deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
4607 commits 6 branches 13 tags 80 MiB
Commit graph

1137 commits

Author SHA1 Message Date
fros4943 3b3580e439 disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki 2009-04-01 18:11:48 +00:00
fros4943 aa736322e1 removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead 2009-04-01 17:17:55 +00:00
fros4943 3665422d8d simplified cooja communication stacks initialization + added uipv6 stack 2009-04-01 13:50:12 +00:00
fros4943 6a99a82516 copied uipv6 configuration from native platform 2009-04-01 13:46:56 +00:00
fros4943 1c031504e5 no need to initialize serial line 2009-04-01 13:46:16 +00:00
fros4943 892bfb5678 moved radio-uip link functionality directly to comm stack sources 2009-04-01 13:45:41 +00:00
fros4943 eddd8350c5 renamed radio driver 2009-04-01 13:44:34 +00:00
fros4943 afed9bb2d0 icnlude packet radio by default 2009-04-01 13:39:54 +00:00
nifi c6b15c289e * show radio channel at startup 
* only initialize timesynch when timesynch is enabled
 2009-03-31 13:25:50 +00:00
nvt-se e90149b7b4 avoid switching mode when tx or rx is active. 
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
 2009-03-30 14:07:34 +00:00
fros4943 5f1fda0406 removed unused variables + writing serial data in timeevent 2009-03-26 16:23:47 +00:00
fros4943 dda6de8438 + clock stub functions 2009-03-26 16:22:36 +00:00
fros4943 ac22ad5081 changed the Makefile rules for uploading to sky-nodes. 
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
 2009-03-26 13:29:44 +00:00
nvt-se 04bd414e1c enabled LPP by default. 2009-03-26 12:51:55 +00:00
nvt-se 90b9b9bae3 configure LPP parameters with slightly longer listen time since the CC1020 
driver switches from TX mode to RX mode rather slowly.

decreased CCA check timeout.
 2009-03-26 12:47:12 +00:00
nvt-se 25cc327acc avoid hanging in TX mode after CCA check failed. 
minor memory savings.
 2009-03-25 15:25:05 +00:00
nvt-se 96fbf3b853 use old style C comments. 
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
 2009-03-24 15:32:26 +00:00
nvt-se 15c447e57e remove some unnecessary instructions and function calls. patch from Jesper Karlsson. 2009-03-24 15:13:11 +00:00
nvt-se 143c7f9cea switched from serial to serial_line. patch from Jesper Karlsson. 2009-03-24 15:02:03 +00:00
fros4943 c76f34ff98 minor serial test application update 2009-03-21 15:47:40 +00:00
fros4943 9c9165dc90 start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations 2009-03-20 13:23:44 +00:00
nvt-se 6b22fa60e8 - avoid costly rx state initialization if the radio is already on. 
- code formatting.
 2009-03-19 14:43:31 +00:00
nvt-se 8f85355f02 print the MAC protocol name when starting the node 2009-03-19 14:14:06 +00:00
nvt-se b9ef907690 enable serial line tools using the same commands as the sky platform's Makefile 2009-03-17 22:27:14 +00:00
nvt-se 7e329ab467 removed obsolete file. 2009-03-17 22:20:04 +00:00
adamdunkels b1cd9c207a Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include 2009-03-17 21:51:13 +00:00
adamdunkels 727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels b20f0884ed Renamed serial module to serial-line 2009-03-17 20:19:11 +00:00
adamdunkels 0076bfe8a5 Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy 2009-03-17 15:56:32 +00:00
nvt-se 7f3def31b7 removed duplicate inclusion of header, and sorted the entries. 2009-03-17 15:02:19 +00:00
nvt-se 6d0fc26ec1 disabled unstable SD driver. 2009-03-17 15:01:40 +00:00
fros4943 d6ebba536c minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4 2009-03-13 14:40:07 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
dak664 932fc9f748 Remove tab that was preventing cgi invokation 2009-03-12 21:37:22 +00:00
adamdunkels 5920a86312 Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps 2009-03-12 19:15:23 +00:00
fros4943 99b9e80de9 make all quickstart target phony 2009-03-12 17:48:23 +00:00
fros4943 72fdf5b379 make quickstart goal precious 2009-03-12 15:12:50 +00:00
fros4943 063bf88f90 cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work 
+
cygwin path fix for quickstart
 2009-03-12 13:04:10 +00:00
nvt-se 80bbc92ffe patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known 
in the header.
