 Two comment fixes 2009-10-22 15:48:20 +00:00
nifi 178548413e added option to specify JTAG port for programming 2009-10-22 09:27:46 +00:00
adamdunkels 29e8dae88c Added X-MAC support for IPv6/SICSlowpan nodes, added 802.15.4 default framing to X-MAC 2009-10-19 20:55:52 +00:00
fros4943 bf1920386a increased log buffer size with uIP SLIP 2009-10-19 18:00:49 +00:00
oliverschmidt caaa790add cc65 2.13. comes with secondary linker configs. The 'apple2enh-reboot.cfg' is more or less what was previously engineered as part of Contiki for the Apple2 - now moved into the cc65 distro. 2009-10-18 10:06:44 +00:00
oliverschmidt 18933cc0c3 cc65 2.13. comes with builtin linker configs defining the __STACKSIZE__ symbol as weak. This allows to override the stacksize from the linker command line thus eliminating the need for linker configs maintained by Contiki. 2009-10-18 09:58:21 +00:00
oliverschmidt d8aee18f6c cc65 2.13. allows to
- explicitly set 80 column mode
- control exit behaviour from the program itself (instead of requiring a loader variant).
2009-10-18 09:37:37 +00:00
oliverschmidt d30ccbe81d cc65 2.13. allows to explicitly set 80 column mode. 2009-10-18 09:35:07 +00:00
oliverschmidt 31eb62821f cc65 2.13. features a default-per-target mouse driver so there's no need to deal with their names in Contiki anymore. 2009-10-18 09:33:08 +00:00
adamdunkels 79d7c366a3 Rime polite announcements should be used when IPv6 is enabled, and not used otherwise 2009-10-18 07:15:33 +00:00
nvt-se ed4ee1b5af continue the test by resetting the etimer even if sd_write returns an error. 2009-10-01 16:40:25 +00:00
nvt-se 3e41c7d564 removed the immaterial sd_get_block_size function. 2009-09-24 12:09:26 +00:00
kasunch 1ee52635c8 1. Changed fuse bits to preserve EEPROM through the chip erase when uploading a new OS image.
2. Added a new make rule to erase EEPROM through the chip erase.
2009-09-24 07:09:31 +00:00
kasunch 71b5872045 Added node id restoring at the boot-up. 2009-09-24 06:53:35 +00:00
kasunch 5e1db8b6fa Added node id restoring and burning functions. 2009-09-24 06:51:22 +00:00
kasunch f617b77b87 Added the EEPROM starting address of node id. 2009-09-24 06:45:48 +00:00
nvt-se fc34a4572b Removed the deprecated COFFEE_DIR_CACHE_ENTRIES parameter. 2009-09-22 16:31:36 +00:00
nvt-se 3b205a8912 removed compiler warning about missing declaration. 2009-09-22 16:27:17 +00:00
nvt-se 19d697fd37 use megabyte unit for printing SD card capacity. 2009-09-22 16:24:03 +00:00
nvt-se aef32d8144 moved synchronization word definition to the right place.
removed memcpy call for a two byte copy. also led to a relocation error
in some versions of the mspgcc linker.
2009-09-22 16:20:39 +00:00
nvt-se ce32792812 define U1IFG if it is missing. 2009-09-22 16:04:03 +00:00
nvt-se f698ce2577 Adapted the simple SD test to the new driver and its interface. 2009-09-22 15:37:18 +00:00
nvt-se 12c6dbb7c6 switched to emulated random I/O functions in the SD driver 2009-09-22 15:36:33 +00:00
nvt-se 1fb5841454 introduced WITH_SD parameter. added missing variable. 2009-09-22 15:35:45 +00:00
nvt-se ea56edc5c2 added a simple driver for using SD devices through the SPI. 2009-09-22 15:20:51 +00:00
nifi a71cd04144 reconfigured coffee to use larger sectors and no micrologs, changed the architecture specific erase function accordingly 2009-09-21 14:16:32 +00:00
nvt-se 4fd4cb1238 Architecture-dependent Coffee functions for SD cards. 2009-09-17 14:37:32 +00:00
nvt-se 20f449c3e8 micro logs are not needed in SD memory. 2009-09-17 14:19:06 +00:00
nvt-se 519532183f do not enable Coffee until the new SD driver is in place. 2009-09-17 13:28:41 +00:00
nvt-se 84b0ec7798 Removed unstable SD driver (to be replaced.) 2009-09-17 13:24:49 +00:00
kasunch 4319e8b82e 1. Add MAC address displaying during the booting.
