deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
4958 commits 6 branches 13 tags 80 MiB
Commit graph

724 commits

Author SHA1 Message Date
adamdunkels 1752b53f74 Refresh routes when a packet is received. Set a conservatively low route timeout (10 seconds). 2009-05-04 11:24:04 +00:00
adamdunkels c83c5c4c55 Removed automatic refresh of routes from the route_lookup() function and moved it into an explicit route_refresh() function. The previous behaviour was dangerous, since it meant that even bad routes that someone was looking for were considered fresh. Now such routes time out if they are not explictily refreshed (e.g., on a packet reception) 2009-05-04 11:23:30 +00:00
adamdunkels f5a57a4e54 Fixes by Ward Van Heddeghem (reapplied from versioin 1.24) 2009-04-30 20:21:06 +00:00
adamdunkels e70cf0c7c6 Rewrite of the collect module. The new version uses a packet queue for outgoing and forwarded packets so that more than one packet can be forwarded at the same time. The new version uses the packetqueue module to maintain the packet queue. 2009-04-29 20:48:57 +00:00
adamdunkels c489b1118d New module: packetqueue. The packetqueue module maintains packet queues for other modules. 2009-04-29 20:47:30 +00:00
adamdunkels cc44e89415 Reduced default strobe time, which seems to work well. Avoid running the interrupt if the power-save feature is turned off (fixes problems with serial data reception on a gateway mote) 2009-04-29 11:42:13 +00:00
adamdunkels c02a82ac41 Tag outgoing TCP packets with the ERELIABLE attribute so that an underlying power-saving MAC protocol can treat them differently, because it knows that an ACK might be arriving soon 2009-04-29 11:40:33 +00:00
adamdunkels c9df0ab123 Bugfix in debug message printout 2009-04-28 14:01:46 +00:00
adamdunkels 81ef83b856 Added option to wait randomly before sending a packet. A few code cleanups. Avoid switching radio off when sending a packet with end-to-end acks, because an ACK may arrive shortly after the transmission. 2009-04-28 14:00:53 +00:00
adamdunkels fdd05f5c71 Bugfix: psock send should use PT_WAIT_UNTIL() not PT_YIELD_UNTIL(). This improves TCP throughput by 100x under minimal-net 2009-04-28 13:52:04 +00:00
fros4943 7810d362a6 minor bugfixes: a rucb sender could not immediately after start receiving a bulk transfer 2009-04-16 14:32:01 +00:00
nvt-se c0fb680f12 simplified code by using udp_broadcast_new. 2009-04-13 19:55:15 +00:00
nvt-se 9765df97e5 support udp_broadcast_new also when using IPv6. Suggested by Wolf-Bastian Pttner. 2009-04-13 19:54:07 +00:00
adamdunkels ef4f5cc0e5 Made TCP MSS configurable 2009-04-10 00:37:48 +00:00
nifi 84b38de494 removed bitfields for compatibility with cc65 2009-04-09 21:54:09 +00:00
adamdunkels f5f52ffd1f Fixes by Ward Van Heddeghem (VUB) 2009-04-07 13:06:03 +00:00
nvt-se 03cd533712 made LISTEN_TIME and OFF_TIME configurable. 2009-04-07 11:29:08 +00:00
adamdunkels 5e456aea7d Added optimization for sending ACKs immediately. Turned optimizations on. Increased listening time to 1/64 s again due to problems with broadcasts with the 1/128 s setting 2009-04-06 22:50:35 +00:00
adamdunkels ace6567815 Added a timer that randomizes the retransmission of an incoming new trickle version to avoid broadcast collisions 2009-04-06 21:20:35 +00:00
adamdunkels be1c8ccec9 Added debug printouts 2009-04-06 21:19:34 +00:00
adamdunkels d02ac74bbc Increased size of temporary stack value to avoid overflowing when computation is done with 8-bit integers 2009-04-06 21:19:00 +00:00
nifi 000f740adc typo 2009-04-06 15:54:07 +00:00
nifi eab96e9b53 added rime-udp.c 2009-04-06 14:10:57 +00:00
nvt-se d6869018c7 turned off debugging. 2009-04-06 13:27:37 +00:00
nifi 9f2ff48fda added 802.15.4 frame packeter 2009-04-06 13:19:03 +00:00
nvt-se 3b2ad9cfc4 added packet forwarding and replaceable routing modules. 2009-04-06 13:18:50 +00:00
nvt-se 461ba4082c in case UIP_CONF_ROUTING is set, check if we have a registered routing 
module and use it for looking up the next hop of an address.
 2009-04-06 13:18:12 +00:00
nvt-se faf083f09d save copy of a rime address that points to a packet buffer, since the 
packet buffer is cleared and overwritten before the address usage is done.