 2009-03-12 12:23:22 +00:00
fros4943 5d27841807 + contiki app object 2009-03-11 08:40:37 +00:00
fros4943 bcb34297df reimplemented quickstart functionality 2009-03-11 07:45:54 +00:00
fros4943 0bc10750bc added rule for .cooja target. 
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
 2009-03-10 21:23:38 +00:00
julienabeille 0395ff5f39 sicslowpan Typo 2009-03-09 08:19:07 +00:00
c_oflynn 41c19115d2 fix compiling ravenusb platform 2009-03-06 15:21:45 +00:00
adamdunkels 3848bba210 Added support for serial data input 2009-03-06 00:13:56 +00:00
adamdunkels 8afff893f1 Removed old \mainpage documentation to avoid confusion with the main \mainpage 2009-03-02 22:04:14 +00:00
fros4943 3774395c82 cfs example updated 2009-03-02 09:44:07 +00:00
fros4943 286065b584 cfs updated 2009-03-02 09:34:47 +00:00
adamdunkels e3043b1be2 Enable communication power accounting for xmac by default 2009-03-01 20:43:37 +00:00
adamdunkels ac9ab9c582 #include lib/random.h 2009-03-01 20:42:10 +00:00
nvt-se 47d70f2ae3 Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option. 2009-03-01 12:00:00 +00:00
nvt-se b47221672a switched cfs offset type to signed long to allow backward movements with cfs_seek. 2009-02-28 13:41:16 +00:00
fros4943 9c8c4898f7 updating cooja cfs stubs according to recent commits 2009-02-27 16:06:25 +00:00
nvt-se 9f8f773b43 use unsigned long as cfs offset type. 2009-02-27 14:53:15 +00:00
oliverschmidt 03e7eb2535 Fixed comment (just to make sure that committing still works after all these months). 2009-02-27 07:57:13 +00:00
nvt-se 9b548619ed removed redundant definitions. 2009-02-25 23:57:13 +00:00
adamdunkels d761dfebd1 Bugfix: reduced the size of the uIP buffer to account for MAC header space 2009-02-25 10:23:03 +00:00
nvt-se c148e2e7ea Do not include codeprop.h by default. 2009-02-23 14:44:26 +00:00
nifi 0db6403c5d removed unnecessary reference to codeprop.h 2009-02-21 11:23:54 +00:00
adamdunkels 7781bbea58 Enabled X-MAC announcements by default, disabled polite broadcast announcements by default 2009-02-14 22:52:24 +00:00
adamdunkels 585620c102 Reverted the recent change from random_rand() to rand(). It turned out that 
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
 2009-02-11 11:08:53 +00:00
fros4943 f1fc4c879f cfs_coffee_get_fd_set() was renamed 2009-02-09 10:09:13 +00:00
nvt-se d0a546b049 A long refactoring session yielded the following. 
Technical changes:

* Factored out file specific information from the file descriptor
  structure into a new file structure.

  - Useful file metadata can be stored after the file is closed.
  - File descriptors become much smaller.
  - Significantly reduces the need to scan for the file end.

* Use correct types in all function signatures.
* Removed the directory cache.