2. Set LEDs to turn on at different stages of the booting process.
2009-09-13 21:42:43 +00:00
kasunch 7444c41da9 Adding device driver files for the Dallas Semiconductor DS2401 chip to the CONTIKI_TARGET_SOURCEFILES list. 2009-09-13 21:28:48 +00:00
kasunch e2224a8384 Device driver for the Dallas Semiconductor DS2401 chip. 2009-09-13 21:21:16 +00:00
oliverschmidt 392c3aa2b6 Updated URL from Loader 1.3 to Loader 1.4. 2009-09-13 19:59:34 +00:00
oliverschmidt daf29d0a87 Supply prototype even if there's no implementation (yet) to keep compiler happy. 2009-09-13 19:07:34 +00:00
zdshelby ec02eab6bc - Upgraded the Sensinode platform to use sicslowmac.c
- Improved the rime address setup, setting the RF driver addresses (byte order may not be correct)
2009-09-11 08:03:42 +00:00
adamdunkels bddd31abf2 Fixed compiler warnings 2009-09-09 21:06:51 +00:00
zdshelby c4ae18e37b Initial commit of Sensinode platform files. 2009-09-08 20:06:28 +00:00
zhitao bdce08d39d augmented CFS compliance for a RAM-based, one-file-only file system in Cooja. 2009-09-08 15:08:20 +00:00
kasunch 1bede62d2a Initial files of the MICAz port. 2009-09-08 08:59:29 +00:00
joxe ae8bd7a7b6 added inclusion of radio Makefile for the raven platforms 2009-09-07 12:06:33 +00:00
nifi d4b619bcc5 Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430 2009-09-07 11:31:26 +00:00
nvt-se 9d7bdad864 use CLOCK_CONF_SECOND. 2009-09-04 13:59:37 +00:00
nvt-se fed4a58102 return the amount of seconds elapsed in clock_seconds() 2009-09-04 13:57:17 +00:00
nvt-se cd96248306 only turn off if we are not in CC1020_OFF state. (patch by Jesper Karlsson) 2009-09-04 11:00:48 +00:00
nvt-se a21dece53f removed unused state codes and unused printf statements 2009-09-03 12:57:57 +00:00
nifi 3a8ee769cb Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown. 2009-08-31 12:06:34 +00:00
nvt-se ebd91b9f9d Removed deprecated dir cache macro. 2009-08-30 20:36:32 +00:00
adamdunkels b71faae330 ext-sensor: new driver for external sensors (e.g. Phidgets) on the Sentilla JCreate, developed by Marcus Lunden 2009-08-25 16:24:49 +00:00
nifi e41de15c85 use nodeid 0 if no nodeid has been set 2009-08-24 15:44:45 +00:00
nvt-se 5e0d762e79 Call BIC_SR_IRQ to properly go switch of IRQ mode in the saved flag in the stack. 2009-08-17 11:32:17 +00:00
oliverschmidt f606253f58 Minor adjustment to predominant coding style. 2009-08-09 20:51:19 +00:00
dak664 d5047f43c1 Change ip4 addresses to agree with wiki 2009-08-08 11:42:05 +00:00
dak664 283d288f1a Allow hello-world to build, fix makefile ignoring rf230bb 2009-07-26 12:10:38 +00:00
dak664 8ea4b747d0 Add httpd_s* function layer and HTTPD_STRING_ATTR for strings in different memory types 2009-07-24 15:41:52 +00:00
dak664 a41efba6b4 Add makefsdata.h, remove httpd-fsdata.c, make now creates with /tools/ makefsdata. 2009-07-23 17:43:51 +00:00
dak664 928bbc206a Add static coffee file system to webserver 2009-07-23 16:16:07 +00:00
dak664 c1b7375a5a *** empty log message *** 2009-07-23 16:13:48 +00:00
