Commit graph

107 commits

Author SHA1 Message Date
nifi 05d4bc4532 allow UIP_CONF_ROUTER to be set as compilation flag 2009-06-29 09:54:39 +00:00
joxe 1cc33ac451 configured routing to off for sky-IPv6 2009-06-26 12:01:23 +00:00
nvt-se b912a41ea3 use polite announcements when running Rime over UDP. 2009-06-24 16:44:26 +00:00
nifi 912aba7280 added init function in MAC driver for easier configuration 2009-06-22 11:14:11 +00:00
fros4943 d54176205c decreased default elfloader memory usage for sky platform 2009-05-18 10:32:56 +00:00
adamdunkels 900480959b Increased the default number of queue buffers: there usually is plenty of RAM left, so we should be able to afford it 2009-05-10 21:15:16 +00:00
adamdunkels 064f4488d4 Increase default CPU speed from 2.4576 MHz to 3.9 MHz. Communication works better, at a low power cost 2009-04-29 11:43:48 +00:00
fros4943 bc6704079c cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization 2009-04-16 14:34:51 +00:00
adamdunkels 3415ff26bd Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS 2009-04-10 00:39:19 +00:00
nifi b41b79e3a9 Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets). 2009-04-06 17:18:20 +00:00
nifi 900d8d8e17 changed to use HC01 compression for uip6 2009-04-06 16:01:11 +00:00
nifi 8b41f3a6a8 set rime addr size to 8 for uip6, restored clock resolution 2009-04-06 14:59:49 +00:00
nifi a36e529df1 added configuration for panid 2009-04-06 13:31:00 +00:00
nvt-se f53560f6a5 enabled multihop routing, increased uip buffer size. 2009-04-06 13:23:14 +00:00
nifi c1d490b6a7 added workaround for memcpy/memset bug in mspgcc 2009-04-06 13:07:37 +00:00
adamdunkels 58331e6802 Made tick resultion more fine-grained to support a shorter LPP listen time 2009-04-03 11:46:48 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
julienabeille 0395ff5f39 sicslowpan Typo 2009-03-09 08:19:07 +00:00
adamdunkels e3043b1be2 Enable communication power accounting for xmac by default 2009-03-01 20:43:37 +00:00
nvt-se 47d70f2ae3 Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option. 2009-03-01 12:00:00 +00:00
nvt-se b47221672a switched cfs offset type to signed long to allow backward movements with cfs_seek. 2009-02-28 13:41:16 +00:00
nvt-se 9f8f773b43 use unsigned long as cfs offset type. 2009-02-27 14:53:15 +00:00
adamdunkels d761dfebd1 Bugfix: reduced the size of the uIP buffer to account for MAC header space 2009-02-25 10:23:03 +00:00
adamdunkels 7781bbea58 Enabled X-MAC announcements by default, disabled polite broadcast announcements by default 2009-02-14 22:52:24 +00:00
joxe 9689a579be added DCO/CPU speed re-synch each 30 seconds 2009-02-04 19:32:20 +00:00
fros4943 5f3c1a0e12 elfloader executing loaded programs from ram (not rom) by default on msp430 platforms. 2009-01-15 09:04:04 +00:00
nvt-se 0c4f7bed8f temporary fix to get sicslowpan.c working on the Sky platform:
conventional MAC implementations require a call to the MAC driver's
read function.
2008-11-06 20:45:06 +00:00
nvt-se 21e4b4be80 map rime address to mac address for ipv6 2008-11-06 15:14:24 +00:00
nvt-se d1d09ea1fd added IPV6 configuration. 2008-11-05 14:31:06 +00:00
adamdunkels 28331191b3 Changed name of simple-cc2420 to cc2420 2008-07-02 09:38:06 +00:00
adamdunkels 1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
adamdunkels 31ea41d8db Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level 2008-05-14 19:19:28 +00:00
adamdunkels 412facb831 This is an initial commit of an implementation of the Chameleon
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.

The details are in our SenSys 2007 paper:

Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.

http://www.sics.se/~adam/dunkels07adaptive.pdf

This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
adamdunkels 5bcd0ab60b Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol 2008-02-24 21:11:35 +00:00
adamdunkels dc43a9713d Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader 2008-02-03 21:01:36 +00:00
adamdunkels 690805ebe7 Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL 2008-01-08 08:19:56 +00:00
adamdunkels 2b4f33a4dd Enabled support for CC2420 timestamps 2007-12-16 15:05:04 +00:00
adamdunkels f1271464fd Turned on energy estimation and profiling by default 2007-11-13 21:10:50 +00:00
adamdunkels 0ce1708c76 #ifdef around RF_CHANNEL 2007-11-06 20:28:09 +00:00
nifi 9d75d6d153 enabled inline functions 2007-09-19 14:09:31 +00:00
bg- a20c9e6abb * Include msp430def.h for standard defines.
* Remove obsolete LPM_CONF_OFF definition.
2007-08-16 13:10:53 +00:00
adamdunkels 1f835946ca Added X-MAC configuration, reduced ELF loader text memory size 2007-05-22 21:12:15 +00:00
oliverschmidt 4fd1e3ece0 Added signed 32 bit data type. 2007-05-12 20:58:12 +00:00
bg- b32db9763e * Bump maximum number of udp sockets to 16.
* Remove unused stuff.
2007-04-11 15:22:05 +00:00
bg- 48c5cae451 * More routing and forwarding cache entries. 2007-04-04 11:39:49 +00:00
adamdunkels 913e33c434 Increased RAM for loadable modules 2007-03-25 21:54:06 +00:00
nifi 52b9210b57 added cfs xmem size 2007-03-23 12:15:50 +00:00
nifi 54228ae6e4 Node IDs are stored in external memory and restored on bootup 2007-03-23 09:59:08 +00:00
adamdunkels 4d9a716a50 ELF loader memory size, CFS RAM memory size 2007-03-23 00:00:15 +00:00
adamdunkels 70c1652c13 Added CFS xmem conf 2007-03-21 23:26:25 +00:00
adamdunkels 9adc7dc49b Added LPM and IRQ configuration to make Tmote Sky port build with the Contiki build system 2007-03-15 21:59:44 +00:00
bg- 429d41defd * General stuff for different baudrates:
- ubr argument to slip_arch_int

    - macros for calculating ubr

    - argument -Bbaudrate to tools tunslip and scat
2007-02-02 13:26:48 +00:00
bg- 26f9d3847b * Tmote sky has a CC2420_RADIO. 2007-01-24 16:31:40 +00:00
oliverschmidt 62fa3b8c01 Changed the Contiki Interface declaration macros from CCI/CLI to CCIF/CLIF because of already existing macros: Both CCI and CLI :-( 2006-08-15 14:46:33 +00:00
oliverschmidt 48609fb3a3 Added defines for declaring functions/data which are part of the CCI (Contiki Core Interface) and CLI (Contiki Loadable Interface). Both defines are empty for all platforms but the upcoming Win32 port. 2006-08-13 15:06:08 +00:00
bg- 0bf3db5df7 Make malloc machine independent by relying on dependent sbrk(2). 2006-08-11 13:41:31 +00:00
bg- 7b791de692 Import of files for the Tmote sky platform. 2006-08-02 14:44:46 +00:00