Results:

* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
 2009-02-08 17:08:13 +00:00
adamdunkels 440899e4cb Seed rand() with the node ID + MAC address 2009-02-07 16:49:36 +00:00
adamdunkels 5cf0c25ca6 A few more minor fixes 2009-02-04 20:58:05 +00:00
adamdunkels 96882c402a Fixed conformance to Contiki code style :) 2009-02-04 20:55:41 +00:00
joxe 9689a579be added DCO/CPU speed re-synch each 30 seconds 2009-02-04 19:32:20 +00:00
fros4943 c16921f108 checkpointing library implemented for the sky platform (cfs interface is currently not optimized) 2009-02-04 17:51:49 +00:00
zhitao 5789bf5596 Modified comments for receiver filter bandwidth settings 2009-02-02 08:52:49 +00:00
joxe e5f0d786a8 fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted 2009-01-31 12:45:03 +00:00
fros4943 603740b13b removed compiler warning by returning 0 at undefined value 2009-01-23 17:08:17 +00:00
fros4943 ebcaf8eec8 removed compilation warning due to unused is_gateway variable (outside uIP mode) 2009-01-19 13:44:04 +00:00
adamdunkels e70b45c102 Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists 2009-01-15 22:12:46 +00:00
adamdunkels 29fe3d8741 Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board 2009-01-15 21:07:03 +00:00
adamdunkels 9f0006fde0 Driver for the acceleromenter sensors on the JCreate board 2009-01-15 21:06:02 +00:00
fros4943 5f3c1a0e12 elfloader executing loaded programs from ram (not rom) by default on msp430 platforms. 2009-01-15 09:04:04 +00:00
joxe d2dc732435 changed list_pop to return removed element 2008-12-16 09:59:42 +00:00
c_oflynn 5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
zhitao a50d5b701e direct the UART input stream to the default Contiki serial process 2008-12-09 15:56:39 +00:00
nvt-se 79d4d22ee7 replaced usage of 16-bit rimeaddr field. 2008-12-02 16:00:15 +00:00
fros4943 0ab57730f8 removed reference to the removed u16 rime address field 2008-12-01 13:20:51 +00:00
c_oflynn 9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com> 
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
 2008-11-29 15:55:02 +00:00
fros4943 6150d13254 support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson) 2008-11-28 16:41:26 +00:00
zhitao 6b33cf434f bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead 2008-11-25 16:05:22 +00:00
joxe 55280131fc added printout of MAC protocol name 2008-11-24 14:31:08 +00:00
fros4943 720357bc60 added log_message() implementation 2008-11-21 10:35:46 +00:00
c_oflynn 8bae6890a8 Changes by "David Kopf" <dak664@embarqmail.com> to: 
-Add hit counter to index.html
 -Adding link to favicon.png
 -Fix serving of binary (image) files in avr-makefsdata file

Changes by Colin O'Flynn:
 -Removed extra linebreak in tutorial-raven.txt
 -Fix to contiki-conf.h in avr-rcb platform
 2008-11-18 22:03:12 +00:00
oliverschmidt 7cf3165155 Replaced NETSIM macro with general (and now actually working) solution in Makefile.include. 2008-11-17 22:52:10 +00:00
oliverschmidt 7ac49a573b Reverted recent change as there's now a general (and actually working) solution in Makefile.include. 2008-11-17 22:40:10 +00:00
nvt-se 98a42524d3 minor formatting changes 2008-11-17 16:18:52 +00:00
zhitao 0be308b7ce changed RSSI samples count to maximum (=16) 2008-11-17 16:14:09 +00:00
c_oflynn 42dd7c37fc Changed timeout to 1 second on fragmentation 2008-11-16 16:07:13 +00:00
oliverschmidt a844636218 Minor docu update. 2008-11-13 20:26:27 +00:00
c_oflynn 699c493866 forgot these files for RCB... 2008-11-13 15:07:52 +00:00
zhitao 29b0d010d5 added #define for platform check 2008-11-13 14:25:47 +00:00
nvt-se 90691eb6a2 crc calculation contributed by Carlo Alberto Buano + some refactoring. 2008-11-11 12:24:43 +00:00
oliverschmidt d08a218a7a Minor formatting change. 2008-11-10 22:52:43 +00:00
oliverschmidt 24f04a57b2 Include wget shell command in "standard" shell environments. 2008-11-10 22:23:50 +00:00
oliverschmidt c109e102c4 Include wget shell command in "standard" shell environments. 2008-11-10 22:10:32 +00:00
nvt-se 1a6c909736 added sd_write declaration. 2008-11-10 14:32:49 +00:00
adamdunkels 34e2734cd9 Use the uip-over-mesh network gateway functionality 2008-11-09 12:30:32 +00:00
adamdunkels 83155d48f9 Moved the network gateway logic to the uip-over-mesh module. 2008-11-09 12:22:04 +00:00
c_oflynn b6e76a4947 Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface 2008-11-08 17:11:18 +00:00
c_oflynn f13ec95efa *** empty log message *** 2008-11-08 03:29:15 +00:00
nvt-se 0c4f7bed8f temporary fix to get sicslowpan.c working on the Sky platform: 
conventional MAC implementations require a call to the MAC driver's
read function.