nvt-se 34a6fc82a3 Backup all the infomem before erasing the segment. Thanks to Frederik Hermans for reporting this. 2009-07-21 16:56:33 +00:00
dak664 af981496b1 Optional complemented writes/reads and faster word reads 2009-07-15 22:10:08 +00:00
dak664 8e3c2e6334 Passed tests on Raven 1284p in 3 seconds with 56KB program memory disk 2009-07-14 19:23:22 +00:00
nvt-se b0431cc688 removed obsolete offset type definitions. 2009-07-13 20:02:16 +00:00
ksb 292e69a468 Missing file 2009-07-11 15:23:24 +00:00
ksb 3c3714c178 Use IP over Rime 2009-07-11 15:07:59 +00:00
ksb 88669e1675 Test application for USB mass storage 2009-07-11 14:53:02 +00:00
matsutsuka 2aa41337bc followed the name change of serial-line.c 2009-07-09 18:28:20 +00:00
matsutsuka 9a752dab15 aligned the usage of LOADER_UNLOAD macro with other sources 2009-07-09 18:24:56 +00:00
dak664 49989dbe45 Add rf230bb radio driver with conditional make on RF230BB=1 2009-07-08 15:26:17 +00:00
nifi c436b99887 added configuration of MAC driver
added missing initialization of serial-line
added periodic DCO/CPU speed re-synch
2009-07-07 13:06:56 +00:00
nvt-se 1e0ca9ceac Made the use of micro logs configurable to make file modifications
more efficient on storage types that support inline updates.

The sky platform uses logs, and the native platform uses no logs.
2009-06-29 13:30:16 +00:00
nvt-se 828439c922 code style compliancy 2009-06-29 12:46:49 +00:00
nifi 05d4bc4532 allow UIP_CONF_ROUTER to be set as compilation flag 2009-06-29 09:54:39 +00:00
joxe 1cc33ac451 configured routing to off for sky-IPv6 2009-06-26 12:01:23 +00:00
joxe e16d4b0f06 fixed IPV6 flags for sky 2009-06-26 12:00:49 +00:00
nvt-se b912a41ea3 use polite announcements when running Rime over UDP. 2009-06-24 16:44:26 +00:00
nifi 912aba7280 added init function in MAC driver for easier configuration 2009-06-22 11:14:11 +00:00
dak664 17da57e989 All static strings to flash, add wildcard to file-stats cgi 2009-06-19 17:11:28 +00:00
dak664 6c30271ade Fix html compliance, use wildcard in file-stats cgi 2009-06-19 17:09:51 +00:00
nifi 16a9656abd Bugfix: output function was not called with latest version of tcpip. Identified by Pierre de Vos. 2009-06-01 15:13:30 +00:00
nvt-se a7faaa9aaa a bit more documentation. 2009-05-26 14:34:22 +00:00
fros4943 300f3396ac allow contiki motes to handle several contiki events each tick + corrected variables types 2009-05-26 14:08:51 +00:00
nvt-se cd00bd3fdc switched to calm mode as default. 2009-05-26 13:23:59 +00:00
nvt-se 06a2fc40ec switched to 32-bit iteration variable for long-running tests. 2009-05-26 13:03:44 +00:00
nvt-se 0f6954cc43 added test options for stressing the card and for switching blocks randomly. 2009-05-26 13:00:37 +00:00
nvt-se 28619eabc0 bug fix with sdspi select.
code style fixes.
2009-05-26 13:00:07 +00:00
nvt-se e9d279620f more protection against interrupts that might spoil SPI sequences.
made coding style more like that of contiki.
