Commit graph

4922 commits

Author SHA1 Message Date
adamdunkels fa1a96636e Bugfix: the compile-time check for UIP_LLADDR_LEN previously generated a run-time error, when it should have generated a compile-time error 2010-02-28 08:30:39 +00:00
adamdunkels ba0e50a7b7 Set the default number of MAC layer retransmissions for IPv6 packets to 2 2010-02-28 08:29:42 +00:00
adamdunkels 486f7f9728 Rewrite of the Sky shell collect test. The new test is better equipped
to handle reordered packets - unlike the previous test, the new test
counts all incoming packets in the data stream, even those that are
significantly reordered. The new test also shows the received packets
and their hop counts in a much more readable fashion.
2010-02-28 08:25:36 +00:00
dak664 5debc183a9 Enable radio stats in sensor cgi as default 2010-02-26 21:38:57 +00:00
dak664 844b3a34f7 Platform 0 was matching by default 2010-02-26 21:15:28 +00:00
dak664 195f5939c4 Clean up after testing 2010-02-26 20:51:48 +00:00
c_oflynn b5b77ac47a Use new HC06 2010-02-26 10:55:00 +00:00
nifi a373c426f0 Disabled the cross-level conversion of Contiki timestamp (currently not used by Contiki) 2010-02-26 08:15:41 +00:00
nifi 52d234417d Changed to draw the network traffic under the motes 2010-02-26 07:46:26 +00:00
nifi 512da4195c Changed to draw the mote relations under the motes 2010-02-26 07:38:08 +00:00
nifi 74df2dbf43 * Save selected packet analyzer chain and split pane position in simulation file
* Update all log entries when changing packet analyzer chain
* Added popup menu to verbose pane
* Added serialVersionUID to menu actions to avoid compiler warnings
2010-02-25 23:44:16 +00:00
joxe 83d203afb5 added support for hc06 decompression in radiologger / analyzer 2010-02-25 22:36:08 +00:00
adamdunkels b9827d2b36 Bugfix: didn't correctly reset the pending flag when a packet was read from the radio 2010-02-25 16:06:44 +00:00
joxe 80b289f7c1 updated sky platform for new sicslowpan 2010-02-25 15:51:37 +00:00
joxe 0ab2bc9a31 upgraded sicslowpan to hc-06 - no 48 bit multicast compression support yet 2010-02-25 15:50:58 +00:00
fros4943 026c4d7e85 synchronize time to timeline and radio logger at space key 2010-02-24 10:45:44 +00:00
fros4943 4c7ca7009b listen to all log interfaces, also mote debug interfaces 2010-02-24 10:38:35 +00:00
kasunch 350fb21ff7 Adding a Makfile for example applications. 2010-02-24 09:14:46 +00:00
kasunch 80a408526f Adding an example application for battery sensor 2010-02-24 09:13:56 +00:00
kasunch c90b76427a Adding ADC sources and battery sensor source to CONTIKI_TARGET_SOURCEFILES. 2010-02-24 09:09:35 +00:00
kasunch 0c9612b7b9 Adding battery sensor 2010-02-24 09:05:40 +00:00
kasunch ea53e5b845 Adding ADC functions 2010-02-24 09:04:58 +00:00
nifi 7ca6cb2ce2 fixed compiler warning 2010-02-23 23:06:04 +00:00
fros4943 be76ae53f9 added warning when reloading a simulation with less then 20% memory left 2010-02-23 22:53:34 +00:00
nifi b50d47fb80 added missing function in sicslowmac_driver 2010-02-23 22:45:11 +00:00
joxe fbc5b20404 added initial 802.15.4 and IPHC/hc06 analyzer 2010-02-23 22:35:17 +00:00
joxe 588d0374fa added initial 802.15.4 packet analyzer to COOJA radio logger 2010-02-23 22:32:57 +00:00
fros4943 cd8047bc77 added method that returns a mote with the given id 2010-02-23 21:55:55 +00:00
nifi 07ee8458e7 Fixed bootup printf() with 32-bit timer values 2010-02-23 21:02:30 +00:00
nifi bb9d430138 added bootup print of NETSTACK_RDC name 2010-02-23 20:54:09 +00:00