 2009-04-06 13:16:39 +00:00
nvt-se c531f25c94 A module that enables Rime to run over UDP. 2009-04-06 13:13:26 +00:00
nvt-se 005578a722 added multihop routing support through replaceable modules. first implementation 
uses rime's route discovery by translating between ipv6 and rime addresses.
 2009-04-06 13:11:25 +00:00
nifi 4bc60d76d3 fixed alignment problem on MSP430 when using compression 2009-04-06 13:11:20 +00:00
adamdunkels ed1e945e66 Added guard code so that OFF_TIME is never zero 2009-04-03 20:08:05 +00:00
adamdunkels 8dbd2b2337 Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer. 2009-04-03 19:59:22 +00:00
adamdunkels 1d86b01bfb Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time. 2009-04-03 11:45:06 +00:00
adamdunkels 04101aae36 Fixed alignment problem on the MSP430, where the LPP header may be misaligned 2009-03-31 17:39:54 +00:00
nvt-se e2cc8b2a3e send all queued packet once we have the chance. 2009-03-31 14:44:13 +00:00
nvt-se 1d47e2a8da send immediate probes only if the packet is directed to us. 
sleep for OFF_TIME if the queue is empty.

restrict double packet lifetime timeouts to unicast packets.

stop ctimer in remove_queued_packet in case the function is not called
via the ctimer callback. it could overwrite a valid packet otherwise.
 2009-03-31 14:11:25 +00:00
nvt-se dd082f7fcf improvements to lpp based on code from Adam and discussions with Thiemo. 
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
 2009-03-31 12:47:00 +00:00
nvt-se d8caaca289 listen time and off time parameters configurable from outside because cc1020 needs longer listen time. 2009-03-26 12:50:57 +00:00
adamdunkels 73fdf05940 Added const to constant parameters (rime addresses) 2009-03-24 07:15:04 +00:00
adamdunkels a625d80259 Added explicit typecast to buffer definition 2009-03-24 07:14:12 +00:00
adamdunkels ec1677ca6c Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac 2009-03-23 21:06:26 +00:00
adamdunkels 1cbc0f4ea9 Send announcement packets only if there are any announcements to send 2009-03-23 21:00:25 +00:00
adamdunkels f4b8680174 Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary. 2009-03-23 19:37:45 +00:00
adamdunkels 39af9b361d Fixed minor bug in comment 2009-03-23 16:39:09 +00:00
adamdunkels 21e0900d18 Made constant addresses const 2009-03-23 16:22:02 +00:00
adamdunkels 143bf11548 The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers 2009-03-23 16:20:37 +00:00
adamdunkels c791d851bb Send an announcement packet only if there are more than zero announcemnets 2009-03-23 16:19:03 +00:00
nifi 91fa18e0e6 removed unused prototype 2009-03-23 10:58:00 +00:00
nvt-se cc85a36722 use u8 when writing rime addresses. 2009-03-21 20:53:06 +00:00
nvt-se 4b6c110706 fixed documentation typos. 2009-03-17 20:28:44 +00:00
nifi f0e56df2eb fixed compiler warning when timesynch is disabled 2009-03-17 09:57:01 +00:00
nvt-se 13b364bcc1 fixed documentation typos. 2009-03-15 20:29:04 +00:00
nvt-se 41ca9516a7 fixed documentation typos. 2009-03-15 20:21:16 +00:00
adamdunkels fb8fab739a Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 23:04:52 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
adamdunkels 537219bf27 Added a packet attribute to specify transmission power on outgoing packets 2009-03-11 20:33:17 +00:00
zhitao f304941ab4 raise busy forwarding flag before sending 2009-03-10 14:07:41 +00:00
julienabeille 2a173b465a more printing in debug mode 2009-03-10 08:00:59 +00:00
zhitao 1eb085834f Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes. 2009-03-09 12:54:27 +00:00
adamdunkels a1260c0c1f Documentation updates 2009-03-08 21:43:24 +00:00
adamdunkels 366ad7bece Added Rime documentation from the Rime/Chameleon paper (SenSys 2007) 2009-03-07 11:15:46 +00:00
zhitao 0a12098bd5 avoid ping pong packets during route disruption 2009-03-06 17:33:59 +00:00
adamdunkels dc7491f810 Bugfix and optimization: X-MAC did not properly switch the radio off after sending a packet, resulting in increased power consumption. For packets that require an ACK, we can let the radio be on in anticipation of the ACK (controlled with an WITH_ACK_OPTIMIZATION option) 2009-03-05 19:37:52 +00:00
zhitao 64badeb282 bugfix: use memcpy() to get attributes longer than a byte properly written to packet header 2009-03-05 13:51:28 +00:00
zhitao 08b2315f41 bugfix: put up busy forwarding flag only after next hop found 2009-03-04 08:59:32 +00:00
fros4943 f701615afa bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver. 