2009-05-26 12:15:46 +00:00
nvt-se 09a1c115fe initial test port of Coffee for the MSB-430 platform. 2009-05-25 14:14:32 +00:00
nvt-se 8f7f7fb896 enabled random I/O in the SD driver. 2009-05-25 14:13:47 +00:00
nvt-se da91d87ae6 switch of interrupts while writing and reading to the SPI. avoids
desynchronization problems.
2009-05-25 13:19:04 +00:00
fros4943 faec70dee0 test app update: print sensor type 2009-05-19 17:54:08 +00:00
fros4943 d54176205c decreased default elfloader memory usage for sky platform 2009-05-18 10:32:56 +00:00
nvt-se bcc5084564 removed delay because while loop waits until completion anyway. 2009-05-15 13:54:08 +00:00
nvt-se f9b35795c7 minor refactoring. 2009-05-14 12:18:49 +00:00
adamdunkels bc6c9410cc Print out the gateway's IP address more prominently 2009-05-12 17:32:49 +00:00
adamdunkels 00890caca8 Make sure that symbols.c is included in every native cpu build, not just the native target 2009-05-12 17:23:23 +00:00
nvt-se 74e9bc8789 Added flash reads and writes to energest. 2009-05-11 15:26:24 +00:00
adamdunkels 900480959b Increased the default number of queue buffers: there usually is plenty of RAM left, so we should be able to afford it 2009-05-10 21:15:16 +00:00
joxe 6a7bc4c3a5 added mcu-chip temperature to accelerometer sensor - value 3 2009-05-08 16:03:50 +00:00
adamdunkels 6fcca2d545 Initialize ctimer, add IPv6 address configuration for the aaaa prefix 2009-04-29 11:49:27 +00:00
adamdunkels e6215712ca When a node is configured as an IP gateway, we switch off the power-saving MAC protocolto improve performance and to avoid problems with the serial communication that X-MACs use of rtimers can cause 2009-04-29 11:46:20 +00:00
adamdunkels 064f4488d4 Increase default CPU speed from 2.4576 MHz to 3.9 MHz. Communication works better, at a low power cost 2009-04-29 11:43:48 +00:00
adamdunkels bbab7ba55c When the tmote-bsl binary is found, program only one mote at once (parallel programming with tmote-bsl doesn't seem to work) 2009-04-29 11:42:56 +00:00
fros4943 9f299c277e added experimental slip support for contiki motes 2009-04-23 09:15:51 +00:00
fros4943 9bd3d07510 implemented slip_arch_writeb() function 2009-04-23 09:02:06 +00:00
fros4943 b65014d1be bugfix by Wolf-Bastian Pttner: check buffer size at incoming radio data 2009-04-16 14:38:41 +00:00
fros4943 bc6704079c cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization 2009-04-16 14:34:51 +00:00
adamdunkels 2e37fca49f Check for tmote-bsl-linux binary under linux, and use it is available 2009-04-10 07:43:29 +00:00
adamdunkels 2545fd9069 Hack to make DS2411 ID useable as an Ethernet MAC address (remove multicast bit) 2009-04-10 00:40:08 +00:00
adamdunkels 3415ff26bd Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS 2009-04-10 00:39:19 +00:00
nvt-se 172ffb74c7 fix compiler warnings. patch from Jesper Karlsson. 2009-04-08 14:56:00 +00:00
nifi b41b79e3a9 Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets). 2009-04-06 17:18:20 +00:00
nifi 900d8d8e17 changed to use HC01 compression for uip6 2009-04-06 16:01:11 +00:00
nifi 8b41f3a6a8 set rime addr size to 8 for uip6, restored clock resolution 2009-04-06 14:59:49 +00:00
nifi 76b7bf43d0 added setup for uip6 with 802.15.4 frames and routing using Rime 2009-04-06 14:12:58 +00:00
nifi a36e529df1 added configuration for panid 2009-04-06 13:31:00 +00:00
nvt-se f53560f6a5 enabled multihop routing, increased uip buffer size. 2009-04-06 13:23:14 +00:00
nifi c1d490b6a7 added workaround for memcpy/memset bug in mspgcc 2009-04-06 13:07:37 +00:00
adamdunkels 58331e6802 Made tick resultion more fine-grained to support a shorter LPP listen time 2009-04-03 11:46:48 +00:00
fros4943 b730fb329d changed upload rules due to problems on linux platforms 2009-04-02 11:15:30 +00:00
fros4943 3b3580e439 disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki 2009-04-01 18:11:48 +00:00
