joxe
c0549cad3d
added some files for MSP430X I/O
2010-08-24 16:23:20 +00:00
maralvira
df9d43ab83
increase the reception time now that tx_packet will advance the timer
...
as necessary.
2010-07-28 18:49:34 +00:00
maralvira
9a7a2742b3
remove bad call to maca_on()
...
maca_on() resets the maca and phy, takes a long time, and clobbers any
packet that is currently being transmitted or received. It doesn't
belong in prepare and was the source of a lot of latency and bad
packet transmissions.
Make sure the maca is on somewhere else.
2010-07-28 18:48:51 +00:00
maralvira
a3b9c2adb0
in tx_packet, force an interrupt if the maca isn't doing anything so
...
that the transmit starts. Or if the maca is in a reception cycle,
advance the softclock timeout to now so that transmission starts as
soon as possible (immediately if a packet isn't being received or
right after reception finishes).
2010-07-28 18:48:03 +00:00
maralvira
593a50c38f
make the debug prints in check_maca more specific
2010-07-28 18:47:35 +00:00
maralvira
422d05003f
use 32 packets in the pool by default
2010-07-28 18:47:05 +00:00
maralvira
eb0e3b7989
fix long standing bug where the last pages of NVM were not erased
...
properly.
2010-07-28 18:43:04 +00:00
oliverschmidt
c602c61468
Activated Platform-specific File System (PFS) for the C64/C128 by default for all programs with R/W CFS access.
2010-07-22 10:30:12 +00:00
oliverschmidt
9c0f5d857c
Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t.
2010-07-21 22:35:59 +00:00
maralvira
5b44d6a29a
properly drop characters when buffer is full
...
fix by David Kopf
2010-07-06 13:39:34 +00:00
joxe
0c5390339f
updated to new cc2420 spi naming
2010-06-23 10:44:41 +00:00
joxe
705f8cc451
fixed naming of SPI and CC2420 related code
2010-06-23 10:19:15 +00:00
dak664
898c00b812
Remove usually extra avr-size command
2010-06-22 17:11:38 +00:00
dak664
e45b1c042b
TIMER2 uses TIMER2 interrupt vector!
2010-06-22 16:17:24 +00:00
dak664
ab7f3bd8e3
Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen.
2010-06-18 17:30:30 +00:00
dak664
cb45883970
Turn on DEBUGFLOW and software CRC computation
2010-06-18 15:44:53 +00:00
nifi
20c8b4f9c6
removed obsolete comments
2010-06-15 13:30:42 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
maralvira
419906a769
initial mc1322x commit
...
based on commit aac3a355451d899f02737f2907af8c874ee4feba of
git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-10 14:55:39 +00:00
maralvira
285f508cc9
initial commit of src files
2010-06-10 14:49:31 +00:00
maralvira
bf9f960bbe
add board files.
2010-06-10 14:48:32 +00:00
maralvira
1145fa9ba9
initial mc1322x commit
...
based on commit aac3a355451d899f02737f2907af8c874ee4feba of
git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-09 14:43:22 +00:00
oliverschmidt
d28865abac
Adjusted hacky inline assembler to reference uip_aligned_buf instead of uip_buf - some day I'll need to clean up that (btw bogus) code.
2010-05-30 10:12:30 +00:00
oliverschmidt
126ea40994
Removed UIP_CONF_PLAIN_BUFFER again now that the pointer indirection to uip_buf was removed again.
2010-05-30 09:46:12 +00:00
nifi
808116ff56
Made SFD timestamps configurable via external definition
2010-05-10 11:32:44 +00:00
oliverschmidt
2169932727
Have the cc65 based targets stay with the "old" plain uip_buf.
2010-05-08 07:25:10 +00:00
dak664
972e2f5d4f
Add MCU to avr-size command; Remove fuse and signature from .hex; Give bootloader more memory
2010-05-04 14:14:49 +00:00
nifi
9638789d9d
Added rule to use MSPSim to show the maptable from the last compilation on MSP430 targets
2010-04-20 15:38:09 +00:00
oliverschmidt
7b5bde6336
Made the maximum number of concurrent TCP connections a highlevel config value.
2010-04-11 20:47:16 +00:00
anthony-a
04fb6e5b42
initial add.
2010-04-10 21:18:32 +00:00
anthony-a
3de90a9671
fix adc compile errors when HAVE_DMA is not true.
...
remove reference to brione_lcd.h
turn off DEBUG messages.
2010-04-10 19:59:37 +00:00
oliverschmidt
21f8e4e982
Made MAC_CONF_CHANNEL_CHECK_RATE identical to CLOCK_CONF_SECOND in order to make sure it isn't larger - which causes 'divide by zero' errors.
2010-04-05 15:17:22 +00:00
oliverschmidt
9831f02eba
Replaced dummy code with code taken from 'native'.
