Ralf Schlatterbeck
e65dabb119
Add Arduino compatibility layer
...
We can now directly compile arduino sketches (.pde) files.
Arduino compatible analogWrite works now.
But there is still a long way to go, serial I/O and timer stuff (delay,
millis etc) currently don't work (not tested but I don't expect this to
work).
It can be used in an arduino sketch or in a normal contiki program.
We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's
Arduino compatible. If you need different frequencies see native timer
usage in examples/osd/pwm-example
In a contiki program you have to call arduino_pwm_timer_init to
initialize the timer before pwm works. The arduino sketch wrapper
already does this.
For running a sketch, see examples/osd/arduino-sketch
2014-06-26 11:00:01 +02:00
Ralf Schlatterbeck
5991c3e3db
Initial implementation of avr hardware timer
...
Mainly for PWM use for now.
With example to set the LED to different brightness via COAP.
We switch the LED with 50 kHz (20µs) in this example.
2014-06-22 13:32:05 +02:00
Ralf Schlatterbeck
47d1c2a74d
Merge branch 'master' of github.com:osdomotics/osd-contiki
2014-05-29 17:37:00 +02:00
Ralf Schlatterbeck
f48566d51f
Add wallclock time handling
...
New application and new example.
We use the built-in timer routines and add an offset to get the
wallclock time. The offset can be set by time-changing routines
(currently only settimeofday).
We also maintain an offset for timezone handling but this isn't
currently fully implemented.
2014-05-29 17:31:19 +02:00
harald
0c29b2b7db
initial upload
2014-05-27 11:34:10 +02:00
harald
2d424bd259
initial upload
2014-05-27 11:33:10 +02:00
harald
078faa39d4
cleanup code
2014-05-27 11:31:54 +02:00
harald
90ed9d14d2
add Arduino pin definition and commands
2014-05-22 16:25:15 +02:00
Ralf Schlatterbeck
be01bf77a9
Allow changing bootloader_get_mac address
...
Current default in the Makefile is the *new* bootloader address.
But for backward compatibility we've modified the run*.sh files
to use the old address. The run*.sh also now explain how to change
the default.
2014-05-13 16:56:59 +02:00
harald
0a5872e261
change resources to simple and make climate2 default
2014-05-08 13:04:27 +02:00
harald
5fcac26e80
get s/button ->show button status 0/1
2014-04-30 15:20:25 +02:00
harald
40bd9950d1
add 0.5s delay between off and on
2014-04-24 13:55:21 +02:00
harald
59bd18df7d
add timer and shutter functionality
2014-04-23 16:13:58 +02:00
harald
598a0da30d
change to port F6,F7
2014-04-23 16:13:23 +02:00
harald
ac79f1b596
change battery and cpttem format to xx.xx
2014-04-16 09:31:48 +02:00
harald
b0c8597dbc
add shutter control resources, reset,timer
2014-04-15 17:29:05 +02:00
harald
b6e0ef1d95
add contiki led, remove led1,led2
2014-04-15 07:27:33 +02:00
harald
f77717158d
simplify project-conf.h
2014-04-15 07:27:33 +02:00
harald
f9d67ed10c
bugfix statusled include
2014-04-15 07:27:33 +02:00
harald
f40bf6d803
bugfix includes and names
2014-04-15 07:27:33 +02:00
harald
67dba47c23
remove not needed binary files
2014-04-15 07:27:33 +02:00
harald
aa568a28a3
add /s/cputemp resource
2014-04-15 07:27:32 +02:00
harald
f9abb44d6e
add /p/name and p/model resource, remove info
2014-04-15 07:27:32 +02:00
Marcus Priesch
992e54fe25
Factored to support configurable amount of pwm's, fixes
2014-04-15 07:27:32 +02:00
Marcus Priesch
bf6f388691
initial check in
2014-04-15 07:27:32 +02:00
harald
67783600aa
compile all osd-examples
2014-04-15 07:27:32 +02:00
harald
251abdda29
simplified led resource to one led actuator
2014-04-15 07:27:32 +02:00
harald
d87287b745
initial upload
2014-04-15 07:27:32 +02:00
harald
d8d0a507e1
remove link status and bugfix params.c
2014-04-15 07:27:32 +02:00
harald
11b7022ce6
add patch milligrad ds1820 from Jan-Benedict Glaw
2014-04-15 07:27:32 +02:00
harald
87028c1f60
temp and hum sensors values xxxx -> xx.xx
2014-04-15 07:27:32 +02:00
harald
f8c298a495
add dhtxx temp coap
2014-04-15 07:27:32 +02:00
harald
51f179eacf
config panid over defines
2014-04-15 07:27:32 +02:00
harald
1f586c7735
define new tria pins, configurable type ligt or shutter or plug
2014-04-15 07:27:32 +02:00
harald42
7d354d8a37
initial upload
2014-04-15 07:27:32 +02:00
harald42
2ddd2ba38a
cleanup code add coap13 support
2014-04-15 07:27:32 +02:00
harald42
806de3f204
cleanup code, add coap13 support
2014-04-15 07:27:32 +02:00
harald42
15167d541e
del unused files
2014-04-15 07:27:31 +02:00
harald42
39a830d9a9
del unused file
2014-04-15 07:27:31 +02:00
harald42
116ce888c4
code cleanup
2014-04-15 07:27:31 +02:00
harald42
184dee491e
cleanup code
2014-04-15 07:27:31 +02:00
harald42
4f05557905
remove old project use climate instead
2014-04-15 07:27:31 +02:00
harald42
1b56526fe0
delete old example
2014-04-15 07:27:31 +02:00
harald42
aac4fcc8e1
cleanup code
2014-04-15 07:27:31 +02:00
harald42
3c0908f2da
cleanup code
2014-04-15 07:27:31 +02:00
harald42
d3eb7da297
20 neighbors with status and routes
2014-04-15 07:27:31 +02:00
harald42
0a14fd6a18
update boarder router to new rpl tables
2014-04-15 07:27:31 +02:00
harald42
da39da39dc
initial upload
2014-04-15 07:27:31 +02:00
harald42
afa20ee0ae
cleanup plattform defines, disable energest, radiostatistics
2014-04-15 07:27:31 +02:00
harald42
7b46026b52
bugfix RH03 sensor
2014-04-15 07:27:31 +02:00