fros4943 aa736322e1 removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead 2009-04-01 17:17:55 +00:00
fros4943 3665422d8d simplified cooja communication stacks initialization + added uipv6 stack 2009-04-01 13:50:12 +00:00
fros4943 6a99a82516 copied uipv6 configuration from native platform 2009-04-01 13:46:56 +00:00
fros4943 1c031504e5 no need to initialize serial line 2009-04-01 13:46:16 +00:00
fros4943 892bfb5678 moved radio-uip link functionality directly to comm stack sources 2009-04-01 13:45:41 +00:00
fros4943 eddd8350c5 renamed radio driver 2009-04-01 13:44:34 +00:00
fros4943 afed9bb2d0 icnlude packet radio by default 2009-04-01 13:39:54 +00:00
nifi c6b15c289e * show radio channel at startup
* only initialize timesynch when timesynch is enabled
2009-03-31 13:25:50 +00:00
nvt-se e90149b7b4 avoid switching mode when tx or rx is active.
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
2009-03-30 14:07:34 +00:00
fros4943 5f1fda0406 removed unused variables + writing serial data in timeevent 2009-03-26 16:23:47 +00:00
fros4943 dda6de8438 + clock stub functions 2009-03-26 16:22:36 +00:00
fros4943 ac22ad5081 changed the Makefile rules for uploading to sky-nodes.
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
2009-03-26 13:29:44 +00:00
nvt-se 04bd414e1c enabled LPP by default. 2009-03-26 12:51:55 +00:00
nvt-se 90b9b9bae3 configure LPP parameters with slightly longer listen time since the CC1020
driver switches from TX mode to RX mode rather slowly.

decreased CCA check timeout.
2009-03-26 12:47:12 +00:00
nvt-se 25cc327acc avoid hanging in TX mode after CCA check failed.
minor memory savings.
2009-03-25 15:25:05 +00:00
nvt-se 96fbf3b853 use old style C comments.
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
2009-03-24 15:32:26 +00:00
nvt-se 15c447e57e remove some unnecessary instructions and function calls. patch from Jesper Karlsson. 2009-03-24 15:13:11 +00:00
nvt-se 143c7f9cea switched from serial to serial_line. patch from Jesper Karlsson. 2009-03-24 15:02:03 +00:00
fros4943 c76f34ff98 minor serial test application update 2009-03-21 15:47:40 +00:00
fros4943 9c9165dc90 start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations 2009-03-20 13:23:44 +00:00
nvt-se 6b22fa60e8 - avoid costly rx state initialization if the radio is already on.
- code formatting.
2009-03-19 14:43:31 +00:00
nvt-se 8f85355f02 print the MAC protocol name when starting the node 2009-03-19 14:14:06 +00:00
nvt-se b9ef907690 enable serial line tools using the same commands as the sky platform's Makefile 2009-03-17 22:27:14 +00:00
nvt-se 7e329ab467 removed obsolete file. 2009-03-17 22:20:04 +00:00
adamdunkels b1cd9c207a Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include 2009-03-17 21:51:13 +00:00
adamdunkels 727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels b20f0884ed Renamed serial module to serial-line 2009-03-17 20:19:11 +00:00
adamdunkels 0076bfe8a5 Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy 2009-03-17 15:56:32 +00:00
nvt-se 7f3def31b7 removed duplicate inclusion of header, and sorted the entries. 2009-03-17 15:02:19 +00:00
nvt-se 6d0fc26ec1 disabled unstable SD driver. 2009-03-17 15:01:40 +00:00
fros4943 d6ebba536c minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4 2009-03-13 14:40:07 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
dak664 932fc9f748 Remove tab that was preventing cgi invokation 2009-03-12 21:37:22 +00:00
adamdunkels 5920a86312 Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps 2009-03-12 19:15:23 +00:00
fros4943 99b9e80de9 make all quickstart target phony 2009-03-12 17:48:23 +00:00
fros4943 72fdf5b379 make quickstart goal precious 2009-03-12 15:12:50 +00:00
fros4943 063bf88f90 cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work
+
cygwin path fix for quickstart
2009-03-12 13:04:10 +00:00
nvt-se 80bbc92ffe patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known
in the header.
