Commit graph

159 commits

Author SHA1 Message Date
Yasuyuki Tanaka
e5ac3df7e1 Include uip-mcast6.h to refer to UIP_IPV6_MULTICAST 2016-06-20 16:35:09 +02:00
Yasuyuki Tanaka
ca3a4726d1 Rename two macros related to multicast, which are not user configuration
- UIP_CONF_IPV6_MULTICAST -> UIP_IPV6_MULTICAST
- RPL_CONF_MULTICAST      -> RPL_WITH_MULTICAST
2016-06-20 16:35:09 +02:00
Yasuyuki Tanaka
704847db04 Fix a typo, UIP_IPV6_CONF_MULTICAST, in a comment with UIP_CONF_IPV6_MULTICAST 2016-06-20 16:35:09 +02:00
Simon Duquennoy
6c4d5312ae uip-icmp6.c: call rpl_insert_header only when UIP_CONF_IPV6_RPL is set 2016-06-08 14:03:28 +02:00
Simon Duquennoy
f26ea34c61 Run RPL regression tests in non-storing mode 2016-06-08 14:03:19 +02:00
Simon Duquennoy
b3e31e1456 Implement RPL non-storing mode 2016-06-08 14:02:45 +02:00
Billy Kozak
72b4d38ab3 Put some uip6 temporaries on the stack
Some "temporary" variables were declared with static storage duration
for no good reason.

Replaced them with local stack variables wherever they were used.

There are still some variables that are unecesarily given static
duration which I have left alone.
2016-06-07 09:59:46 -06:00
Simon Duquennoy
426e10c3ed Rehauling of RPL OFs, both MRHOF and OF0. Fixed compliance with RFC6551, 6552, 6719. Now using the link-stats module. 2016-06-03 15:46:06 +02:00
Simon Duquennoy
2fa239ee8d Added link-stats module to keep strack of link statistics and their freshness 2016-06-03 15:46:04 +02:00
Simon Duquennoy
b3ea124958 Merge pull request #1394 from joakimeriksson/nbrtable-nd6-fix
Removed memcpy that cause inconsistency in nbr-table when adding nd6 neighbors.
2016-06-03 14:44:54 +02:00
Antonio Lignan
9e1c378919 Merge pull request #1469 from wbober/nrf52dk-pr
Add support for nRF52 DK platform
2016-06-01 23:11:39 +02:00
Antonio Lignan
4251539237 Merge pull request #1579 from bkozak-scanimetrics/fix_csma_backoff
Use collisions for csma backoff and retry
2016-04-28 10:24:55 +02:00
Simon Duquennoy
90b886aa71 Csma: comply with IEEE 802.15.4 2016-04-25 08:52:48 -06:00
Simon Duquennoy
f0f13fa58b Indent uip6.c 2016-04-25 11:50:14 +02:00
Joakim Eriksson
186138f6af added error check for extraction of aligned llao 2016-04-22 15:03:03 +02:00
Joakim Eriksson
e9e31e9fd1 replaced add/remove ds6-nbr with an nbr-module controlled update of lladdress to avoid loss of other state information 2016-04-19 13:41:13 +02:00
Joakim Eriksson
2e852f758b added a null check on the lladdr before the memcmp. 2016-04-19 13:36:43 +02:00
Joakim Eriksson
223f002676 fixed the case when the lladdr did not change but the LLAO is there and it is not an override. 2016-04-19 13:36:43 +02:00
Joakim Eriksson
6f271bf853 fixed so that the comparison of old lladdr and llao lladdr is compared instead of two llaos - and improved code style on surrounding code 2016-04-19 13:36:43 +02:00
Joakim Eriksson
b2f72fc996 replaces with aligned lladdress and also fixed the second memcpy to avoid risk of inconsistency when nodes change MAC address 2016-04-19 13:36:43 +02:00
Joakim Eriksson
510fc9e51e removed memcpy that cause inconsistency in nbr-table when adding nd6 neighbor with NS/NA. 2016-04-19 13:36:43 +02:00
Joakim Eriksson
12a75c3e43 fixed codestyle, improved APIs, and cleaned up comments 2016-03-26 20:12:52 +01:00
Joakim Eriksson
09c624dcd3 fixed clearing of state flag and avoid starting retransmission timer 2016-03-26 09:45:38 +01:00
Joakim Eriksson
4246a8fbe6 updated more nbr_add calls 2016-03-26 09:45:37 +01:00
Joakim Eriksson
444015df67 refactored the rpl-nbr-policy to be called from nbr-table module 2016-03-26 09:45:37 +01:00
Joakim Eriksson
d181bd9e6f added config for enabling/disabling removal of oldest route and added support function for checking if lladdress is used as nexthop 2016-03-26 09:28:09 +01:00
Joakim Eriksson
513393db54 added return value so that caller know if a nbr was removed or not 2016-03-26 09:28:09 +01:00
Joakim Eriksson
946be77248 Added support for end-to-end DAO ACK for Contiki RPL.
This is a fix for Contiki RPL so that it fully supports DAO ACK in
an end-to-end fashion. When DAO is sent it will be forwarded upwards
as before. DAO ACK will be forwarded downwards until it reach the node
that initiated the DAO ACK and unlike before it is not a single-hop
DAO ACK but it is fully reaching the RPL ROOT before any DAO ACK is
sent back. DAO ACK also now fully support different status messages
(success / fail).
2016-03-26 09:28:08 +01:00
Simon Duquennoy
5e5904d10e Merge pull request #1387 from simonduq/pr/ndfree-rpl-fix
NDP disabled: also disable uip_ds6_neighbor_periodic
2016-03-14 16:42:45 +01:00
Simon Duquennoy
cd981b23d5 Merge pull request #1297 from simonduq/pr/default-prefix
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-13 20:39:16 +01:00
Simon Duquennoy
3fa25eac8c uip6: fix bug that caused the payload of ICMPv6 messages not to match that of the original packet 2016-03-10 12:22:23 +01:00
Simon Duquennoy
06e984a02e uip6: enable sending of "port unreachable" ICMPv6 message 2016-03-10 12:22:15 +01:00
Simon Duquennoy
5886bdea31 uip_icmp6_error_output: remove and add RPL ext header instead of inverting it, so that the payload of the returned ICMP error matches the original packet 2016-03-10 12:22:05 +01:00
Simon Duquennoy
9930756d7c uip6: restore proto after calling remove_ext_hdr 2016-03-10 12:21:55 +01:00
Simon Duquennoy
add5a8be67 Code style 2016-03-10 11:33:40 +01:00
Simon Duquennoy
dea04c67d7 Change the default IPv6 prefix from aaaa::/64 to fd00::/64 2016-03-07 17:47:44 +01:00
Joakim Nohlgård
2e47bf9cdc core/net/ipv6/sicslowpan.c: fix warning: function declaration isn't a prototype 2016-03-02 07:00:57 +01:00
Nicolas Tsiftes
65caef495a Merge pull request #1354 from tsparber/pr-count-icmp-stats
uIP Stats: Count sent ICMP6 packets
2016-02-26 15:16:35 +01:00
Wojciech Bober
803d170b55 Fixed unsused variable warning when SICSLOWPAN_CONF_FRAG is undefined 2016-02-15 09:37:38 +01:00
Wojciech Bober
1cc659d882 Allow for using a fixed frame header length.
When SICSLOWPAN_FRAMER_HDRLEN is defined its value is used
as a frame header length. This allows for using sicslowpan
without calling a framer. This is usefull if framer is not
used on a given platform or when header length is always
the same.

