deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
9278 commits 6 branches 13 tags 80 MiB
Commit graph

2047 commits

Author SHA1 Message Date
Atis Elsts b9e15a5986 Make native platform's main loop less noisy. 2014-04-22 14:38:08 +02:00
Atis Elsts 6ea744421b Initialize the rtimer component on native platform's startup. 
Otherwise applications that use rtimers die when run as native code because of an unhandled signal.
 2014-04-22 14:35:01 +02:00
George Oikonomou 49bf7cc241 Merge pull request #616 from hexluthor/listing 
CC2538: Add a Makefile rule to generate a final assembly listing.
 2014-04-17 22:13:52 +01:00
Benoît Thébaudeau d93d129da6 cc2538: uart: Make it possible to use several UARTs simultaneously 
This avoids the limitation of having a single UART available at runtime, without
duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2014-04-17 18:53:44 +02:00
Ian Martin 23a3a7f004 Add a note about "make cc2538-demo.lst" to the platform README. 2014-04-16 10:47:01 -04:00
Brad Campbell af27d2d252 [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS 
Because the CC2538 has a multi-byte SPI RX FIFO, flushing the buffer
requires more than just a single read. This adds a loop that empties the
entire RX buffer on a FLUSH().

Different SPI chips needs different SPI settings. This commit adds a
function that allows chip drivers to configure the SPI peripheral before
using it.

The frame pin the driver was using as a chip select does not work as
most devices expect it to. It toggles after every byte, and most chips
interpret that as end of message. To make drivers more reliable, each
chip driver should setup a GPIO and assert it as needed.
 2014-04-15 14:07:10 -04:00
George Oikonomou 33abe26ec8 Merge pull request #411 from ADVANSEE/cc2538-adc 
cc2538: Add adc driver and example
 2014-04-13 03:05:12 +01:00
George Oikonomou 22554e6d72 Merge pull request #596 from hexluthor/cc2538-uart-baudrate 
cc2538: Support any UART baudrate.
 2014-04-13 02:51:58 +01:00
Ian Martin 336224633a Eliminate UART_CONF_IBRD and UART_CONF_FBRD. 2014-03-22 10:26:03 -04:00
François Revol 726bdd699a native: Add CTK to the module list 
It is needed for apps compiled WITH_GUI.
 2014-03-21 23:01:02 +01:00
Nicolas Tsiftes b78eb96a54 Merge pull request #590 from g-oikonomou/native-rpl-module 
Include the RPL module for the native platform
 2014-03-18 12:32:56 +01:00
Oliver Schmidt d1d6278f42 Added info on W5100 driver. 2014-03-15 16:56:08 +01:00
George Oikonomou 4704eeb919 Include the RPL module for the native platform 2014-03-09 03:29:43 +00:00
George Oikonomou 6dc9dfa6c2 Merge pull request #551 from JelmerT/feature-cc2538-bsl 
CC2538 serial boot loader python script
 2014-03-09 02:11:36 +00:00
Jelmer Tiete 34e48f4233 Added bootloader backdoor configuration for cc2538DK in contiki-conf.h and selector in startup-gcc.c. Updated Makefile.cc2538dk to support direct uploading. Also updated the platform readme to include the workflow with cc2538-bsl. 2014-03-07 15:44:08 +01:00
Brad Campbell d14f0d5eed CC2538: add secondary location to ieee address 
The CC2538 currently has two addressing options: a hardcoded address set
at compile time or the address stored in primary address section of the
info page. This commit adds the option to choose the secondary location
of the ieee address from the info page, or any memory address.

To use, define `IEEE_ADDR_CONF_USE_SECONDARY_LOCATION` in `project-conf.h`
or similar.

For example:

    #define IEEE_ADDR_CONF_USE_SECONDARY_LOCATION 1
 2014-03-06 10:31:30 -05:00
Oliver Schmidt a1cd642e6e Merge pull request #554 from oliverschmidt/master 
Fixed win32 broken by recent changes.
 2014-02-02 12:10:57 -08:00
Oliver Schmidt 71c671b6cf Fixed win32 broken by recent changes. 2014-02-02 20:19:47 +01:00
George Oikonomou a63376f8be Use -Os for CC2538 builds 
As discussed in #503, -Os was broken with one of the toolchains
recommended in the platform's README and for that reason we were
using -O2 by default.

