Commit graph

962 commits

Author SHA1 Message Date
Oliver Schmidt 2263c1aa55 - Optimized LAN91C96 driver for speed and size.
- Speed: The primary byte copy loops are reduzed to the bare minimum by adjusting the base pointer 'ptr' and loop register 'y' in such a way that the 'y' overflow matches the low byte of the loop size.

- Introduced a loop for setting the MAC address.

Additional minor fix:

- Properly start self modification with first location.
2013-09-12 23:32:26 +02:00
Oliver Schmidt ea08635ca4 Optimized CS8900A driver for speed and size.
- Speed: The primary byte copy loops are reduzed to the bare minimum by adjusting the base pointer 'ptr' and loop register 'y' in such a way that the 'y' overflow matches the low byte of the loop size.

- Size: Factored out all repeated code into subroutines. Introduced a loop for setting the MAC address.

Additional minor changes:

- Activate frame reception as last step of initialization after CS8900A configuration.

- Properly set internal address bits used by the CS8900A.
2013-09-12 23:32:25 +02:00
Brad Campbell 982ca0fb46 Updates CC2538 GPIO
1. Fixes two of the comments to GPIO macros. They were copied but not
updated.
2. Adds SET and CLR macros for controlling GPIO pins.
2013-09-11 21:39:56 -04:00
Nicolas Tsiftes 7987a6dac7 Merge pull request #328 from g-oikonomou/cc2538-uart-config
Make the CC2538 UART driver more configurable
2013-08-09 10:20:36 -07:00
George Oikonomou 460d5bcb5d Fix cc2530 UART1 init bug
Fixes #286
2013-08-09 16:09:12 +01:00
George Oikonomou cb075dec65 Disable SDCC warnings 110 and 126
Those two warnings are optimisation-related
* 110 warns that an always-false if branch has been optimised out
* 126 warns about unreachable code which also gets optimised out

In disabling those warnings, we make the build less cluttered
2013-08-09 15:57:49 +01:00
George Oikonomou 20f06e3271 Support verbosity control for 8051-based platforms 2013-08-09 15:57:21 +01:00
George Oikonomou c89450a233 Change to sdar from the now deprecated sdcclib 2013-08-09 15:56:16 +01:00
George Oikonomou b025759665 Don't redirect sdld output to dev/null
This was used in the past because sdld was
very verbose when linking banked hex files. New
sdld versions do not exhibit this level of
verbosity and therefore the redirect can be
stopped
2013-08-09 15:56:15 +01:00
George Oikonomou 1b0470687b Change the cc2531 usb stick descriptor
The CC2531 USB stick now identifies itself as a
'Texas Instruments CC2531 USB Dongle' and uses a
TI-assigmed VID:PID. The VID:PID is now configurable
in contiki- or project-conf.h
2013-08-09 15:51:58 +01:00
George Oikonomou 0a7094bc39 Remove leftover make targets
The sensinode platform does not support .upload and .serialdump
Their presence in the makefile has confused in the past confused
some users. This commit removes them