+ added function for checking if runicast is currently transmitting (non-acked) data
 2009-03-03 12:19:46 +00:00
adamdunkels 9816f49fe6 Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy 2009-03-02 22:00:41 +00:00
adamdunkels 78591a003f Minor documentation update 2009-03-02 21:56:16 +00:00
adamdunkels 45e32894a0 Bugfix: backwards definition of MIN macro (quite embarassing) 2009-03-02 11:22:09 +00:00
adamdunkels d813d343c5 Cleaned up old left-over code 2009-03-01 20:38:57 +00:00
adamdunkels 7010eb84b8 Added support for communication power accounting. Energy is attributed to idle listening when the radio is switched off. Enegrgy is attributed to an incoming packet when it is received. Energy is attributed to an outgoing packet when it is transmitted. 2009-03-01 20:37:16 +00:00
adamdunkels aa2f7a3399 Made polite announcement times configurable, added missing right-brace 2009-03-01 10:43:57 +00:00
adamdunkels 3adf8e5807 Call output packet sniffers after the MAC has sent the packet 2009-03-01 10:29:50 +00:00
oliverschmidt bc3d9d2e3c Minor rearrangement. 2009-02-28 11:57:46 +00:00
julienabeille f95c5df7d9 The global prefixes processed must be one less than the total amount of prefixes, as the link local one occupies one slot 2009-02-25 08:35:52 +00:00
adamdunkels 2aedc8490d Compile only if timesynch is enabled 2009-02-20 21:23:22 +00:00
adamdunkels e6907a1d8b Include random.h 2009-02-20 21:22:39 +00:00
adamdunkels 4ec5167276 Rewrote the tcpip_output() and tcpip_set_outputfunc() so that the latter is a proper function (which simplifies debugging) and so that tcpip_output() checks if the output callback function is NULL before calling it 2009-02-20 21:21:56 +00:00
julienabeille 10deaa6fc6 Removed CLOCK_SECOND from stimers in uIPv6, stimers are already in seconds 2009-02-20 07:59:35 +00:00
julienabeille 710e5c621c changed timer to stimer for neighbor, prefix, default router, address list 2009-02-19 16:42:41 +00:00
fros4943 97f76126e6 remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course) 2009-02-17 12:40:18 +00:00
c_oflynn 8516626703 Fixed documentation error (thanks to David Kopf) 2009-02-17 01:28:28 +00:00
adamdunkels 36bb3ece64 If no neighbor is found, we listen for announcements. Cleaned up debug output. 2009-02-16 01:18:53 +00:00
adamdunkels aaa8c9d2c9 Construct the X-MAC header on the stack instead of directly in the packet header, because the packet header may be misaligned. A bit of cleanup in the code too. 2009-02-15 22:05:06 +00:00
adamdunkels e4b1ff461e Added MAC-layer announcement beacons to X-MAC. Configuratble through XMAC_CONF_ANNOUNCEMENTS 2009-02-14 20:35:03 +00:00
adamdunkels 585620c102 Reverted the recent change from random_rand() to rand(). It turned out that 
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
 2009-02-11 11:08:53 +00:00
adamdunkels 9d75781a78 Added packet attributes for energy spent on a packet (RIMEBUF_ATTR_LISTEN_ENERGY and RIMEBUF_ATTR_TRANSMIT_ENERGY) 2009-02-10 23:51:12 +00:00
adamdunkels b15198b9a8 Bugfix: the Chameleon header parser modules should not clear the packet attributes, because the MAC or radio layers may have added attributes already 2009-02-10 23:49:58 +00:00
adamdunkels e1ef13dad6 Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...) 2009-02-10 00:44:50 +00:00
adamdunkels 6c95bd895a Added default initialization of polite announcements. Not sure where the best place for this is, but this at least allow us to start experimenting with this. 2009-02-09 22:05:33 +00:00
adamdunkels 3efb83c338 Added announcement includes 2009-02-09 21:09:42 +00:00
adamdunkels 0de445e035 Initialize the announcement module 2009-02-09 21:08:12 +00:00
adamdunkels 3670ef2f44 Rewrote the collect module so that it uses the announcement module rather than the neighbor-discovery module. This makes it possible to implement other annoumcement back-ends than the traditional broadcast-based neighbor discovery 2009-02-09 20:58:25 +00:00
adamdunkels dd9ffd87c4 Added missing #include announcement.h 2009-02-08 20:14:18 +00:00
adamdunkels 085df6b630 Improved version of LPP with support for broadcasts as well as announcement data in the probes 2009-02-08 19:30:18 +00:00
adamdunkels 91d280c4c9 Reverted to the old behaviour on broadcasts: send strobes for both unicast and broadcast packets. 2009-02-07 18:45:50 +00:00
adamdunkels 4b71003c2f Changed from random_rand() to rand() for better pseudo randomness 2009-02-07 18:43:45 +00:00
adamdunkels 752291f450 Changed from random_rand() to rand() function for (pseudo) random numbers because random_rand() does not work that well 2009-02-07 16:16:31 +00:00
adamdunkels 91e8487032 Added Doxygen documentation 2009-02-07 16:15:37 +00:00
adamdunkels be846d8c90 A new experimental network primitive called an 'announcement'. An 
announcement is an (ID, value) tuple that is disseminated to local
area neighbors. An application or protocol can explicitly listen to
announcements from neighbors. When an announcement is heard, a
callback is invoked.