This commit sets the default to -Os and updates the README to no
longer recommend the toolchain in question
 2014-01-31 20:02:43 +00:00
Adam Dunkels 45265249fc Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
Adam Dunkels 765e9acded Merge pull request #499 from adamdunkels/bold/modularize-everything 
A bold move: modularize everything
 2014-01-29 08:17:10 -08:00
Ian Martin f3cc607101 eval-adf7xxxmb4z: Use the nullrdc driver instead of sicslowmac. 2014-01-26 17:40:31 -05:00
Adam Dunkels 4f498e2eac Updated the include paths to point to the new places 2014-01-26 23:20:47 +01:00
Adam Dunkels 2ec176891f Added the necessary modules to make the eval-adf7xxxmb4z port compile 2014-01-26 23:20:47 +01:00
Adam Dunkels 824d2047da Add the explicit list of modules, since we cannot do auto-dependency management of them 2014-01-26 23:20:47 +01:00
Adam Dunkels fce84c178c Removed unused rime-udp code 2014-01-26 23:20:45 +01:00
Adam Dunkels 8eace27f9b Moved net/rime.h to net/rime/rime.h 2014-01-26 23:20:45 +01:00
Adam Dunkels 1be10f026a Handle the CONTIKI_NO_NET case so that the ravenusbstick example builds 2014-01-26 23:20:42 +01:00
Adam Dunkels 6594873753 Updated the path to uip-debug.h 2014-01-26 23:20:41 +01:00
Adam Dunkels 4c2bd9f120 A set of default modules for the cc253x platform 2014-01-26 23:20:41 +01:00
Adam Dunkels dee654cfe5 Put the cc253x custom makerules in its own customrules file 2014-01-26 23:20:41 +01:00
Adam Dunkels 7846eb2e2f Split the cc2430 custom rules into its own file 2014-01-26 23:20:40 +01:00
Adam Dunkels 36a5aadc9e Moved the 6502 custom rules into its own Makefile.customrules-6502 file 2014-01-26 23:20:40 +01:00
Fredrik Osterlind cf32063c0b introduced optional Makefile.customrules-$(TARGET), to contain custom platform make rules 2014-01-26 23:20:39 +01:00
Adam Dunkels 7a740b382f Moved the individual MODULE definitions from the top-level Makefile.include into the individual platforms' Makefiles 2014-01-26 23:20:36 +01:00
Adam Dunkels 0fe08205e1 Moved the rimeaddr.[ch] code from the core/net/rime module to the core/net module, as it is used not only by rime code 2014-01-26 23:20:36 +01:00
Adam Dunkels b02104e4c4 Add the sht11 device driver module to the z1 platform 2014-01-26 23:20:36 +01:00
Adam Dunkels aaf0f83120 Add cxmac module to the sky platform 2014-01-26 23:20:35 +01:00
Adam Dunkels 9851ff85dd Add a sensible set of modules for the sensinode platform 2014-01-26 23:20:35 +01:00
Adam Dunkels b40f1210e6 Don't use the sicslowmac code, use nullrdc instead 2014-01-26 23:20:34 +01:00
Adam Dunkels e556ecbc25 Don't use the sicslowmac code, use nullrdc instead 2014-01-26 23:20:34 +01:00
Adam Dunkels d7013524f9 Add a sensible set of modules for the micaz platform 2014-01-26 23:20:34 +01:00
Adam Dunkels ee5299fe6e Add a sensible set of modules for the exp5438 platform 2014-01-26 23:20:33 +01:00
Adam Dunkels 51efdd952a Define MODULES for the avr-raven and the avr-ravenusb platforms 2014-01-26 23:20:33 +01:00
Adam Dunkels 34d46fa533 Include driver modules 2014-01-26 23:20:32 +01:00
Adam Dunkels 25367fb08c Moved the ds2411 driver into a dev/ds2411 module 2014-01-26 23:20:31 +01:00
Adam Dunkels c9efe3c3c4 Moved the cc2520 driver into its own dev/cc2520 module 2014-01-26 23:20:31 +01:00
Adam Dunkels 4cfe6c4a5e Moved the sht11 driver to its own module 2014-01-26 23:20:30 +01:00
Adam Dunkels d91bab9104 Include a basic set of modules 2014-01-26 23:20:28 +01:00
Adam Dunkels 0b805e4763 Moved the cc2420 driver into a separate dev/cc2420 module 2014-01-26 23:20:27 +01:00