The commit also removes the $(OBJECTDIR)/%.rel: %.cS recipe which
is not used by either 8051 platform and is probably broken anyway,
since it has been unmaintained for years
2013-08-09 15:48:05 +01:00
George Oikonomou 6c6013b898 Make the CC2538 UART driver more configurable
* We can now very easily switch between UART0 and UART1 through a define
* We can also configure the UART RX and TX port/pin through defines
2013-08-09 12:20:25 +01:00
George Oikonomou c3b5d4f5e3 Add support for verbosity control 2013-08-07 15:26:22 +01:00
Nicolas Tsiftes a9f0907640 Merge pull request #304 from frtos-wpan/rf230bb-merged
cpu/avr/radio/rf230bb/rf230bb.c (rf230_transmit): extend comment on tx s...
2013-08-05 00:24:35 -07:00
Oliver Schmidt 6ab336f55f Several minor consistency improvements. 2013-07-31 00:55:31 +02:00
Oliver Schmidt 3c6c7381d8 Suppress some usual warnings. 2013-07-31 00:29:52 +02:00
Oliver Schmidt 8d23d1b0bb Support the recently added verbosity control. 2013-07-31 00:15:38 +02:00
Oliver Schmidt 116c3f119b unistd.h doesn't seem to be necessary but breaks the MS VC build. 2013-07-31 00:02:29 +02:00
Werner Almesberger be0a296049 cpu/avr/radio/rf230bb/rf230bb.c (rf230_transmit): extend comment on tx sequence
Explain that the transmission is intentionally started before copying the
frame to the buffer.
2013-07-28 18:43:29 -03:00
Mariano Alvira 5d19de3dbf Merge pull request #266 from ismb-pert/fix-mbxxx
mb851 platform is now the more generic mbxxx. STM32W_CPUREV environment variable is used to select the variant of STM32W to use.
2013-07-26 07:38:11 -07:00
stefano pascali 36e7db42de Some little refactor 2013-07-19 16:15:55 +02:00
stefano pascali b43ce0f677 Travis-ci tweaks, added CPUREV to 01 regression test, needed by mbxxx platform 2013-07-12 17:07:04 +02:00
stefano pascali fcb09d5d30 Fixed mbxxx platform 2013-07-11 17:56:17 +02:00
Mariano Alvira 6307f3ff95 mc1322x: make uart buffer sizes configurable from contiki-conf.h 2013-07-04 14:09:40 -04:00
Oliver Schmidt ad34b714cd Merge pull request #287 from oliverschmidt/master
The current cc65 build doesn't require this workaround anymore.
2013-06-27 15:38:48 -07:00
Oliver Schmidt fb1de74dc4 The current cc65 build doesn't require this workaround anymore. 2013-06-28 00:36:33 +02:00
Peter A. Bigot 5fc0575e99 Makefile.include: support make clean all
Historically $(OBJECTDIR) was created when Makefile.include is read.  A
consequence is that combining "clean" with "all" (or any other build
target) results in an error because the clean removes the object
directory that is required to exist when building dependencies.
Creating $(OBJECTDIR) on-demand ensures it is present when needed.

Removed creation of $(OBJECTDIR) on initial read, and added an order-only
dependency forcing its creation all Makefile* rules where the target is
explicitly or implicitly in $(OBJECTDIR).
2013-06-20 17:45:41 -05:00
Oliver Schmidt 79bb5ea73f Removed some more old RCS tags from the Contiki source tree. 2013-06-13 15:54:26 +02:00
Oliver Schmidt cbce31cb59 Another small addition for platform 'Atari XL'. 2013-06-02 23:36:28 +02:00
Robert Quattlebaum 36fbbe48aa Merge pull request #244 from darconeous/pull-requests/cpu-native-tapdev-ipv6-fix
native/net/tapdev: Fix for new `UIP_CONF_IPV6` handling.
2013-05-21 17:42:44 -07:00
Nicolas Tsiftes a445c4020d Merge pull request #153 from darconeous/pull-requests/cpu-avr-bootloader
avr/bootloader.c: Now compatible with bootloaders which always run first
2013-05-20 05:49:13 -07:00
Robert Quattlebaum 09eec82d08 Merge pull request #134 from darconeous/pull-requests/cpu-avr-avrdude-mcu
cpu/avr: Added "AVRDUDE_MCU" configuration parameter.
2013-05-19 17:35:26 -07:00
Robert Quattlebaum 9c70e0e5cc native/net/tapdev: Fix for new UIP_CONF_IPV6 handling. 2013-05-19 17:27:30 -07:00
Robert Quattlebaum 674f70b6c3 cpu/avr: Added "AVRDUDE_MCU" configuration parameter. 2013-05-19 14:23:31 -07:00
Adam Dunkels aaac20a950 Merge pull request #225 from tecip-nes/pic32_minor_reorganization
Pic32 minor reorganization
2013-05-19 14:22:14 -07:00
Robert Quattlebaum 9c17a542a7 avr/bootloader.c: Now compatible with bootloaders which always run first.
The boot loader now knows when to go into bootstrap mode by
looking for a specific EEPROM value. Also updated code style
to match Contiki code style guidelines.
2013-05-19 08:21:16 -07:00
Robert Quattlebaum 535e90343c Merge pull request #144 from darconeous/pull-requests/settings-for-all-targets
core/lib/settings: Generalized settings manager to work on any platform
2013-05-18 12:03:09 -07:00
Robert Quattlebaum b8c0f2de6c cpu/native: Add file-backed simulated EEPROM to native cpu.
This patch removes a defunct EEPROM implementation from the native
platform and provides a new EEPROM implementation for the native cpu.
The previous implementation appears to be vestigal.

This is useful for testing code which uses the EEPROM without running
the code on the actual hardware.