Announcements can be used for a variety of network mechanisms such as
neighbor discovery, node-level service discovery, or routing metric
dissemination.

Application programs and protocols register announcements with the
announcement module. An announcement back-end, implemented by the
system, takes care of sending out announcements over the radio, as
well as collecting announcements heard from neighbors.
 2009-02-05 19:32:01 +00:00
fros4943 4f1a9d3c75 bugfix: stopping timeout timer when we receive route reply (still limited to only one active discovery) 2009-01-21 14:29:24 +00:00
adamdunkels 71e5adb254 Moved packet attributes specifications from rimebuf.h to the appropriate protocol header files 2009-01-15 22:15:51 +00:00
c_oflynn 5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
c_oflynn 17790ce46a Bug fix by David Kopf - sicslowpan timeout was always set at 20 seconds, this greatly improves performance!! 2008-12-02 22:04:16 +00:00
adamdunkels 50b1e60621 Rewrote the rimeaddr_copy() loop to use the ->u8 field instead of the ->u16 field (which now finally is removed) 2008-11-30 18:26:57 +00:00
adamdunkels 6951d9d582 Removed the unused ->u16 field (it was there only as a convenience/laziness access method during the initial development of the Rime stack, but has caused problems when being there) 2008-11-30 18:26:06 +00:00
oliverschmidt 7cf3165155 Replaced NETSIM macro with general (and now actually working) solution in Makefile.include. 2008-11-17 22:52:10 +00:00
fros4943 e42d572f81 updated for latest mac driver structure 2008-11-12 12:42:41 +00:00
zhitao 229d60d691 Neighbor ETX should accumulate over retransmission timeouts; 
Best neighbor has minimum sum of routing metric and neighbor ETX. Previously best neighbor prioritizes routing metric before neighbor ETX, which often causes a poor neighbor with a good upstream path to be selected.
 2008-11-12 10:47:17 +00:00
oliverschmidt 75ffd0640c Inform user about (most likely unintentional) call of dummy_tcpip_output_function. 2008-11-10 21:00:53 +00:00
adamdunkels 3b283a5ff3 Added dummy function so that tcpip_output() always is defined, even if tcpip_set_outputfunc() never has been called. This fixes a bug with programs attempting to use the network when compiled for the native platform. 2008-11-09 12:29:24 +00:00
adamdunkels 5243d58ac5 Added logic for announcing that a network has a gateway to the outside world (with the function uip_over_mesh_make_announced_gateway()). The announced gateway sends a trickle message to the network, containing the address of the gateway. Other nodes will then know that packets destined to the outside world should go through the gateway node. 2008-11-09 12:20:56 +00:00
adamdunkels 8851a6359a Remove unguarded printf() 2008-11-09 12:16:05 +00:00
oliverschmidt 28889f2210 Commented out otherwise unguarded printf(). 2008-11-06 23:15:58 +00:00
nvt-se 0c4f7bed8f temporary fix to get sicslowpan.c working on the Sky platform: 
conventional MAC implementations require a call to the MAC driver's
read function.
 2008-11-06 20:45:06 +00:00
adamdunkels d73124cc5e Bugfix: there was a problem with TCP segments not being properly retransmitted for protosockets-based applications. Cleaning up the logic around acknowledgements and retransmissions fixed the bugs pertaining to retransmissions of lost packets. This bugfix affects both the telnet server and the web server (which now work as expected wrt packet loss). 2008-10-31 18:10:24 +00:00
adamdunkels f623b81d59 Temporarily out-commented the problematic code and added a comment that describes the problem 2008-10-17 14:40:16 +00:00
mdurvy 75f036f698 uncommented the remove of the router (necessary for compliance) 2008-10-16 09:07:43 +00:00
blakelev 99f6932cdf Removed one line to prevent the default router from being removed 
prematurely.  This timer should not time out, but it does.