2009-03-12 12:23:22 +00:00
fros4943 5d27841807 + contiki app object 2009-03-11 08:40:37 +00:00
fros4943 bcb34297df reimplemented quickstart functionality 2009-03-11 07:45:54 +00:00
fros4943 0bc10750bc added rule for .cooja target.
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
2009-03-10 21:23:38 +00:00
julienabeille 0395ff5f39 sicslowpan Typo 2009-03-09 08:19:07 +00:00
c_oflynn 41c19115d2 fix compiling ravenusb platform 2009-03-06 15:21:45 +00:00
adamdunkels 3848bba210 Added support for serial data input 2009-03-06 00:13:56 +00:00
adamdunkels 8afff893f1 Removed old \mainpage documentation to avoid confusion with the main \mainpage 2009-03-02 22:04:14 +00:00
fros4943 3774395c82 cfs example updated 2009-03-02 09:44:07 +00:00
fros4943 286065b584 cfs updated 2009-03-02 09:34:47 +00:00
adamdunkels e3043b1be2 Enable communication power accounting for xmac by default 2009-03-01 20:43:37 +00:00
adamdunkels ac9ab9c582 #include lib/random.h 2009-03-01 20:42:10 +00:00
nvt-se 47d70f2ae3 Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option. 2009-03-01 12:00:00 +00:00
nvt-se b47221672a switched cfs offset type to signed long to allow backward movements with cfs_seek. 2009-02-28 13:41:16 +00:00
fros4943 9c8c4898f7 updating cooja cfs stubs according to recent commits 2009-02-27 16:06:25 +00:00
nvt-se 9f8f773b43 use unsigned long as cfs offset type. 2009-02-27 14:53:15 +00:00
oliverschmidt 03e7eb2535 Fixed comment (just to make sure that committing still works after all these months). 2009-02-27 07:57:13 +00:00
nvt-se 9b548619ed removed redundant definitions. 2009-02-25 23:57:13 +00:00
adamdunkels d761dfebd1 Bugfix: reduced the size of the uIP buffer to account for MAC header space 2009-02-25 10:23:03 +00:00
nvt-se c148e2e7ea Do not include codeprop.h by default. 2009-02-23 14:44:26 +00:00
nifi 0db6403c5d removed unnecessary reference to codeprop.h 2009-02-21 11:23:54 +00:00
adamdunkels 7781bbea58 Enabled X-MAC announcements by default, disabled polite broadcast announcements by default 2009-02-14 22:52:24 +00:00
adamdunkels 585620c102 Reverted the recent change from random_rand() to rand(). It turned out that
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
fros4943 f1fc4c879f cfs_coffee_get_fd_set() was renamed 2009-02-09 10:09:13 +00:00
nvt-se d0a546b049 A long refactoring session yielded the following.
Technical changes:

* Factored out file specific information from the file descriptor
  structure into a new file structure.

  - Useful file metadata can be stored after the file is closed.
  - File descriptors become much smaller.
  - Significantly reduces the need to scan for the file end.

* Use correct types in all function signatures.
* Removed the directory cache.

