nvt-se
6005437b27
Disable the watchdog during the whole erase operation.
2008-01-21 10:40:26 +00:00
nvt-se
bed0963769
Call watchdog_periodic before erasing each sector, because this operation
...
takes approximately 1s.
2008-01-21 10:28:44 +00:00
adamdunkels
685de41feb
Fixed buggy build
2008-01-19 06:57:44 +00:00
nifi
3e0e3d4965
added energest-arch.c
2008-01-18 18:26:02 +00:00
adamdunkels
34bd11905c
Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer
2008-01-14 14:50:01 +00:00
adamdunkels
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
adamdunkels
7a356d0fb5
Added support for (simulated) serial data input. Data written to netsim's standard input are now sent as serial data to the main node.
2008-01-14 09:38:16 +00:00
fros4943
4c131d6975
added max printf2log message size
2008-01-11 15:37:38 +00:00
adamdunkels
0cb1efe718
Added cfs-posix
2008-01-08 14:27:28 +00:00
adamdunkels
f935be10c9
Added initalization of the serial library. Changed LPM3 to LPM2 since the current serial driver does not work with LPM3 yet (we need to add start edge detection interrupt support to fix that).
2008-01-08 08:21:03 +00:00
adamdunkels
690805ebe7
Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL
2008-01-08 08:19:56 +00:00
adamdunkels
959c4f3ee2
Removed ENERGEST_CONF_ON which is present in contiki-conf.h anyway
2008-01-08 08:18:00 +00:00
adamdunkels
bd9230b4b3
Added serial input from stdin, removed uIP initialization since uIP is not used anyway, made stdout unbuffered
2008-01-08 08:08:57 +00:00
adamdunkels
b7ab95499f
Added serial and cfs-posix-dir
2008-01-08 08:08:05 +00:00
oliverschmidt
26a554e7c2
Added C128 port. It runs the example webserver both in the cgi and cfs variant - although the latter only with a reduced MTU size due to memory constraints.
2008-01-05 22:30:23 +00:00
oliverschmidt
a9a1a00f27
Moved GTK port to the backyard as it doesn't work for quite some time by now.
2008-01-05 21:06:38 +00:00
oliverschmidt
00d75c8d16
Made use of uip_ipaddr_to_quad().
2008-01-04 23:28:33 +00:00
oliverschmidt
74fc3b4576
Made netsim gateway ip addr on Windows/Cygwin configurable at the command line.
2008-01-04 23:23:29 +00:00
oliverschmidt
5bff4631e4
Minor reformatting.
2008-01-04 23:09:03 +00:00
oliverschmidt
f75d01a428
Log ip addr in the ordinary way.
2008-01-04 22:21:04 +00:00
oliverschmidt
b96c9deebc
Added "usual" comments.
2008-01-04 21:53:32 +00:00
oliverschmidt
bb19396d21
Introduced yet another high-level config macro.
2008-01-01 19:47:03 +00:00
oliverschmidt
852d2c0283
Introduced very lightweight pfs implementation based on Apple ProDOS.
...
ProDOS requires for each opened file a user-supplied page-aligned 1024 byte i/o buffer. This makes the generic POSIX file i/o library contained in the cc65 C-library quite heavyweight.
In contrast the lightweight pfs implementation uses the uIP packet buffer as ProDOS i/o buffer. Therefore:
- Only one file may be open at any time.
- That file may not be open while the uIP packet buffer is used by uIP. The open()/read()/close() sequence should be completed before Contiki event scheduling or inside handling a single Contiki event.
- The uIP packet buffer must be large enough to hold the ProDOS I/O buffer. Depending on the position of the uIP buffer in memory this means between 1024 and 1024 + 256 bytes. Therefore in an Ethernet environment setting the MTU_SIZE to at least 1266 is safe (So the default of 1500 is just fine).
2008-01-01 18:49:50 +00:00
oliverschmidt
69faf1ff4d
Set sprite color.
2007-12-24 15:01:49 +00:00
oliverschmidt
5592b1df6c
Implement cfs API on preprocessor level using POSIX functions..
2007-12-23 15:29:19 +00:00
oliverschmidt
fda38428d9
Introduced some more high-level config macros.
2007-12-23 13:55:38 +00:00
oliverschmidt
14a8cf7200
Made use of the new high-level config macros.
2007-12-23 12:33:57 +00:00
oliverschmidt
125f261b7d
Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios.
2007-12-23 12:32:43 +00:00
oliverschmidt
0564cc50fd
Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all.
2007-12-21 01:36:01 +00:00
oliverschmidt
fe023c6d3e
Introduced very lightweight log implementation not depending on any file I/O library.
2007-12-21 00:43:57 +00:00
oliverschmidt
c36697fca9
Added target-specifc mouse configuration values.
2007-12-20 22:59:41 +00:00
oliverschmidt
e63610e1c9
Added target-specifc mouse support (sprite handling).
2007-12-20 22:54:22 +00:00
oliverschmidt
ff6622310f
Added target-specifc mouse configuration values.
2007-12-20 22:52:18 +00:00
oliverschmidt
eab988e84d
Added target-specifc ctk (and www) configuration values.
2007-12-20 20:54:15 +00:00
nvt-se
f0891be218
added clear channel assessment timeout. long to begin with.
2007-12-20 14:44:31 +00:00
fros4943
d8f6f03edc
moving radio init to init-net files
2007-12-20 13:43:24 +00:00
fros4943
d0997c2dab
major bugfix: padding synch with zero
2007-12-20 13:36:59 +00:00
nvt-se
abb2731ed7
corrected comparison when bits don't need shifting.
2007-12-20 10:48:01 +00:00
nvt-se
7a6a9e62e4
improved logic.
2007-12-19 13:25:41 +00:00
nvt-se
1f00c20815
state variable must be volatile.
2007-12-19 13:09:01 +00:00
oliverschmidt
70fe24817e
Added target-specifc ctk (and www) configuration values.
2007-12-18 17:51:20 +00:00
nvt-se
b4a8641dda
removed printf's.
2007-12-18 15:27:43 +00:00
nvt-se
f9d24f0d24
Wake up from sleep in the interrupt when the receiver process is going
...
to be polled.
2007-12-18 15:26:25 +00:00
fros4943
d21572da02
configurable port
2007-12-18 11:55:01 +00:00
nvt-se
ab115e4b10
Removed deprecated function.
2007-12-17 20:18:29 +00:00
nvt-se
1566f55e04
use smaller payload buffer size and provision for synchronization word in
...
the total buffer.
2007-12-17 20:15:53 +00:00
nvt-se
bcefffb0e7
set ev to valid value.
2007-12-17 18:48:50 +00:00
nvt-se
692da8fd47
swapped the currents for lpm and cpu.
2007-12-17 18:47:17 +00:00
nvt-se
004143b6b8
set rxlen to zero before enabling interrupts.
2007-12-17 16:37:15 +00:00
nvt-se
2288cdecbb
small cleanup.
2007-12-17 16:23:32 +00:00