2010-04-05 15:13:50 +00:00
oliverschmidt
ffce456612
If rtimer_arch_now() is mapped to clock_time() it seems reasonable to map RTIMER_ARCH_SECOND to CLOCK_CONF_SECOND for consistency reasons.
2010-04-05 15:10:06 +00:00
oliverschmidt
26e61ac3f7
Programs using CFS should #include "cfs.h" ;-)
2010-04-05 13:41:29 +00:00
adamdunkels
5eb22ad289
Print out stack pointer when rebooting node
2010-04-04 12:30:10 +00:00
adamdunkels
0ed236e774
Bugfix: the clock interrupt now flushes the energy estimator to avoid overflow of the LPM mode
2010-04-04 12:29:50 +00:00
adamdunkels
52ad0008dc
Bugfix
2010-03-31 11:55:04 +00:00
adamdunkels
4447782ab4
Print out a stack trace when a node reboots because of the watchdog
2010-03-30 23:02:23 +00:00
adamdunkels
ac172a5575
Turn off LPM mode for clock interrupts to avoid rtimer wrapping during extended LPM
2010-03-29 21:53:32 +00:00
oliverschmidt
54e19782ae
Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations.
2010-03-27 15:16:57 +00:00
oliverschmidt
6769e6a99f
- Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations.
...
- Completed declarations.
2010-03-27 14:46:08 +00:00
nifi
ebfa6c5ef1
only include memcpy/set workaround when needed
2010-03-21 10:40:15 +00:00
joxe
e99c906caf
activated the new workaround...
2010-03-19 14:50:07 +00:00
joxe
7e6919cc8c
fixed workaround for memcpy/set to be memory efficient but slower
2010-03-19 14:39:45 +00:00
adamdunkels
04cdae05c3
Increased the rtimer granularity: needed to make contikimac work
2010-03-19 13:25:52 +00:00
dak664
0265f09a5c
Add RS232 port option to jackdaw USB stick
2010-03-15 18:52:55 +00:00
fros4943
db777ce3d0
reverted previous patch: appears to create problems on hardware
2010-03-05 12:06:03 +00:00
nvt-se
7543d53603
Ensure that the UART port is available before writing
2010-03-03 23:18:58 +00:00
dak664
01a3912864
Define and use radio STATE_TRANSITION, improve debug messaging
2010-03-02 16:29:59 +00:00
dak664
39e6f6a830
Clean up, functional webserver for further testing of low power protocols
2010-02-28 21:29:19 +00:00
dak664
d61676b8f7
Add RADIOALWAYSON to monitor packet losses with low power protocols
2010-02-28 21:19:33 +00:00
dak664
5debc183a9
Enable radio stats in sensor cgi as default
2010-02-26 21:38:57 +00:00
dak664
844b3a34f7
Platform 0 was matching by default
2010-02-26 21:15:28 +00:00
dak664
195f5939c4
Clean up after testing
2010-02-26 20:51:48 +00:00
adamdunkels
465125c5e7
Added support for 32-bit clock ticks: when reading the 32-bit value, make sure that it does not change between readouts to avoid reading right in the middle of it being updated
2010-02-23 18:41:20 +00:00
dak664
7274f1d1ed
Report operating channel with either radio driver
2010-02-23 17:40:09 +00:00
dak664
4ded42db1e
Add sniffer and 802 frame reporting
2010-02-23 17:37:51 +00:00
dak664
b4bc7fc3da
Make RF230BB the default radio driver
2010-02-23 02:01:46 +00:00
dak664
cbb8621e30
update to new driver format
2010-02-22 22:23:18 +00:00
dak664
658c35df11
remove debug printf
2010-02-22 22:21:15 +00:00
adamdunkels
953a8c2015
Turn off timer before updating - needed to avoid bugs in ContikiMAC - not 100% sure why
2010-02-18 22:15:54 +00:00
oliverschmidt
1817acae15
Now that the C64 mouse driver works we can activate the mouse support for this target :-)
2010-02-18 21:30:31 +00:00
dak664
a83381de30
add rtimers for cxmac
2010-02-18 17:21:44 +00:00
dak664
fee5efb141
additions for cxmac
2010-02-18 17:20:50 +00:00
dak664
98b69e1bff
No sniffer yet for RF230BB
2010-02-16 22:55:20 +00:00
dak664
23f6949af6
RF230BB addition
2010-02-16 22:51:40 +00:00
dak664
b0930cf2ec
Move rtimer-arch.c inclusion from platform to cpu
2010-02-16 21:56:15 +00:00
dak664
0f59ba3187
Add rtimers, allow Jackdaw to use RF230BB driver
2010-02-16 21:48:38 +00:00
dak664
893a31f49b
Jackdaw additions
2010-02-16 21:41:24 +00:00
dak664
8603f0f0f6
Add RADIOSTATS
2010-02-12 18:00:30 +00:00
dak664
a6ab27402a
Add RADIOSTATS
2010-02-12 16:41:02 +00:00
dak664
eb2ac1a154
Make seconds a global variable, add optional radio on time
2010-02-12 14:37:50 +00:00
ksb
8e7ada96d3
Use .u prefix for uploading to device and PROG variable to select programmer
2010-02-10 10:08:36 +00:00
oliverschmidt
50be40768b
Removed closing of stdin, stdout (and stderr on the Apple2). It was introduced in order to maximize the number of available file handles for the webserver. However none of the target machine DOSes allows to open a single file several times diminishing the intended effect very much. One the other hand not being able to "just printf() something" causes trouble over and again - i.e. hello-world seemingly not working...after all a typical case of german over-enigneering ;-)
2010-02-10 07:43:25 +00:00
oliverschmidt
1ac4d7f501
Used CFS instead of POSIX.
