Commit graph

137 commits

Author SHA1 Message Date
Adam Dunkels 2af2478166 A set of RPL regression tests that the RPL network is able to survive the replacement of one node. The different tests test different placements of the moving node, with a varying number of hops from the root 2013-08-19 17:48:33 +02:00
Adam Dunkels 4cfefe80e4 A RPL regression test that tests that the network survives a random rearrangement 2013-08-19 17:48:33 +02:00
Adam Dunkels 241a4e0100 A RPL regression test that tests that a RPL network survives a temporary root loss 2013-08-19 17:48:33 +02:00
Adam Dunkels 6d386ffc8d A RPL regression test that tests DAO routes going towards the sink and then down 2013-08-19 17:48:32 +02:00
Adam Dunkels b1e6890b32 Re-enabled the large network RPL test 2013-08-19 17:48:32 +02:00
Nicolas Tsiftes fe0a0423cb Merge pull request #330 from adamdunkels/push/faster-collect-lossy
Faster collect-lossy travis test
2013-08-11 07:14:28 -07:00
Adam Dunkels 6e7beb93cb Made it easier to configure how many packets that should be received. Reduced the total amount of packets from 10 to 8 to make the test complete faster. 2013-08-11 15:12:18 +02:00
Adam Dunkels b6770b9de8 Added regression tests that test IPv6 fragmentation 2013-08-11 14:27:21 +02:00
George Oikonomou 3446cee85b Break travis compile tests into smaller builds
* The previous 01-compile test has been renamed to compile-base. It
  now only tests {msp430, avr, native}-based platforms
* New test builds for arm-based and 8051-based ports (one build per arch)
* Only install arm-none-eabi, sdcc and srecord for the builds which need
  them. This will somewhat speed up all other tests
* Test er-rest-example and webserver-ipv6 for the cc2538
* An erroneous comment was fixed and another comment was somewhat
  clarified
2013-08-07 15:00:13 +01:00
George Oikonomou 952607d1b5 Add CC2538 travis compile tests 2013-08-06 21:17:58 +01:00
stefano pascali 36e7db42de Some little refactor 2013-07-19 16:15:55 +02:00
stefano pascali b43ce0f677 Travis-ci tweaks, added CPUREV to 01 regression test, needed by mbxxx platform 2013-07-12 17:07:04 +02:00
Adam Dunkels 4ac7512895 Temporarily disable large RPL network test until we get link-layer ACKs in Cooja 2013-06-20 10:12:54 +02:00
Nicolas Tsiftes 4b80ad9c89 Merge pull request #239 from darconeous/pull-requests/avr-ravenusb-rpl
avr-ravenusb/cdc_task: Fix compile issues.
2013-05-20 04:42:03 -07:00
Robert Quattlebaum 3e0666265d avr-ravenusb/cdc_task: Fix compile issues.
A lot more changes are in the pipeline, but compiling is a good start.
2013-05-19 11:31:01 -07:00
Mariano Alvira f90736e7ed Travis: disable 02-sky-ipv6-udp test b/c it's still flaky even with
the longer test time.
2013-05-19 13:14:56 -04:00
Mariano Alvira e67c07468d Travis: sky-ipv6-udp test needs more time to complete 2013-05-18 18:14:14 -04:00
Mariano Alvira d662279bb4 Travis: disable flaky or failing tests
* disable hello-world of cooja motes b/c it is flaky
* mark 04-sky-shell-download.csc test as failing. Not sure what
the problem is.
2013-05-18 18:14:14 -04:00
Mariano Alvira 585dd3fdbd Travis: The test criteria for this test was too strict --- one or two
packets get lost. Change the test to ensure that data comes back from
every node and we get at least 75 non-duplicate reports.
2013-05-18 18:14:14 -04:00
Mariano Alvira d396832d48 Travis: Run java with -Xshared:on. The previous jvm had shared on by default and cooja
requires this.
2013-05-18 18:14:10 -04:00
Mariano Alvira 1ef6112ac7 Travis: correct the name for the ipv6-apps test (travis.yml had the correct name
--- this is why the test was failing)
2013-05-18 18:11:59 -04:00
Mariano Alvira 3ea8cce948 Travis: Print out logs so that debugging travis is possible. 2013-05-18 18:11:45 -04:00
Robert Quattlebaum 535e90343c Merge pull request #144 from darconeous/pull-requests/settings-for-all-targets
core/lib/settings: Generalized settings manager to work on any platform
2013-05-18 12:03:09 -07:00
Robert Quattlebaum b8c0f2de6c cpu/native: Add file-backed simulated EEPROM to native cpu.
This patch removes a defunct EEPROM implementation from the native
platform and provides a new EEPROM implementation for the native cpu.
The previous implementation appears to be vestigal.

This is useful for testing code which uses the EEPROM without running
the code on the actual hardware.

By default the code will create a new temporary file as the EEPROM
backing, reinitializing each time. If you would like to preserve the
EEPROM contents or specify a specific EEPROM file to use, you can set the
`CONTIKI_EEPROM` environment variable to the name of the EEPROM file you
wish to use instead. If it already exists, its contents will be used.
If it does not already exist, it will be created and initialized by
filling it with `0xFF`---just like a real EEPROM.

A new example is also included, which was used to verify the correctness
of the implementation. It can easily be used to verify the EEPROM
implementations of other targets.
2013-05-18 10:29:41 -07:00
Robert Quattlebaum 28a1e40ebd core/lib/settings: Generalized Settings Manager to work on any platform
This commit moves the Settings Manager from the AVR codebase
into the Contiki core library. Any platform that implements
the Contiki EEPROM API can now use the Settings Manager's
key-value store for storing their persistent configuration info.