nifi 1cfcc8a73a Removed the combined name of CSMA and NETSTACK_RDC. The name of NETSTACK_RDC can be accessed separately if needed. 2010-02-23 20:42:45 +00:00
nifi c20047f657 Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration. 2010-02-23 20:09:11 +00:00
adamdunkels bb62749de7 Made debug printfs optional 2010-02-23 18:49:58 +00:00
adamdunkels 0ab2ba433f Bugfix: the wrong callback pointer was passed to higher layers. 2010-02-23 18:49:45 +00:00
adamdunkels ed52586e18 Rework of parts of the ContikiMAC code based on input from experimental results. When channel check is triggered because of a false positive, the new version checks the radio several times to make sure that there really is an incoming packet. Otherwise, the radio is switched off. Cleaned up and removed old unused code. Added a few temporary debugging mechanisms and functions. 2010-02-23 18:49:05 +00:00
adamdunkels 14bc9aa98b New and improved shell collect test: the new test sends out 10 packets from each node and counts the received packets. If less than 10 packets from each node is received, the test fails 2010-02-23 18:46:20 +00:00
adamdunkels 85a9f7db42 Fix bootup printf() with 32-bit timer values 2010-02-23 18:45:16 +00:00
adamdunkels eadfe5f3d6 Enabled 32-bit clock ticks to allow longer timeouts; experimentally disabled polite announcements in favour of a non-announcement based collect protocol 2010-02-23 18:44:52 +00:00
adamdunkels 69a5b67523 Updated netsim to new netstack API 2010-02-23 18:44:08 +00:00
adamdunkels 08f06d8039 Updated to new sensors API 2010-02-23 18:43:43 +00:00
adamdunkels 757ca59511 Added netstack init to native platform 2010-02-23 18:43:21 +00:00
adamdunkels ebea184116 Added netstack config for CC2420 radio driver, and also for cxmac RDC layer (which is not confirmed if it runs on real hardware, only tested in simulation) 2010-02-23 18:42:41 +00:00
adamdunkels 465125c5e7 Added support for 32-bit clock ticks: when reading the 32-bit value, make sure that it does not change between readouts to avoid reading right in the middle of it being updated 2010-02-23 18:41:20 +00:00
adamdunkels 50e1452564 Ugly workaround for internal error in mspgcc when applying the >= operator to two 32-bit values 2010-02-23 18:40:08 +00:00
adamdunkels 0c4c88ae66 Improved per-packet power profiling: if a packet is retransmitted, the new energy is added to the old energy so that it is possible to measure the full energy for all transmissions of the packet 2010-02-23 18:39:00 +00:00
adamdunkels ca0417a923 Added the MAC layer callback functionality so that the Rime network layer gets information from the MAC about the status of sent packets: were they successfully transmitted, or was there a collisions? How many retries were there? 2010-02-23 18:38:05 +00:00
adamdunkels f10eedab3e Added debug printout 2010-02-23 18:37:15 +00:00
adamdunkels 2d13fecea7 Improved backoff management: timer is now doubled on every transmission, until the using module calls the neighbor_discovery_start() function again. Don't cancel the transmission even if a lower value arrives (this fixes a problem with multi-hop ETX propagaion). 2010-02-23 18:36:50 +00:00
adamdunkels 0eade2886c Better loop handling: when a loop is detected, the neighbor to which the packet was originally sent gets an inflated ETX; made sure that collect without announcments work; increased timeouts, to work nicer in larger networks 2010-02-23 18:35:23 +00:00
adamdunkels a4d9d6651b Added the option to specify the old value to observers so that they can determine if the announcement should be sent out quicklier than otherwise 2010-02-23 18:32:44 +00:00