2010-02-08 22:26:19 +00:00
oliverschmidt
5570972957
Added a Contiki app basically combining apps/netconf and apps/dhcp. It's a 6502 specific app as it doesn't configure the running uIP instance but instead writes to the 'contiki.cfg' configuration file used by 6502 apps to configure uIP.
2010-02-08 22:08:17 +00:00
adamdunkels
dea4826f94
Added watchdog.c to the USB stick code
2010-02-07 23:05:20 +00:00
adamdunkels
091483c150
Added dummy watchdog functions for all AVR platforms
2010-02-07 07:43:35 +00:00
ksb
387483ad24
Missing file
2010-02-05 16:41:23 +00:00
ksb
2c955d6e3f
Synchronizing with my work copy.
2010-02-05 16:23:40 +00:00
ksb
cd30fa2b50
Removing obsolete directory, moved to cpu/arm/at91sam7s/
2010-02-05 15:07:26 +00:00
oliverschmidt
2d40c75efe
Allow 6502 ctk programs (all running in non-window mode) to exit the Contiki process by calling LOAD_UNLOAD().
2010-02-04 23:52:30 +00:00
c_oflynn
95d0b09954
-Fix that can cause USB stick to freeze up
...
-Add EEM Support
2010-02-04 10:40:00 +00:00
oliverschmidt
4189884793
Don't activate UDP checksums on 6502 targets as the inline-assembler implementation in cpu/6502/net/uip_arch.c is broken!
2010-01-30 20:54:15 +00:00
oliverschmidt
26c9ec41f7
Activate uIP logging when "high level config" logging is enabled.
2010-01-30 20:48:31 +00:00
adamdunkels
4ff6b5460a
Removed safeguards around the update code for the timer; turns out they weren't needed (but instead triggered a bug in MSPsim)
2010-01-30 14:03:35 +00:00
anthony-a
76749a382d
move cc2430_process to home bank since it needs to be called from a function pointer.
...
disable led code to make room in home bank.
2010-01-29 19:15:44 +00:00
anthony-a
507460d29a
update code bank assignments
2010-01-29 19:13:00 +00:00
adamdunkels
dbacf3e781
Values altered in interrupt handlers should be volatile
2010-01-26 10:20:16 +00:00
anthony-a
dbdf9982a9
change bank assignments.
...
add missing header file.
add ihx converter
2010-01-26 02:37:51 +00:00
anthony-a
1427c79b7a
include new files in source file list.
2010-01-25 23:24:03 +00:00
anthony-a
6280cea706
remove bank macros which are now in banked.h
2010-01-25 23:13:04 +00:00
anthony-a
9cfe29612a
Modifications to support banked code. Interrupts and routines accessed through function pointers reside in independent files so they can be assigned to the HOME bank. Init code can be placed in any bank.
...
Also add adc init code and bank header files.
2010-01-25 23:12:09 +00:00
c_oflynn
15ffaeed86
Fix for error where USB host could send NAK, but isn't considered in jackdaw, resulting in jackdaw hanging
2010-01-24 13:01:58 +00:00
anthony-a
742c5a0782
add definition for PSBANK used in sdcc crtbank.asm
2010-01-21 15:37:18 +00:00
anthony-a
acc1fe923c
rules file for assigning code files to specific banks.
2010-01-21 15:34:26 +00:00
anthony-a
2f853dc930
Add support for bank switching and segment.rules file to assign code to banks.
2010-01-21 15:33:19 +00:00
adamdunkels
5a03e4e6ad
Bugfix: changed #ifdef to #if, otherwise the SFD code would be enabled anyway
2010-01-19 20:35:41 +00:00
adamdunkels
9d751da8e5
Disable SFD interrupt by default
2010-01-19 13:11:23 +00:00