 2008-11-06 20:45:06 +00:00
nvt-se 21e4b4be80 map rime address to mac address for ipv6 2008-11-06 15:14:24 +00:00
nvt-se c5d9795f92 added initialization for uip6 2008-11-05 15:34:04 +00:00
nvt-se d1d09ea1fd added IPV6 configuration. 2008-11-05 14:31:06 +00:00
nvt-se 7ac98ee257 added missing watchdog_periodic 2008-11-04 15:46:59 +00:00
adamdunkels 1d56451d11 Changed the default IP address to match the default setting in tapdev 2008-10-31 18:11:44 +00:00
oliverschmidt 072830d4f2 Migrated project files from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). Almost all changes were required because VC++ 2008 does a parallel build. Therefore all intermediate files need to have unique names. This wasn't the case by default because VC++ doesn't presume seperate projects to build into the same directory - as it is the case with all the *.prg and *.dsc files of Contiki. 2008-10-29 15:03:34 +00:00
oliverschmidt ebcafc68c8 Migrated solution file from VC++ 2005 (Express Edition) to VC++ 2008 (Express Edition). 2008-10-29 14:59:35 +00:00
joxe bc39f2a86c added get_rssi_packet for getting RSSI from the last packet received 2008-10-29 09:22:39 +00:00
fros4943 641c48ee00 not limiting random seed to 99 2008-10-28 15:37:34 +00:00
nvt-se 4829ffea50 removed supererogatory file 2008-10-28 14:07:32 +00:00
nvt-se 59012007b9 added an SD example application 2008-10-28 12:56:57 +00:00
nvt-se 1fdb3c21f0 fixed problems with uart and sd cards. 2008-10-28 12:42:53 +00:00
c_oflynn f301f9d118 Changed copyright. 2008-10-15 15:59:38 +00:00
mvidales 2e2eb8d387 changed stabs to dwarf-2 for debugging. 2008-10-15 15:42:18 +00:00
c_oflynn 1375511179 Fix to allow building without LCD interface 2008-10-15 14:38:20 +00:00
mdurvy acfe78a51a last version of the raven lcd user interface 2008-10-15 13:13:49 +00:00
adamdunkels 3428e17cea Changed the \mainpage doxygen tag to avoid confusion with the main Contiki \mainpage 2008-10-15 12:37:59 +00:00
adamdunkels ba43d94ef7 Define IPv6 options only if UIP_CONF_IPV6 is defined (which should be defined by the Makefile.include if IPv6 is enabled) 2008-10-15 09:14:25 +00:00
c_oflynn 1c5a27f693 Moved raven-lcd.h file 2008-10-14 22:05:09 +00:00
c_oflynn 6e42bd3496 example\webserver-ipv6-raven works! 2008-10-14 21:29:23 +00:00
c_oflynn d5865cb2b6 -Change needed for ravenusb to build 
-Reverts Makefile.include back to 1.57, then apply the needed change
 2008-10-14 20:31:46 +00:00
c_oflynn a520fe4646 Lots of changes / commits! This allows ravenusbstick example to build at least. 2008-10-14 19:06:51 +00:00
julienabeille 2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille 08465a6c19 new-ipv6 compiles on native cygwin 2008-10-14 14:00:58 +00:00
julienabeille 4f9bc05f90 ping-ipv6 example compiles on native cygwin 2008-10-14 13:39:12 +00:00
julienabeille 9b2961046a Modifs to minimal-net for IPv6 support 2008-10-14 10:06:26 +00:00
adamdunkels 0a961b2ada Contiki port for the Atmel AVR Raven board 2008-10-14 09:40:30 +00:00
nvt-se aff141f56e reduced default sizes 2008-10-09 14:56:53 +00:00
fros4943 115a2b0782 renaming printf/putchar/puts symbols to avoid jni library loading overriding our custom implementations 
experimental: directly references objcopy (tested on win32+linux)
 2008-10-05 15:43:09 +00:00
fros4943 d79b1d55f7 not implementing putc(..FILE*) function, only stdout 2008-10-05 15:40:27 +00:00
nvt-se 10639bc982 use abstract types for offsets and pages so that we can easily port it to 
very large or small memories.