The Settings Manager is a EEPROM-based key-value store. Keys
are 16-bit integers and values may be up to 16,383 bytes long.
It is intended to be used to store configuration-related information,
like network settings, radio channels, etc.

 * Robust data format which requires no initialization.
 * Supports multiple values with the same key.
 * Data can be appended without erasing EEPROM.
 * Max size of settings data can be easily increased in the future,
   as long as it doesn't overlap with application data.

The format was inspired by the [OLPC manufacturing data format][].

Since the beginning of EEPROM often contains application-specific
information, the best place to store settings is at the end of EEPROM
(the "top"). Because we are starting at the end of EEPROM, it makes
sense to grow the list of key-value pairs downward, toward the start of
EEPROM.

Each key-value pair is stored in memory in the following format:

Order    | Size     | Name         | Description
--------:|---------:|--------------|-------------------------------
       0 |        2 | `key`        | 16-bit key
      -2 |        1 | `size_check` | One's-complement of next byte
      -3 |   1 or 2 | `size`       | The size of `value`, in bytes
-4 or -5 | variable | `value`      | Value associated with `key`

The end of the key-value pairs is denoted by the first invalid entry.
An invalid entry has any of the following attributes:

 * The `size_check` byte doesn't match the one's compliment of the
   `size` byte (or `size_low` byte).
 * The key has a value of 0x0000.

[OLPC manufacturing data format]: http://wiki.laptop.org/go/Manufacturing_data
2013-03-20 11:57:13 -07:00
Adam Dunkels e9b1374383 Updated paths to relative paths to make it easier to move tests to new directories 2013-03-18 09:07:33 +01:00
Adam Dunkels 49bf7626f1 Split the collect test into collect and collect-lossy to make each individual
travis build complete faster.

Also changed the armgcc download link to a github location.
2013-03-18 09:07:33 +01:00
Robert Quattlebaum f145c17039 core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor.
This patch updates the DNS resolver to support IPv6 and introduces an
improved API for looking up DNS entries. This patch also adds optional
support for mDNS lookups and responses to the DNS resolver.

Here is a quick summary of the changes:

 * Added support for IPv6 lookups.
 * DNS queries now honor record expiration.
 * Added support for mDNS, compatible with "Bonjour".
 * Implemented a new lookup api, `resolv_lookup2()`, which provides
   more information about the state of the record(error, expired,
   looking-up, etc.).

About mDNS/Bonjour Support
--------------------------

This patch adds basic support for mDNS/Bonjour, which allows you to
refer to the name of a device instead of its IP address. This is
incredibly convenient for IPv6 addresses because they tend to be very
long and difficult to remember. It is especially important for
link-local IPv6 addresses, since not all programs support the '%'
notation for indicating a network interface (required on systems with
more than one network interface to disambiguate).

In other words, instead of typing in this:

 * `http://[fe80::58dc:d7ed:a644:628f%en1]/`

You can type this instead:

 * `http://contiki.local/`

Huge improvement, no?

The convenience extends beyond that: this mechanism can be used for
nodes to talk to each other based on their human-readable names instead
of their IPv6 addresses. So instead of a switch on
`aaaa::58dc:d7ed:a644:628f` triggering an actuator on
`aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the
actuator on `living-room-lights.local`.

What you need to do to be able to look up `.local` names on your
workstation depends on a few factors:

 * Your machine needs to be able to send and receive multicast packets
   to and from the LoWPAN. You can do this easily with the Jackdaw
   firmware on an RZUSBStick. If you have a border router, you will need
   it to bridge the mDNS multicast packets across the border.

 * If you are using a Mac, you win. All Apple devices support mDNS
   lookups.

 * If you are using Windows, you can install Apple's Bonjour for Windows
   package. (This may be already installed on your machine if you have
   installed iTunes) After you install this you can easily do `.local`
   lookups.

 * If you are using a Unix machine, you can install Avahi.

The default hostname is set to `contiki.local.`. You can change the
hostname programmatically by calling `resolv_set_hostname()`. You can
change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`.

You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to
`0`.

---------------------------------

core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()`

Note that this patch should fix several `resolv_lookup()` bugs
that already existed. There were many cases where `resolv_lookup()`
was being called and the IP address ignored, but later code
assumed that the IP address had been fetched... ANYWAY, those
should be fixed now.

---------------------------------

examples/udp-ipv6: Updated client to use MDNS to lookup the server.

Also updated the Cooja regression test simulation.
2013-03-10 11:40:08 -07:00
George Oikonomou 02b90c9c63 Added rtests for 8051 ports 2012-12-16 22:21:44 +00:00
Mariano Alvira 911bdd1b77 add a few important econotag compile tests 2012-12-11 12:58:49 -05:00
Mariano Alvira 9f297cdd4e Fix up compile test so that you can do nested subdirectories 2012-12-11 12:58:11 -05:00
Adam Dunkels 0c55037ee8 Regression tests for RPL, Rime trickle, and Rime mesh routing protocols
The RPL tests test up and down routing, root reboots, 28-hour tests, and tests with more nodes than fit the routing tables
2012-12-10 01:50:17 +01:00
Adam Dunkels 15a249fb4a Make IPv6/RPL collect test faster by reducing the number of received packets 2012-12-10 01:50:12 +01:00
Adam Dunkels ccc4b9e37f Make regression tests deterministic by having a constant random seed 2012-12-10 01:50:06 +01:00
Adam Dunkels d917d64cfb Moved the Contiki tests from the tools/cooja directory into the regression-tests/ directory 2012-12-10 01:50:01 +01:00
Adam Dunkels 15d2c10633 Contiki regression tests, grouped into categories 2012-12-10 01:49:55 +01:00
Adam Dunkels 451b18273e The Thingsquare Mist regression test scripts 2012-12-10 01:49:48 +01:00