By default the code will create a new temporary file as the EEPROM
backing, reinitializing each time. If you would like to preserve the
EEPROM contents or specify a specific EEPROM file to use, you can set the
`CONTIKI_EEPROM` environment variable to the name of the EEPROM file you
wish to use instead. If it already exists, its contents will be used.
If it does not already exist, it will be created and initialized by
filling it with `0xFF`---just like a real EEPROM.

A new example is also included, which was used to verify the correctness
of the implementation. It can easily be used to verify the EEPROM
implementations of other targets.
2013-05-18 10:29:41 -07:00
Giovanni evilaliv3 Pellerano c33d51e762 pic32 minor cleanups 2013-05-17 14:32:39 +02:00
Adam Dunkels 59a8df14a8 Merge pull request #189 from sieben/markdown
Update to markdown
2013-05-16 00:24:25 -07:00
François Revol 7967779e6c tapdev: Fix using an uninitialized buffer 2013-04-20 14:42:19 +02:00
George Oikonomou 704309cfd4 Change the InfoPage Location of the IEEE address 2013-04-17 15:44:01 +01:00
George Oikonomou 8b5b2bd4d8 CC2538 Documentation typo and grammar fixes 2013-04-17 15:41:41 +01:00
George Oikonomou 007e113ea9 Improve handling of CDC ACM line state
- For the CC2538, simplify handling of USB_CDC_ACM_LINE_STATE
  events. Ignore the Carrier Control (RTS) bit when receiving
  a SET_CONTROL_LINE _STATE request, we are a full duplex device.
- Improve behaviour of the CC2531 USB stick when there is no
  process on the host to read IN data. Basically, we adopt the
  CC2538 approach and we only send data when a DTE is present
2013-04-16 15:49:05 +01:00
George Oikonomou 40f49948e6 New Platform: TI CC2538 Development Kit
This commit adds cpu, platform and example files,
providing support for running Contiki on TI's cc2538 DK
2013-04-06 21:07:31 +01:00
Rémy Léone e6bd4f1dde Rename to md 2013-03-26 23:15:37 +01:00
Rémy Léone 7b40a568a6 Update to markdown
- Spellchecking
- Update plain text to github markdown
2013-03-26 16:55:19 +01:00
Robert Quattlebaum 28a1e40ebd core/lib/settings: Generalized Settings Manager to work on any platform
This commit moves the Settings Manager from the AVR codebase
into the Contiki core library. Any platform that implements
the Contiki EEPROM API can now use the Settings Manager's
key-value store for storing their persistent configuration info.

The Settings Manager is a EEPROM-based key-value store. Keys
are 16-bit integers and values may be up to 16,383 bytes long.
It is intended to be used to store configuration-related information,
like network settings, radio channels, etc.

 * Robust data format which requires no initialization.
 * Supports multiple values with the same key.
 * Data can be appended without erasing EEPROM.
 * Max size of settings data can be easily increased in the future,
   as long as it doesn't overlap with application data.

The format was inspired by the [OLPC manufacturing data format][].

Since the beginning of EEPROM often contains application-specific
information, the best place to store settings is at the end of EEPROM
(the "top"). Because we are starting at the end of EEPROM, it makes
sense to grow the list of key-value pairs downward, toward the start of
EEPROM.

Each key-value pair is stored in memory in the following format:

Order    | Size     | Name         | Description
--------:|---------:|--------------|-------------------------------
       0 |        2 | `key`        | 16-bit key
      -2 |        1 | `size_check` | One's-complement of next byte
      -3 |   1 or 2 | `size`       | The size of `value`, in bytes
-4 or -5 | variable | `value`      | Value associated with `key`

The end of the key-value pairs is denoted by the first invalid entry.
An invalid entry has any of the following attributes:

 * The `size_check` byte doesn't match the one's compliment of the
   `size` byte (or `size_low` byte).
 * The key has a value of 0x0000.

[OLPC manufacturing data format]: http://wiki.laptop.org/go/Manufacturing_data
2013-03-20 11:57:13 -07:00
Oliver Schmidt 6ba28bf74f Merge pull request #180 from mmuman/cleanup-and-fixes
Cleanup and fixes
2013-03-20 02:37:24 -07:00
François Revol 22bcb07c61 tapdev: Log to stderr; add tracing
Use stderr for logging to avoid polluting stdout.
Add some DEBUG tracing.
2013-03-19 19:41:20 +01:00