 2008-10-03 19:27:28 +00:00
fros4943 4cc56a741d printf implementation towards cooja 2008-10-03 09:41:16 +00:00
fros4943 08502eb344 removed refences to printf2log.h 2008-10-03 09:39:38 +00:00
fros4943 2fb6410e4d removed old printf output conversion method, instead implementing putchar() and printf() 2008-10-03 09:37:32 +00:00
joxe 1a1ddd0bd5 removed energest-arch from sky and esb platforms 2008-09-29 12:38:18 +00:00
nvt-se 9c3f5beec7 added a small guide. 2008-09-26 18:14:12 +00:00
nvt-se 37fa4da899 support 9600 baud 2008-09-19 12:18:04 +00:00
joxe 5b1c229754 fixed battery sensor for sky platform 2008-09-18 21:29:06 +00:00
joxe 5d860b1df2 changed sleep to go into LPM3 2008-09-18 17:58:21 +00:00
joxe 8aa8e26c54 removed redundant sensor initialization, added comment 2008-09-14 20:47:30 +00:00
adamdunkels 0f82635dc9 Bugfix: avoid overflowing the event queue 2008-08-15 19:54:58 +00:00
adamdunkels 35d85897b9 Minor bugfix: the printf() must include the n 2008-08-15 19:34:07 +00:00
nvt-se deefb97c16 Changed clock value so it is a power of two. 2008-08-14 11:11:34 +00:00
matsutsuka 6c9291f38b Removed dependency of Cygwin from hexameter. 2008-07-20 07:44:39 +00:00
oliverschmidt f822ac9797 Added clock_seconds() implementation. 2008-07-12 14:44:37 +00:00
nvt-se 2b68f88e77 moved platform independent definitions 2008-07-11 21:39:26 +00:00
nvt-se e757cae8ea removed obsolete definition 2008-07-11 21:36:45 +00:00
nvt-se e8a85b3726 moved platform independent code to the right place 2008-07-11 21:35:10 +00:00
nifi 9952ee8f26 Ported Coffee to the ESB platform 2008-07-11 15:27:57 +00:00
adamdunkels b18b84bb0e Added clock_seconds implementation to minimal-net port 2008-07-10 17:10:39 +00:00
adamdunkels a8f2e8ca48 Added clock_seconds implementation to win32 port 2008-07-10 17:08:54 +00:00
adamdunkels 6bfe18bce1 Changed startup message 2008-07-09 20:58:25 +00:00
nifi 0d87322a18 minor documentation update and removed unused function prototypes 2008-07-09 20:45:06 +00:00
adamdunkels 710f9cf54b Removed debug printout 2008-07-09 09:37:50 +00:00
adamdunkels 2023a692d4 Added clock_second() implementation to make th shell work 2008-07-09 09:34:29 +00:00
nifi f93f501a4d updated tr1001_send and tr1001_read to match radio driver api 2008-07-08 13:22:31 +00:00
nifi 8718c41945 Fixed compiler warning. 2008-07-08 12:35:05 +00:00
nifi 8db3671d65 - Replaced TR1001 statistics with rimestats 
- Fixed typo in constant name
- Changed all occurences of u8_t and u16_t to uint8_t and uint16_t
 2008-07-08 12:27:22 +00:00
nifi 6e657ad3d8 Moved old Makefile from platform/esb to backyard/platform/esb 2008-07-08 11:21:51 +00:00
nifi 16f7888b52 changed clock resolution to 64 (needs to be a power of 2) and updated uIP settings 2008-07-08 09:36:48 +00:00
adamdunkels 8e5d255b5b Moved initialization of the SHT11 until after other initialization: this seems to fix a bug where the SHT11 temperature and humidity values started varying wildly. 2008-07-08 08:23:24 +00:00
adamdunkels 84e4bf7a15 Changed order of initialization to make light sensors work again: a previous change to irq.c seems to have conflicted with light sensor initialization 2008-07-07 23:44:58 +00:00
oliverschmidt 9ac4123f00 Adjusted VC++ project file to recent change regarding cfs implementation (and added preprocessor define _CRT_NONSTDC_NO_DEPRECATE). 2008-07-06 11:06:14 +00:00