 2008-10-15 23:29:38 +00:00
adamdunkels adc57729c3 struct uip_udp_conn should be declared even if UIP_UDP is zero (it does not add any extra code) 2008-10-15 08:56:44 +00:00
adamdunkels e931260603 Added more curly brackets to ensure ANSI C compliance when UIP_TCP is defined; 2008-10-15 08:52:30 +00:00
adamdunkels 6a3565f5b6 Added an #if around the whole code if IPv6 is defined 2008-10-15 08:08:32 +00:00
adamdunkels 91910f82dd added curly brackets to ensure ANSI C compliance when UIP_TCP is defined; some automatic whitespace removal 2008-10-15 07:59:34 +00:00
adamdunkels 647443cb9d Added payload field to ICMP v4 header that was inadvertedly removed during the uIPv6 commits; automatic whitespace removal at line ends 2008-10-15 07:55:00 +00:00
julienabeille 2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille 4f9bc05f90 ping-ipv6 example compiles on native cygwin 2008-10-14 13:39:12 +00:00
adamdunkels fc1a8575d6 Removed unused include files (also automatically removed whitespace from line endings) 2008-10-14 12:26:18 +00:00
julienabeille 2e8264010b Main uIPv6 files addition - more 2008-10-14 09:42:33 +00:00
julienabeille f95cdc5abb Main uIPv6 files addition 2008-10-14 09:40:56 +00:00
adamdunkels 7b238a91af Don't turn on the radio on after sending a broadcast 2008-09-04 17:44:01 +00:00
adamdunkels 41dcd78c8b Improved debugging output 2008-08-15 19:28:33 +00:00
adamdunkels 31509ad726 Fixed a bunch of bugs in the collection neighbor announcement/discovery code: neighbor announcments were not repeated unless there was a change in the ETX val. Neighbor announcements happened to often when there were changes in the ETX. 2008-08-15 19:00:38 +00:00
adamdunkels 210782d9c6 Set the channel as a packet attribute 2008-08-15 18:59:22 +00:00
adamdunkels 9a4e5dfabf Rewrote the neighbor discovery code so that messages are suppressed if a lower rtmetric is received. This reduces the overall number of broadcast packets. 2008-07-09 09:33:58 +00:00
adamdunkels 9318117429 Fixed function prototype compiler warning 2008-07-08 10:59:31 +00:00
adamdunkels ba5c18a468 Rewrote the trickle code to run directly over the broadcast primitive: the previous implementation did not work as expected, because packets were not supressed correctly by the previous underlying netflood primitive 2008-07-07 23:29:30 +00:00
adamdunkels df33cb6e16 Only send ACK if it was possible to allocate a queuebuf to hold the data packet. 2008-07-07 23:27:57 +00:00
adamdunkels 4d35b905d3 Bugfix: check should cover min(hdrsize, datalen), not max 2008-07-07 23:27:05 +00:00
adamdunkels c0c26262c4 No need to send strobes for broadcast packets: just send the actual packet instead 2008-07-07 23:25:12 +00:00
adamdunkels cfcdac3122 Avoid crashing if Rime/Chameleon is not initialized when Rime code is run 2008-07-03 23:13:31 +00:00
adamdunkels 4687c2c948 Renamed Rime module mh to multihop 2008-07-03 22:36:02 +00:00
adamdunkels d9b3097037 Renamed Rime nf module to netflood 2008-07-03 22:25:22 +00:00
adamdunkels ec22f3c2fc Renamed Rime nf module to netflood 2008-07-03 22:02:09 +00:00
adamdunkels c2c3835110 Changed name of Rime module ruc to unicast 2008-07-03 21:52:25 +00:00
adamdunkels eddf71f534 Changed name of suc module to stunicast 2008-07-03 21:35:46 +00:00
adamdunkels 8a1ed696d9 Slightly nicer formatting 2008-07-03 21:34:12 +00:00
adamdunkels a6682c4bfd originator address is const 2008-07-03 17:58:10 +00:00
adamdunkels f274b26588 Added CC_CONST_FUNCTION as a work-around to the sdcc const function pointer bug 2008-07-03 07:38:52 +00:00
adamdunkels 040d65c1f6 Added missing #include sys/cc.h to make system compile 2008-07-03 07:37:51 +00:00
matsutsuka d194d54e8e CC_CONST_FUNCTION replaces some const keywords in order to workaround a sdcc bug, which cannot handle function pointers as const. 2008-07-02 15:02:33 +00:00
adamdunkels 05454ce929 Documentation bugfix 2008-07-02 14:10:28 +00:00
adamdunkels 66876625d4 Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*. 2008-07-02 09:05:40 +00:00
adamdunkels 1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
adamdunkels 7054083d88 Reverted mistakenly added #include for non-existant file 2008-06-30 20:00:53 +00:00
