adamdunkels
f634ccfb3d
Set transmission power based on packet attribute
2009-03-11 20:38:53 +00:00
adamdunkels
57b9cab27e
Set RSSI, correlation, and timestamp as packet attributes for incoming packets
2009-03-02 21:59:01 +00:00
nifi
dee785ae88
added configuration of checksum and timesynch
2009-02-25 21:21:06 +00:00
adamdunkels
6a460fecdd
There is problem with the CC2420 driver: under high traffic load the packets often get mangled in the receive FIFO. Not sure why this happens or how to best prevent it. As a temporary workaround, I've added an additional CRC16 check to the incoming packets. This eats two bytes from each packet, but at least protects against the erroneous packets we've seen quite a few of lately. The reception code was also cleaned up, which resulted in a smaller code size.
2008-08-26 21:44:03 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
39abed8672
Moved old CC2420 driver to the backyard
2008-02-24 22:29:08 +00:00
bg-
70ddc0f27e
* If we detect a RXFIFO overflow schedule a poll of the device driver.
2007-07-30 14:54:49 +00:00
bg-
8f0d9aab89
* Change max life of neigbour entries from 60 to 30 seconds by
...
changing the time unit (quanta) from 4 to 2 seconds.
2007-06-28 15:08:53 +00:00
bg-
08d547780c
* Some extra delay when broadcasting to break potential symmetries.
2007-06-01 14:37:02 +00:00
bg-
81b684414d
* Changed implementation for dealing with retransmissions to be
...
strictly event driven. The old implementation was rather process
like and the new one is still implemented as a process.
2007-05-31 10:15:57 +00:00
bg-
1009c3fabf
* Literal constants REMOTE_*.
2007-05-21 14:24:51 +00:00
bg-
34b1d02607
* Need to track if this was the incoming interface.
2007-05-08 08:27:34 +00:00
bg-
536703d0a2
* Check in with debug off!
2007-05-07 12:02:14 +00:00
bg-
d34db6ee92
* Change retransmission scheme both for unicasts and for
...
broadcasts. Only count retransmissions that actually caused
transmission (according to the hardware).
2007-05-07 12:01:32 +00:00
bg-
83f2b1da00
* Use uip_fw return codes.
...
* Use unicast retransmission scheme also for broadcasts.
2007-05-02 14:51:20 +00:00
bg-
e7d7e31bc9
* Better management of "DATA ACK"s.
2007-04-30 09:41:42 +00:00
bg-
478953dcf4
* Randomised backoff when broadcasting.
...
* Only warn about rxfifo overflows when sending.
* More intricate tests to verify if transmission really started.
2007-04-04 11:46:10 +00:00
bg-
95164eb39f
* Perform RXFIFO overflow check as late as possible when sending.
2007-02-01 14:00:27 +00:00
bg-
2a879202a2
* Initial AVR port.
...
* Check for RXFIFO overflow before sending.
* Fix in loop that waits for SFD start.
2007-01-24 16:26:55 +00:00
bg-
29572668ac
* Typo in comment.
2006-12-20 13:42:55 +00:00
bg-
5d970109c8
* If broadcast transmission never starts, retry with (nearly)
...
exponential backoff.
* Fine-tune check for transmission start.
2006-12-01 15:04:04 +00:00
bg-
f3a6cee55b
* Oops, some machine dependent changes was accidentally committed.
2006-11-17 13:03:51 +00:00
bg-
27e531baad
* Set CC2420_RXCTRL1.RXBPF_LOCUR=1 as recommended in data sheet.
...
* Use PRINTF to disable debug printfs.
2006-11-17 12:27:23 +00:00
bg-
5dacf0be11
Move misc. routines to new file.
2006-08-09 17:39:39 +00:00
bg-
fb94d50410
Change typedef of uip_ipaddr_t from a vector type to a union.
...
typedef union uip_ip4addr_t {
u16_t u16[2];
u8_t u8[4];
} uip_ip4addr_t;
typedef uip_ip4addr_t uip_ipaddr_t;
This implies that one must consistently pass pointers to
uip_ipaddr_t:s and not mix and match pointers with
uip_ipaddr_t:s as was done earlier.
2006-08-09 16:13:39 +00:00
bg-
4eee7b8bf4
Slightly outdated versions were imported to sf.
2006-08-02 14:33:36 +00:00
adamdunkels
c9e808d638
Import of the contiki-2.x development code from the SICS internal CVS server
2006-06-17 22:41:10 +00:00