oliverschmidt 9d5ae4864e Added preprocessor define _CRT_NONSTDC_NO_DEPRECATE to allow usage of open(), close(), read(), write() and lseek(). 2008-07-06 11:04:33 +00:00
oliverschmidt c60e91bf59 Moved Win32 cfs directory functions from cfs-win32.c to cfs-win32-dir.c. 2008-07-06 10:24:38 +00:00
oliverschmidt bf3c92e98c Leverage split of cfs-posix and cfs-posix-dir by reusing cfs-posix for win32 and replacing only cfs-posix-dir with cfs-win32-dir. 2008-07-06 08:29:37 +00:00
oliverschmidt 86bd7e9829 Added lseek dummy. 2008-07-06 07:34:34 +00:00
oliverschmidt fa956117f7 Dummies should rather return errors. 2008-07-06 07:32:20 +00:00
oliverschmidt c00de08dec Added lseek dummy. 2008-07-06 07:28:42 +00:00
nvt-se 133a314b1c energest.h moved to sys/ 2008-07-04 02:58:58 +00:00
adamdunkels 64b6663b11 moved energest from lib/ to sys/ 2008-07-03 23:59:20 +00:00
adamdunkels c6579d4f08 CFS Coffee arch file for the native platform 2008-07-03 23:13:55 +00:00
adamdunkels 51f4ab8b2c Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long 2008-07-03 23:12:10 +00:00
adamdunkels 84a42a0bb3 xmem implementation for the native platform 2008-07-03 23:11:27 +00:00
matsutsuka 28bcff539f path misconfiguration has been fixed 2008-07-02 15:04:07 +00:00
matsutsuka 4cf1687845 shell is removed temporarily since it doesn't work in the current version. 2008-07-02 15:03:44 +00:00
adamdunkels 28331191b3 Changed name of simple-cc2420 to cc2420 2008-07-02 09:38:06 +00:00
adamdunkels 66876625d4 Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*. 2008-07-02 09:05:40 +00:00
adamdunkels dafa1d89a2 Added cc2420-aes.c (functions for interfacing the build-in AES support of the CC2420) 2008-07-02 08:47:05 +00:00
matsutsuka 4ecebdd842 A binary conversion tool has been modified to support variations. 2008-07-02 07:17:14 +00:00
adamdunkels 1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
oliverschmidt c2bec97eef Added some info on the Apple2 PFS (and AppleCommander). 2008-06-12 22:45:17 +00:00
oliverschmidt 433518c3cb Just some minor reformatting. 2008-06-12 22:16:50 +00:00
nvt-se f83000af8a clear bit when uart edge is set. 2008-05-29 22:06:18 +00:00
nvt-se 36fec8dd01 moved sdspi.c to the sd file list. 2008-05-29 22:04:30 +00:00
adamdunkels d134a1fcb1 Moved sky-specific make targets from the tools/sky/Makefile to the more natural platform/sky/Makefile.sky. Added a number of convenient targets for accessing the serial port. 2008-05-29 20:15:49 +00:00
nvt-se 44c93fcd93 cleared lock semantics 2008-05-28 13:17:08 +00:00
adamdunkels 7ca33e2285 Reverted inadvertedly committed change to lpp instead of nullmac 2008-05-27 19:07:20 +00:00
nvt-se fed62e1642 added timeout 2008-05-27 14:22:55 +00:00
nvt-se 07f8875963 added missing header 2008-05-27 14:05:09 +00:00
nvt-se f2c6f77f7d removed debug print 2008-05-27 14:04:15 +00:00
adamdunkels 1263eb8455 Moved old unused files to backyard 2008-05-27 13:16:34 +00:00
nvt-se ce84dce702 reset locks on forced mode switch 2008-05-27 13:05:52 +00:00
nvt-se 9c9c2573c3 lock UART for RS232 in putchar 2008-05-27 13:03:19 +00:00
nvt-se bff587e32c lock SPI bus when erasing 2008-05-27 13:01:27 +00:00
nvt-se a26bcf30f7 added SPI parameters. 2008-05-27 12:25:48 +00:00
oliverschmidt 2ede893aa6 The feature set of gnumake is really frightening: This time I discovered 'target-specific variable values'... 2008-05-26 11:26:57 +00:00
oliverschmidt f74503c23c Replace non-fully-functional hack with the new gnumake variable CONTIKI_PROJECT. 2008-05-26 10:13:32 +00:00