adamdunkels 1d1ab90642 Added rimebuf attributes for RSSI, timestamp, and network ID (used for e.g. 802.15.4 PAN ID) 2008-06-30 19:57:10 +00:00
adamdunkels 651a374eca Removed unused sibc module 2008-06-30 19:56:08 +00:00
adamdunkels 020a0c30aa Rewrote the collect module to use packet attributes instead of explicit headers 2008-06-30 09:15:22 +00:00
adamdunkels 6bbb99438e Cleaned up Rime makefile - removed sibc, changed name of sabc to stbroadcast 2008-06-30 08:29:32 +00:00
adamdunkels e6079870fe Changed name of the sabc module to stbroadcast 2008-06-30 08:28:53 +00:00
adamdunkels 1093a8fe28 Added name to mac structure. Do not turn radio on when sending a broadcast packet. Changed default off time to half a second. 2008-06-30 08:10:02 +00:00
adamdunkels 247de015b5 added name to mac structure 2008-06-30 08:09:17 +00:00
adamdunkels c9528fb010 Added name, made default listen time shorter 2008-06-30 08:08:59 +00:00
adamdunkels a7dfa95551 Added a 'name' field in the mac structure, which allows boot-up code to print out the name of the currently selected MAC protocol 2008-06-30 08:08:27 +00:00
adamdunkels 4349504219 Bugfix: fixed the missing arguments to make Rime compile 2008-06-27 16:44:58 +00:00
nifi 839b6111d6 Changed send function to return false if it was not possible to send 2008-06-26 11:38:59 +00:00
adamdunkels 63c620303a Changed the 'ibc' and 'uc' Rime modules into the more descriptive names 'broadcast' and 'unicast' 2008-06-26 11:19:22 +00:00
oliverschmidt a5fcfa2787 I seem to remember that we wanted to avoid ignoring gcc warnings that might trigger errors with other compilers ;-) 2008-05-16 21:31:57 +00:00
adamdunkels 532692e5a0 Removed reference to non-existant function rimebuf_attr_isset() 2008-05-16 15:04:10 +00:00
adamdunkels 8ea461b039 Changed on time to work with the current default tick time on the sky platform 2008-05-15 08:59:48 +00:00
adamdunkels dbab9fbdb5 A quick, initial implementation of the LPP power-saving MAC protocol (Musaloiu-E et al, IPSN 2008) 2008-05-15 08:56:29 +00:00
adamdunkels 1feb4fe3cb Removed call to tcpip_set_forwarding() - the UIP_CONF_IP_FORWARDING configuration option is used instead 2008-05-14 19:20:28 +00:00
adamdunkels 31ea41d8db Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level 2008-05-14 19:19:28 +00:00
nifi fe4f8f4339 clear attributes when clearing buffer 2008-04-03 09:07:28 +00:00
nifi f187981cd6 Fixed type offset bug in rimebuf_addr() and removed unused type for attributes and addresses. Replaced memcpy with loop. 2008-04-02 14:49:21 +00:00
nifi 8d47324d8f fixed typo 2008-04-01 13:22:59 +00:00
nifi fabe4393f7 fixed alignment problem with rime/chameleon 2008-04-01 13:10:22 +00:00
oliverschmidt 59145615b0 Changed packet forwarding from a runtime option to a compiletime option. This avoids pulling in uip-fw.o if forwarding isn't required (saves > 1400 bytes on 6502 targets). 
*** This change breaks all platforms calling tcpip_set_forwarding() ! These calls were intentionally not removed as they need to be replaced by setting the new compiletime option UIP_CONF_TCP_FORWARD - which should be done by the platform owners. ***
 2008-03-29 15:19:25 +00:00
adamdunkels 5901bf977a Changed assignment to explicit copy to enable compilation with SDCC 2008-03-20 09:40:31 +00:00
adamdunkels 39c85118d8 Ensure that header_module is != NULL before calling it. Define and print headers only if DEBUG is set. 2008-03-03 20:20:33 +00:00
oliverschmidt aa7ba44fb1 Avoided compiler warning. 2008-02-28 23:59:05 +00:00
oliverschmidt edbae75705 Stick to CC_INLINE. 2008-02-28 21:25:34 +00:00
fros4943 cefaa38581 -debugging output 2008-02-27 10:39:17 +00:00
adamdunkels a0c833da11 Mistakenly included development code in the Makefile target 2008-02-25 13:22:34 +00:00
adamdunkels 412facb831 This is an initial commit of an implementation of the Chameleon 
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.

The details are in our SenSys 2007 paper:

Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.

http://www.sics.se/~adam/dunkels07adaptive.pdf

This is a rewrite of the code that was developed for the paper.