In addition this commit also fixes an inline define.
2016-02-15 09:37:38 +01:00
Nicolas Tsiftes
4dce5f6765 Merge pull request #1494 from simonduq/pr/uip6-debug
Minor debug output fixes
2016-02-04 13:09:21 +01:00
Simon Duquennoy
521cc7600d Minor debug output fixes 2016-02-03 17:10:24 +01:00
Simon Duquennoy
f0d1b6c5bb Fix PRINTF statement in sicslowpan 2016-02-02 17:18:45 +01:00
Joakim Eriksson
6ef8f47764 Style fixes, LLSEC.overhead and MAC_MAX_PAYLOAD 2016-01-19 19:54:27 +01:00
Joakim Eriksson
02e07607a7 removed old HC1 code since it is not expected to be used and removed NH_COMPRESSOR 2016-01-19 15:29:14 +01:00
Joakim Eriksson
d4dc45e096 updated sicslowpan documentation and platform configurations 2016-01-19 15:27:14 +01:00
Joakim Eriksson
d0448df3b8 added support for multiple reassemblies 2016-01-19 15:17:59 +01:00
George Oikonomou
fa40d2b1fc Remove documentation references to the Sensinode platform
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:09:31 +00:00
Simon Duquennoy
f86494c6aa Added missing include (needed for type uip_ipaddr_t) 2015-12-04 15:21:49 +01:00
Simon Duquennoy
dfd61b6cc9 uip-ds6-route: make nbr_routes global 2015-12-04 15:21:48 +01:00