oliverschmidt 356f5cfa04 The recent optimizations (usage of language card bank2 through new C-library, logging through ROM routine, removal of unused IP forwarding code) allowed to increase the number of concurrent HTTP conntections from 3 to 7 :-) 2008-05-23 23:13:41 +00:00
oliverschmidt a78a7dedbc Added make target 'disk' for creating a .dsk disk image using AppleCommander. 2008-05-22 22:21:43 +00:00
oliverschmidt 7120cf4404 Added make target 'disk' for creating a .d71 disk image using c1541. 2008-05-22 22:19:30 +00:00
oliverschmidt dc63b33956 Added make target 'disk' for creating a .d64 disk image using c1541. 2008-05-22 22:18:25 +00:00
oliverschmidt cd1608aa08 Activate uIP forwarding support. 2008-05-22 19:49:48 +00:00
oliverschmidt e914302e94 Removed check already done in Makefile.include. 2008-05-22 19:45:47 +00:00
oliverschmidt b750e8cc42 Moved platform/c64/contiki.cfg to tools/c64/sample.cfg 2008-05-21 08:13:04 +00:00
oliverschmidt 5dba39fab1 Moved platform/c128/contiki.cfg to tools/c128/sample.cfg 2008-05-21 08:09:46 +00:00
oliverschmidt a341f981aa Moved platform/apple2enh/contiki.cfg to tools/apple2enh/sample.cfg 2008-05-21 07:59:43 +00:00
adamdunkels 8b4179cf45 Moved ctimer_init() so that MAC protocols can use ctimers in their initialization code 2008-05-19 12:07:49 +00:00
adamdunkels 7aa8508e0b Added display of radio status: a green ring appears around nodes with their radio turned on. Added a command that prints out a .fig file that shows the current network setup (press the 'd' key). 2008-05-14 19:22:57 +00:00
adamdunkels 31ea41d8db Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level 2008-05-14 19:19:28 +00:00
nvt-se 776f377a69 Configuration for the Sky platform. 2008-04-28 10:34:33 +00:00
joxe 7be3aeeeb5 added sampling mode in sound sensor 2008-04-25 15:55:37 +00:00
fros4943 c4df31376e cooja hello world (+ include printf2log.h) 2008-04-22 13:07:49 +00:00
nvt-se 73978e3133 only include sdspi.h if WITH_SDC is on. 2008-03-31 14:33:23 +00:00
nvt-se acf01a0c58 fixed compilation error. 2008-03-31 14:32:00 +00:00
nifi f916c7b130 initialize ctimer after initialization of process 2008-03-31 14:01:26 +00:00
nvt-se 067e4c3c06 include contiki-conf.h for type definitions. 2008-03-31 13:48:03 +00:00
nvt-se f7b3d9fc99 moved files to sd/ 2008-03-31 13:45:52 +00:00
nvt-se fdcc145150 added missing file. 2008-03-31 13:43:34 +00:00
nvt-se 2822ff7ddb made more conform with contiki indentation. 2008-03-28 23:03:05 +00:00
nvt-se 10cabda581 lock wait function from Michael Baar. 2008-03-28 16:06:28 +00:00
nvt-se bd8809d35d print information about the SD card, if existent. 2008-03-28 16:02:01 +00:00
nvt-se 6486460e3f locking bugfix from Michael Baar. 2008-03-28 15:59:58 +00:00
nvt-se 3fec8ee5e7 synced with newer version by Michael Baar. 2008-03-28 15:58:43 +00:00
nvt-se d5c8b18fc2 added accelerometer test with moving average. 2008-03-27 13:08:35 +00:00
nvt-se 5631c92416 use three different input channels for the accelerometer. 2008-03-27 13:04:59 +00:00
oliverschmidt 85edbc01db Starting with the cc65-snapshot-2.11.9.20080316 the Apple2 C-library supports placing code in the Apple2 Language Card by choosing the code segment 'HIGHCODE'. By default the memory area 0xD400 - 0xE000 is used for HIGHCODE. If the application doesn't need the ProDOS 8 QUIT code then the memory area used for HIGHCODE may be extended to 0xD000 - 0xE000. 
