Commit graph

473 commits

Author SHA1 Message Date
nifi f0e56df2eb fixed compiler warning when timesynch is disabled 2009-03-17 09:57:01 +00:00
nvt-se 13b364bcc1 fixed documentation typos. 2009-03-15 20:29:04 +00:00
nvt-se 41ca9516a7 fixed documentation typos. 2009-03-15 20:21:16 +00:00
adamdunkels fb8fab739a Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 23:04:52 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
adamdunkels 537219bf27 Added a packet attribute to specify transmission power on outgoing packets 2009-03-11 20:33:17 +00:00
zhitao f304941ab4 raise busy forwarding flag before sending 2009-03-10 14:07:41 +00:00
julienabeille 2a173b465a more printing in debug mode 2009-03-10 08:00:59 +00:00
zhitao 1eb085834f Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes. 2009-03-09 12:54:27 +00:00
adamdunkels a1260c0c1f Documentation updates 2009-03-08 21:43:24 +00:00
adamdunkels 366ad7bece Added Rime documentation from the Rime/Chameleon paper (SenSys 2007) 2009-03-07 11:15:46 +00:00
zhitao 0a12098bd5 avoid ping pong packets during route disruption 2009-03-06 17:33:59 +00:00
adamdunkels dc7491f810 Bugfix and optimization: X-MAC did not properly switch the radio off after sending a packet, resulting in increased power consumption. For packets that require an ACK, we can let the radio be on in anticipation of the ACK (controlled with an WITH_ACK_OPTIMIZATION option) 2009-03-05 19:37:52 +00:00
zhitao 64badeb282 bugfix: use memcpy() to get attributes longer than a byte properly written to packet header 2009-03-05 13:51:28 +00:00
zhitao 08b2315f41 bugfix: put up busy forwarding flag only after next hop found 2009-03-04 08:59:32 +00:00
fros4943 f701615afa bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver.
+ added function for checking if runicast is currently transmitting (non-acked) data
2009-03-03 12:19:46 +00:00
adamdunkels 9816f49fe6 Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy 2009-03-02 22:00:41 +00:00
adamdunkels 78591a003f Minor documentation update 2009-03-02 21:56:16 +00:00
adamdunkels 45e32894a0 Bugfix: backwards definition of MIN macro (quite embarassing) 2009-03-02 11:22:09 +00:00
adamdunkels d813d343c5 Cleaned up old left-over code 2009-03-01 20:38:57 +00:00
adamdunkels 7010eb84b8 Added support for communication power accounting. Energy is attributed to idle listening when the radio is switched off. Enegrgy is attributed to an incoming packet when it is received. Energy is attributed to an outgoing packet when it is transmitted. 2009-03-01 20:37:16 +00:00
adamdunkels aa2f7a3399 Made polite announcement times configurable, added missing right-brace 2009-03-01 10:43:57 +00:00
adamdunkels 3adf8e5807 Call output packet sniffers after the MAC has sent the packet 2009-03-01 10:29:50 +00:00
oliverschmidt bc3d9d2e3c Minor rearrangement. 2009-02-28 11:57:46 +00:00
julienabeille f95c5df7d9 The global prefixes processed must be one less than the total amount of prefixes, as the link local one occupies one slot 2009-02-25 08:35:52 +00:00
adamdunkels 2aedc8490d Compile only if timesynch is enabled 2009-02-20 21:23:22 +00:00
adamdunkels e6907a1d8b Include random.h 2009-02-20 21:22:39 +00:00
adamdunkels 4ec5167276 Rewrote the tcpip_output() and tcpip_set_outputfunc() so that the latter is a proper function (which simplifies debugging) and so that tcpip_output() checks if the output callback function is NULL before calling it 2009-02-20 21:21:56 +00:00
julienabeille 10deaa6fc6 Removed CLOCK_SECOND from stimers in uIPv6, stimers are already in seconds 2009-02-20 07:59:35 +00:00
julienabeille 710e5c621c changed timer to stimer for neighbor, prefix, default router, address list 2009-02-19 16:42:41 +00:00
fros4943 97f76126e6 remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course) 2009-02-17 12:40:18 +00:00
c_oflynn 8516626703 Fixed documentation error (thanks to David Kopf) 2009-02-17 01:28:28 +00:00
adamdunkels 36bb3ece64 If no neighbor is found, we listen for announcements. Cleaned up debug output. 2009-02-16 01:18:53 +00:00
adamdunkels aaa8c9d2c9 Construct the X-MAC header on the stack instead of directly in the packet header, because the packet header may be misaligned. A bit of cleanup in the code too. 2009-02-15 22:05:06 +00:00
adamdunkels e4b1ff461e Added MAC-layer announcement beacons to X-MAC. Configuratble through XMAC_CONF_ANNOUNCEMENTS 2009-02-14 20:35:03 +00:00
adamdunkels 585620c102 Reverted the recent change from random_rand() to rand(). It turned out that
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels 9d75781a78 Added packet attributes for energy spent on a packet (RIMEBUF_ATTR_LISTEN_ENERGY and RIMEBUF_ATTR_TRANSMIT_ENERGY) 2009-02-10 23:51:12 +00:00
adamdunkels b15198b9a8 Bugfix: the Chameleon header parser modules should not clear the packet attributes, because the MAC or radio layers may have added attributes already 2009-02-10 23:49:58 +00:00
adamdunkels e1ef13dad6 Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...) 2009-02-10 00:44:50 +00:00
adamdunkels 6c95bd895a Added default initialization of polite announcements. Not sure where the best place for this is, but this at least allow us to start experimenting with this. 2009-02-09 22:05:33 +00:00
adamdunkels 3efb83c338 Added announcement includes 2009-02-09 21:09:42 +00:00
adamdunkels 0de445e035 Initialize the announcement module 2009-02-09 21:08:12 +00:00
adamdunkels 3670ef2f44 Rewrote the collect module so that it uses the announcement module rather than the neighbor-discovery module. This makes it possible to implement other annoumcement back-ends than the traditional broadcast-based neighbor discovery 2009-02-09 20:58:25 +00:00
adamdunkels dd9ffd87c4 Added missing #include announcement.h 2009-02-08 20:14:18 +00:00
adamdunkels 085df6b630 Improved version of LPP with support for broadcasts as well as announcement data in the probes 2009-02-08 19:30:18 +00:00
adamdunkels 91d280c4c9 Reverted to the old behaviour on broadcasts: send strobes for both unicast and broadcast packets. 2009-02-07 18:45:50 +00:00
adamdunkels 4b71003c2f Changed from random_rand() to rand() for better pseudo randomness 2009-02-07 18:43:45 +00:00
adamdunkels 752291f450 Changed from random_rand() to rand() function for (pseudo) random numbers because random_rand() does not work that well 2009-02-07 16:16:31 +00:00
adamdunkels 91e8487032 Added Doxygen documentation 2009-02-07 16:15:37 +00:00
adamdunkels be846d8c90 A new experimental network primitive called an 'announcement'. An
announcement is an (ID, value) tuple that is disseminated to local
area neighbors. An application or protocol can explicitly listen to
announcements from neighbors. When an announcement is heard, a
callback is invoked.

Announcements can be used for a variety of network mechanisms such as
neighbor discovery, node-level service discovery, or routing metric
dissemination.

Application programs and protocols register announcements with the
announcement module. An announcement back-end, implemented by the
system, takes care of sending out announcements over the radio, as
well as collecting announcements heard from neighbors.
2009-02-05 19:32:01 +00:00