Results:

* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
2009-02-08 17:08:13 +00:00
adamdunkels 440899e4cb Seed rand() with the node ID + MAC address 2009-02-07 16:49:36 +00:00
adamdunkels 5cf0c25ca6 A few more minor fixes 2009-02-04 20:58:05 +00:00
adamdunkels 96882c402a Fixed conformance to Contiki code style :) 2009-02-04 20:55:41 +00:00
joxe 9689a579be added DCO/CPU speed re-synch each 30 seconds 2009-02-04 19:32:20 +00:00
fros4943 c16921f108 checkpointing library implemented for the sky platform (cfs interface is currently not optimized) 2009-02-04 17:51:49 +00:00
zhitao 5789bf5596 Modified comments for receiver filter bandwidth settings 2009-02-02 08:52:49 +00:00
joxe e5f0d786a8 fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted 2009-01-31 12:45:03 +00:00
fros4943 603740b13b removed compiler warning by returning 0 at undefined value 2009-01-23 17:08:17 +00:00
fros4943 ebcaf8eec8 removed compilation warning due to unused is_gateway variable (outside uIP mode) 2009-01-19 13:44:04 +00:00
adamdunkels e70b45c102 Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists 2009-01-15 22:12:46 +00:00
adamdunkels 29fe3d8741 Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board 2009-01-15 21:07:03 +00:00
adamdunkels 9f0006fde0 Driver for the acceleromenter sensors on the JCreate board 2009-01-15 21:06:02 +00:00
fros4943 5f3c1a0e12 elfloader executing loaded programs from ram (not rom) by default on msp430 platforms. 2009-01-15 09:04:04 +00:00
joxe d2dc732435 changed list_pop to return removed element 2008-12-16 09:59:42 +00:00
c_oflynn 5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
zhitao a50d5b701e direct the UART input stream to the default Contiki serial process 2008-12-09 15:56:39 +00:00
nvt-se 79d4d22ee7 replaced usage of 16-bit rimeaddr field. 2008-12-02 16:00:15 +00:00
fros4943 0ab57730f8 removed reference to the removed u16 rime address field 2008-12-01 13:20:51 +00:00
c_oflynn 9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
fros4943 6150d13254 support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson) 2008-11-28 16:41:26 +00:00
zhitao 6b33cf434f bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead 2008-11-25 16:05:22 +00:00
joxe 55280131fc added printout of MAC protocol name 2008-11-24 14:31:08 +00:00
fros4943 720357bc60 added log_message() implementation 2008-11-21 10:35:46 +00:00
c_oflynn 8bae6890a8 Changes by "David Kopf" <dak664@embarqmail.com> to:
-Add hit counter to index.html
 -Adding link to favicon.png
 -Fix serving of binary (image) files in avr-makefsdata file

Changes by Colin O'Flynn:
 -Removed extra linebreak in tutorial-raven.txt
 -Fix to contiki-conf.h in avr-rcb platform
2008-11-18 22:03:12 +00:00
oliverschmidt 7cf3165155 Replaced NETSIM macro with general (and now actually working) solution in Makefile.include. 2008-11-17 22:52:10 +00:00
oliverschmidt 7ac49a573b Reverted recent change as there's now a general (and actually working) solution in Makefile.include. 2008-11-17 22:40:10 +00:00
nvt-se 98a42524d3 minor formatting changes 2008-11-17 16:18:52 +00:00
zhitao 0be308b7ce changed RSSI samples count to maximum (=16) 2008-11-17 16:14:09 +00:00
c_oflynn 42dd7c37fc Changed timeout to 1 second on fragmentation 2008-11-16 16:07:13 +00:00
oliverschmidt a844636218 Minor docu update. 2008-11-13 20:26:27 +00:00
c_oflynn 699c493866 forgot these files for RCB... 2008-11-13 15:07:52 +00:00
zhitao 29b0d010d5 added #define for platform check 2008-11-13 14:25:47 +00:00
nvt-se 90691eb6a2 crc calculation contributed by Carlo Alberto Buano + some refactoring. 2008-11-11 12:24:43 +00:00
oliverschmidt d08a218a7a Minor formatting change. 2008-11-10 22:52:43 +00:00
oliverschmidt 24f04a57b2 Include wget shell command in "standard" shell environments. 2008-11-10 22:23:50 +00:00
oliverschmidt c109e102c4 Include wget shell command in "standard" shell environments. 2008-11-10 22:10:32 +00:00
nvt-se 1a6c909736 added sd_write declaration. 2008-11-10 14:32:49 +00:00