Contiki now leverages that feature to place process.o, etimer.o and uip_arp.o in HIGHCODE. These files were carefully chosen as:
- they are necessary for all Ethernet apps
- their size doesn't depend on configuration macros
- they fill the available space nicely (with a little reserve for changes in the source or the compiler)
 2008-03-24 22:49:00 +00:00
fros4943 b5d09f3822 set default radio channel: 26 
same as sky platform
 2008-03-18 16:22:00 +00:00
fros4943 660bc5e991 changed ss values + added configurable csma mac 2008-03-17 09:48:00 +00:00
nifi ddcda4582e ctimer initialized by contiki-esb-main 2008-03-13 15:59:43 +00:00
nifi 3ecd955f01 energest needs to be initialized before network 2008-03-13 15:58:44 +00:00
nifi 79cb912f7c reduced memory usage, removed procinit, general cleanup of initialization, enabled watchdog 2008-03-07 17:54:22 +00:00
oliverschmidt 9071007e1e For the Win32 platform build we need to define AUTOSTART_ENABLE even for the Contiki library files to be able to autostart the program handler. 
Note: For this to work the program handler needs to be the first autostart enabled application in the Contiki library. As the GNU archiver guarantees to preserve the order of the object files in a library this can be accomplished by having the program handler the first item in APPS.
 2008-03-04 22:55:54 +00:00
adamdunkels c38d43c387 Change order of initialization so that Rime is initialized before uIP-over-Rime. Send out a new gateway command if a spurious (erroneous) gateway command is received. (Note for the future: this will cause a ping-pong problem with two correct gateways in the network; need to come up with a better solution for this.) 2008-03-03 20:23:53 +00:00
adamdunkels 136443a387 Print out interface address 2008-03-03 20:21:59 +00:00
oliverschmidt 8a4890c9e5 Free up unused file descriptors. 2008-02-28 21:56:47 +00:00
oliverschmidt 368d389970 Free up unused file descriptors. 2008-02-28 21:36:37 +00:00
nvt-se 1d3bae48dd added sd card support. 2008-02-28 15:49:01 +00:00
nvt-se 2cc0135e35 cleaned up and fixed an error checking problem in the locking code. 2008-02-28 15:11:22 +00:00
fros4943 3b5fa2d8e5 added 5 second delay before actually burning the node id (may otherwise cause problems with the .upload script) 2008-02-25 16:34:56 +00:00
adamdunkels 412facb831 This is an initial commit of an implementation of the Chameleon 
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.

The details are in our SenSys 2007 paper:

Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.

http://www.sics.se/~adam/dunkels07adaptive.pdf

This is a rewrite of the code that was developed for the paper.
 2008-02-25 02:14:34 +00:00
adamdunkels 9c57e5e272 Moved old Makefile (non-working) from platform/sky to backyard/platform/sky 2008-02-24 22:22:17 +00:00
adamdunkels 307fc41646 Detect if node is attached to a SLIP line to set node to become the network's gateway 2008-02-24 21:13:03 +00:00
adamdunkels 5bcd0ab60b Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol 2008-02-24 21:11:35 +00:00
oliverschmidt d74fd06536 Now that process initialization has been changed (back) to synchronous it needs to be called after reading the config file and setting the mouse sprite in order to preserve the existing logic. 2008-02-17 14:12:52 +00:00