George Oikonomou
cb075dec65
Disable SDCC warnings 110 and 126
...
Those two warnings are optimisation-related
* 110 warns that an always-false if branch has been optimised out
* 126 warns about unreachable code which also gets optimised out
In disabling those warnings, we make the build less cluttered
2013-08-09 15:57:49 +01:00
George Oikonomou
20f06e3271
Support verbosity control for 8051-based platforms
2013-08-09 15:57:21 +01:00
George Oikonomou
c89450a233
Change to sdar from the now deprecated sdcclib
2013-08-09 15:56:16 +01:00
George Oikonomou
b025759665
Don't redirect sdld output to dev/null
...
This was used in the past because sdld was
very verbose when linking banked hex files. New
sdld versions do not exhibit this level of
verbosity and therefore the redirect can be
stopped
2013-08-09 15:56:15 +01:00
George Oikonomou
cdba557e5e
Don't build the Sensinode UDP server as RPL root
...
The Sensinode UDP-IPv6 example used to build the
UDP server to act as RPL root by default. This now
changes, the server is a simple router. Support to
build the server as RPL root is still there, it's
just the default that changes
2013-08-09 15:53:57 +01:00
George Oikonomou
f30d92b101
Change the way we switch between cc2530 models
...
The switch is now performed through a configuration define,
which has also been renamed to better match Contiki's naming
conventions
2013-08-09 15:53:23 +01:00
George Oikonomou
1b0470687b
Change the cc2531 usb stick descriptor
...
The CC2531 USB stick now identifies itself as a
'Texas Instruments CC2531 USB Dongle' and uses a
TI-assigmed VID:PID. The VID:PID is now configurable
in contiki- or project-conf.h
2013-08-09 15:51:58 +01:00
George Oikonomou
0614c4e720
No longer build rpl-of0 for Sensinodes
2013-08-09 15:50:47 +01:00
George Oikonomou
6a79ac3b2d
Increase 8051 plaform configurability
2013-08-09 15:50:47 +01:00
George Oikonomou
70d8bd71df
Disable example-defined putchar for 8051 platforms
2013-08-09 15:50:47 +01:00
George Oikonomou
ecf8ca55ef
Move SLIP interface define to project-conf
2013-08-09 15:50:47 +01:00
George Oikonomou
fa166116b7
Auto-enable SLIP for 8051-based platforms
2013-08-09 15:50:47 +01:00
George Oikonomou
0a7094bc39
Remove leftover make targets
...
The sensinode platform does not support .upload and .serialdump
Their presence in the makefile has confused in the past confused
some users. This commit removes them
The commit also removes the $(OBJECTDIR)/%.rel: %.cS recipe which
is not used by either 8051 platform and is probably broken anyway,
since it has been unmaintained for years
2013-08-09 15:48:05 +01:00
George Oikonomou
6c6013b898
Make the CC2538 UART driver more configurable
...
* We can now very easily switch between UART0 and UART1 through a define
* We can also configure the UART RX and TX port/pin through defines
2013-08-09 12:20:25 +01:00
Adam Dunkels
1f76b7d0f9
Merge pull request #323 from g-oikonomou/smaller-travis-builds
...
Travis: Multiple Smaller Compile Builds and a Fix
2013-08-07 11:45:16 -07:00
Adam Dunkels
598228cfb1
Merge pull request #324 from g-oikonomou/cc2538-gitignore
...
gitignore CC2538dk firmwares
2013-08-07 08:26:10 -07:00
Adam Dunkels
8c5c82edb8
Merge pull request #327 from g-oikonomou/cc2538-build-verbosity
...
Add support for verbosity control
2013-08-07 08:25:49 -07:00
Adam Dunkels
70eb439a88
Merge pull request #325 from g-oikonomou/cc2538-tools-release
...
CC2538 IEEE address and README updates
2013-08-07 08:25:30 -07:00
Adam Dunkels
967734f2d8
Merge pull request #326 from g-oikonomou/cc2538-contikimac
...
Adjust a config define to its new name
2013-08-07 08:24:30 -07:00
George Oikonomou
f48add46aa
gitignore CC2538dk firmwares
2013-08-07 15:29:53 +01:00
George Oikonomou
81318909e0
Read IEEE address from InfoPage by default
2013-08-07 15:28:33 +01:00
George Oikonomou
6b01b36cc9
Update readme references and tool download URLs
2013-08-07 15:28:04 +01:00
George Oikonomou
64c16d4be1
Adjust a config define to its new name
2013-08-07 15:27:19 +01:00
George Oikonomou
c3b5d4f5e3
Add support for verbosity control
2013-08-07 15:26:22 +01:00
George Oikonomou
4cb72c1f11
Don't try to tail *.testlog after non-sim tests
...
Fixes #247
2013-08-07 15:00:18 +01:00
George Oikonomou
3446cee85b
Break travis compile tests into smaller builds
...