 2008-02-25 02:14:34 +00:00
adamdunkels 974870359a Changed all occurences of u8_t and u16_t to uint8_t and uint16_t 2008-02-24 22:10:30 +00:00
adamdunkels d99ca27820 Changed all occurences of u8_t and u16_t to uint8_t and uint16_t 2008-02-24 22:05:27 +00:00
adamdunkels 3c1b0f4e65 Debug output slightly improved 2008-02-24 21:09:08 +00:00
adamdunkels 16c715aade Updated collect_open() definiton to match prototype declaration 2008-02-24 21:08:37 +00:00
adamdunkels be1dd57cb3 Stopping watchdog before sending packets to allow for wait times longer than 1 second. Reduced default on time to 5 ms. Added option for turning off X-MAC but keeping the radio turned on. 2008-02-24 21:07:28 +00:00
adamdunkels 32a3fa5d4a Added parameter to the mac off() method that specifies whether or not the radio should be turned off when the MAC layer is turned off 2008-02-24 21:05:28 +00:00
adamdunkels 436d1f25eb Added a configuration option for using u32 in the uip_ip4addr_t structure: UIP_CONF_UIP_IP4ADDR_T_WITH_U32 2008-02-24 21:04:15 +00:00
adamdunkels 8c782de931 Ensure that no more data than can be held by the buffer is sent with uip_send() 2008-02-24 21:03:24 +00:00
adamdunkels 49bc31236e Improved debug output 2008-02-24 21:02:09 +00:00
oliverschmidt 8f81934bfd Since revision 1.11 the usage of the label 'ip_send_nolen' isn't solely depending on UIP_UDP anymore. 2008-02-15 17:12:46 +00:00
oliverschmidt 081d50b878 Reverted part of recent change. The 32-bit member causes 32-bit alignment on 32-bit machines - at least without specific compiler options. That 32-bit alignment causes padding i.e. the ARP structure breaking the existing code. 2008-02-09 16:22:22 +00:00
nifi b06e6c60a9 Name fix on uip_all_zeroes_addr 2008-02-08 09:12:57 +00:00
adamdunkels 2187212703 Name fix on uip_all_zeroes_addr 2008-02-07 01:35:00 +00:00
adamdunkels d407fe2e9f Set TTL on outbound ICMP echo reply packets to make Windows tracert work 2008-02-07 01:34:25 +00:00
adamdunkels 245558fd56 Make windows tracert work: needs ICMP time exceeded sent for ICMP echo packets 2008-02-07 01:33:47 +00:00
adamdunkels fc603fdcc6 constness 2008-02-05 20:18:57 +00:00
adamdunkels 3d6c1c966b Bugfix: forwarding functions now have access to its packet headers. Added last hop to the arguments to the reception function 2008-02-05 20:17:43 +00:00
adamdunkels 33bcc24019 Increased timeouts, updated to match new mh API 2008-02-05 20:16:48 +00:00
adamdunkels 465f75736d Minor source code reformatting 2008-02-03 21:12:44 +00:00
adamdunkels f1bec7b955 Added the ability to send packets to an external network 2008-02-03 20:56:07 +00:00
adamdunkels 53f0b7feb8 Added line drawing code when compiled for the netsim target 2008-02-03 20:52:41 +00:00
adamdunkels 2886e03f57 Rewrote the neighbor code to use memb and a list instead of a static array 2008-02-03 20:44:11 +00:00
adamdunkels c576b7b01c Optimized transmission when interval == 0 2008-01-25 01:06:25 +00:00
adamdunkels 6e89e545b3 Added optional transmission of ICMP destimation unreachable in response to incoming UDP packets with an destination port that is not open. This is needed for correct operation of traceroute 2008-01-24 23:08:58 +00:00
adamdunkels c9508567a1 Bugfix: IP addresses in ICMP time exceeded messages were not transmitted correctly 2008-01-24 23:07:37 +00:00
adamdunkels 49ac5f9026 Show rt metric in netsim as number of expected transmissions 2008-01-24 21:11:40 +00:00
adamdunkels cdfe030980 Send immediately if interval == 0. Added debug information 2008-01-24 21:10:50 +00:00
adamdunkels bf8b5c093d Made timetable code optional 2008-01-24 06:17:51 +00:00
adamdunkels e7fb51b14c Added generic return valued 2008-01-24 06:17:33 +00:00
adamdunkels 29cc2b1266 Updated debug printouts 2008-01-23 16:10:10 +00:00
adamdunkels c8dccbbd40 Added a function for converting a timesynchronized time to a local (rtimer) time 2008-01-23 15:07:05 +00:00
adamdunkels 8a9b931a4b Rewrote most of the X-MAC code to make it easier to follow, debug and modify. Also added an optional, experimental time synchronized addition that makes X-MACs on different nodes explicitly de-synchronized 2008-01-23 15:00:54 +00:00
adamdunkels 5c169ac291 Better debug output 2008-01-21 12:19:27 +00:00
adamdunkels 57b54894f8 Removed mistakenly added development files 2008-01-14 16:05:34 +00:00
adamdunkels 34bd11905c Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer 2008-01-14 14:50:01 +00:00
adamdunkels 02ee418313 Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel 2008-01-14 14:22:16 +00:00
adamdunkels 042180c13f Rewrote the sniffer code to use a list, which makes it possible to add any number of sniffers. Sniffers now can be both for incoming and outoing packets. 2008-01-14 09:42:00 +00:00
adamdunkels 7fcb1f3b2a Updated debug output 2008-01-14 09:36:35 +00:00
adamdunkels 94f8978443 Rewrote the sniffer code to use a list, which makes it possible to add any number of sniffers. Sniffers now can be both for incoming and outoing packets. 2008-01-14 09:35:53 +00:00
adamdunkels b26754fd95 Removed unused code 2008-01-14 09:34:33 +00:00
adamdunkels 7b94bfb621 Rewrote the code to use polite broadcasts istead of regular broadcasts. This reduces the amount of broadcast traffic, particularly for dense networks. 2008-01-14 09:34:00 +00:00
adamdunkels bd125aaac6 Changed the code so that the rtimer is only set from the rtimer (interrupt) code, and not from the non-rtimer code. Removed unused code that was supposed to turn the radio off when a packet for another node was heard (but which didn't really work anyway). Changed default on time to 1/100 seconds, and off time to 1/2 seconds 2008-01-14 09:26:42 +00:00
adamdunkels f6b4022511 Setting a lower value now causes a discovery packet go out quicker 2008-01-08 08:27:25 +00:00
adamdunkels bac26c90c8 Made a primary transmission go out immediately instead of within a random interval 2008-01-08 08:26:48 +00:00
adamdunkels a20202231d Minor type change 2008-01-08 08:00:13 +00:00
adamdunkels d2be099c0e Bugfix: queue buffers were not freed when a new packet was sent, leading to memory leakage. Added debug output. 2008-01-08 07:59:51 +00:00
adamdunkels c6a43333d2 Call the timeout function only if it is non-NULL 2008-01-08 07:58:49 +00:00
adamdunkels 40d6216ec9 Added API for reading the routing table 2008-01-08 07:58:23 +00:00
adamdunkels 601560b1eb Added hopcount to callbacks 2008-01-08 07:55:56 +00:00
adamdunkels 0c748d7dd2 Debug formatting fixes 2008-01-08 07:55:15 +00:00
adamdunkels f737127cca Minor type change 2008-01-08 07:55:00 +00:00
adamdunkels 16142f12c7 Removed unused code 2008-01-08 07:54:40 +00:00
adamdunkels 88a010acdc Added a simple sniffer callback, which currently is a hack - a better solution would be a list of sniffers for both outgoing and incoming packets, but this will do for now. 2008-01-08 07:53:02 +00:00
adamdunkels 5b454bbd5f Added a simple sniffer callback, which currently is a hack - a better solution would be a list of sniffers for both outgoing and incoming packets, but this will do for now. Added trickle, neighbor & route includes. 2008-01-08 07:52:31 +00:00
adamdunkels 25a5434fb5 Sending with interval 0 made explicit 2008-01-07 14:53:04 +00:00
adamdunkels d33871facc Bugfix: hops should be at least one for all packets that are sent over the radio 2008-01-07 14:52:23 +00:00
oliverschmidt 00d75c8d16 Made use of uip_ipaddr_to_quad(). 2008-01-04 23:28:33 +00:00
oliverschmidt af6d9a59be Adjusted value (without distinguishing between Ethernet, SLIP, ...). 2007-12-23 20:24:46 +00:00
oliverschmidt a9ebc469b8 Avoid usage of POSIX function names even for static functions as some indirectly included system header might declare them. 2007-12-23 14:56:54 +00:00
oliverschmidt 8a4e2ec268 Fixed typo. 2007-12-22 12:02:43 +00:00
adamdunkels 3033b86753 Made the number of routing table entries configurable 2007-12-17 09:20:16 +00:00
adamdunkels 758411d06d Cleaned up #includes to avoid cyclic dependencies - the Rime includes no longer depend on rime.h 2007-12-17 09:14:08 +00:00
adamdunkels 8287215c82 Removed obsolete, unused files 2007-12-17 09:12:16 +00:00
adamdunkels 07e2ca9287 Documentation updates 2007-12-16 14:33:32 +00:00
adamdunkels 5c5775e93b Ensure that receiver_callback is set before calling it 2007-12-16 14:31:43 +00:00