* The previous 01-compile test has been renamed to compile-base. It
now only tests {msp430, avr, native}-based platforms
* New test builds for arm-based and 8051-based ports (one build per arch)
* Only install arm-none-eabi, sdcc and srecord for the builds which need
them. This will somewhat speed up all other tests
* Test er-rest-example and webserver-ipv6 for the cc2538
* An erroneous comment was fixed and another comment was somewhat
clarified
2013-08-07 15:00:13 +01:00
Nicolas Tsiftes
aa2f3510be
Merge pull request #321 from nvt/antelope-domain-check
...
Prevent erroneous index creation for non-numerical attributes in Antelope.
2013-08-07 02:18:41 -07:00
Nicolas Tsiftes
b27fb1b697
Prevent erroneous index creation for non-numerical attributes.
2013-08-07 10:50:30 +02:00
Nicolas Tsiftes
2a4b985d99
Merge pull request #306 from adamdunkels/push/travis-mspgcc-4-7-0
...
Update travis to use mspgcc 4.7.0
2013-08-07 01:07:36 -07:00
Adam Dunkels
8b19a66ab9
Merge pull request #320 from g-oikonomou/travis-cc2538
...
Add CC2538 travis compile tests
2013-08-06 14:13:54 -07:00
George Oikonomou
952607d1b5
Add CC2538 travis compile tests
2013-08-06 21:17:58 +01:00
Adam Dunkels
99c331382b
Turn off the LCD by default as it is somewhat flaky
2013-08-06 21:33:03 +02:00
Adam Dunkels
2d973c5353
Allow the exit code from a failed test script to propagate to the Java
...
process, which makes it possible to track failing tests in makefiles and
via scripts.
2013-08-06 21:33:03 +02:00
Adam Dunkels
02c0b8a4e4
Parse rodata too
2013-08-06 21:33:03 +02:00
Adam Dunkels
bcdebf0e9d
Filter out symbols defined by the C implementation
2013-08-06 21:33:03 +02:00
Adam Dunkels
e147c63044
Added mspgcc 4.7.x flags
2013-08-06 21:33:03 +02:00
Adam Dunkels
7c4715ced7
Updated mspsim.jar
...
The Contiki source code holds a binary version of mspsim.jar until
we get a proper git submodule set up. This particular version of mspsim.jar
is built from Thingsquare's mspsim fork.
2013-08-06 21:31:22 +02:00
Adam Dunkels
30497b0791
Switch to mspgcc 4.7.0
2013-08-06 21:28:00 +02:00
Adam Dunkels
384ea4e298
Merge pull request #319 from g-oikonomou/travis-new-sdcc
...
Update travis to use a newer SDCC
2013-08-06 12:01:58 -07:00
George Oikonomou
9e553c3d72
Update travis to use a newer SDCC
...
Due to SDCC bug #1986 , we were previously stuck
with SDCC revision #7100 . The bug was fixed with
rev #8719 . Thus, we can now use newer versions
More info: http://sourceforge.net/p/sdcc/bugs/1986/
2013-08-06 18:28:16 +01:00
Nicolas Tsiftes
a9f0907640
Merge pull request #304 from frtos-wpan/rf230bb-merged
...
cpu/avr/radio/rf230bb/rf230bb.c (rf230_transmit): extend comment on tx s...
2013-08-05 00:24:35 -07:00
Oliver Schmidt
e339d9cd48
Merge pull request #317 from oliverschmidt/master
...
Several minor consistency improvements.
2013-07-30 15:57:00 -07:00
Oliver Schmidt
6ab336f55f
Several minor consistency improvements.
2013-07-31 00:55:31 +02:00
Oliver Schmidt
cac85f6a3a
Merge pull request #316 from oliverschmidt/master
...
Suppress some usual warnings.
2013-07-30 15:44:17 -07:00
Oliver Schmidt
3c6c7381d8
Suppress some usual warnings.
2013-07-31 00:29:52 +02:00
Oliver Schmidt
f1f198f5cc
Merge pull request #315 from oliverschmidt/master
...
Support the recently added verbosity control.
2013-07-30 15:28:52 -07:00
Oliver Schmidt
8d23d1b0bb
Support the recently added verbosity control.
2013-07-31 00:15:38 +02:00
Oliver Schmidt
c259e6a093
Merge pull request #314 from oliverschmidt/master
...
Recent changes in telnetd make exporting of those two necessary.
2013-07-30 15:08:03 -07:00
Oliver Schmidt
ff5d6e091d
Recent changes in telnetd make exporting of those two necessary.
2013-07-31 00:04:43 +02:00
Oliver Schmidt
ff2ecfd403
Merge pull request #313 from oliverschmidt/master
...
unistd.h doesn't seem to be necessary but breaks the MS VC build.
2013-07-30 15:03:30 -07:00
