../..//apps/er-coap/er-coap-observe.c:237:15: warning: unused variable
‘content’ [-Wunused-variable]
This was caused by a buffer that was declared, but used only in
commented out code.
The variable was moved to the commented out block.
The block was surrounded by an #if 0 ... #endif to make it easier to
uncomment.
Everything still compiles with the code in question uncommented.
When a client sends a CoAP request with no block2 size,
the default one would be set to REST_MAX_CHUNK_SIZE.
However, this is not guaranteed to be a power of 2.
This can lead to clients receiving a bigger payload than expected as
part of the header, and ending up with duplicated content.
Setting the default to COAP_MAX_BLOCK_SIZE,
which is guaranteed to be a power of 2, fixes this.
The default Telnetd idle timeout of 30 seconds seems somewhat short. Best to have it user-configurable (incl. the option to turn it off with an config value of 0).
In order to have the wget command make some sense the write command should be present too.
- On the Apple][ reduction of the MTU seems to gain just enough RAM to have the (rather heavy-weight) full-blown C library file I/O working.
- On the C128 there's way too little RAM so there's no wget command but only the file commands.
- On the CBMs a dummy lseek() was necessary to have the read command link.
Forms with multiple submit buttons are rather rare but nevertheless the most popular web page (www.google.com) contains one with the two submit buttons "Google Search" and "I'm Feeling Lucky". So we want to support that - incl. the usual feature to the interpret first button as default button used when the user presses the ENTER key.
Script code may contain a '<' as part of a equation. We erroneously interpreted that as start of a tag. Now we check for the very next char to be a '/' as the only tag allowed is the </SCRIPT> tag.
When using the 'down' button on a certain number of lines curently displayed at the bottom of the screen is redisplayed at the top of the screen. Given our usually small screen size and often large pages requiring many 'down' operations the number 'four' seems too generous so lets reduce it to 'two'.
- The wraparound handling when using the history with the 'back' button is actually depending on history_last being unsigned (which is the default for cc65) so define it explicitly as unsigned to make it work on other targets too.
- As there's no 'forward' button it doesn't make sense to keep history entries after using them with the 'back' button. Clearing them on use on the other hand avoids an "infinite history".
Although we for sure don't support HTTPS we need to recognize it. Nowadays it has become pretty usual to redirect HTTP URLs to HTTPS URLs in order to force privacy (thanks, NSA !). So far our redirection handler didn't recognize an HTTPS URL as abslute URLs and therefore appended it to the curent URL. This led to an endless redirection loop. Now we recognize the HTTPS redirection and generate a minimal document on the fly to inform the user of (for us unrachable) the redirection target.
HTML links with HTTPS URLs are treated just like fragment-only links meaning that they get simply completely ignored.
The code to trim spaces from the end of the URL behaved undefined if the URL was empty. That scenario is far from hypothetic as i.e. pressing the 'back' button with no (more) entry in the history yields an empty URL.
The way our HTML parser triggers newlines is a guess at best. On the other hand our screen estate is severely limited. Instead of trying to (further) improve the way we translate tags to newlines it seems more reasonable to simply never render more than two successive empty lines.
We don't handle URLs with fragments exactly ;-) well - meaning we send the fragment part to the server and we don't display the document starting at the anchor tag. Instead of adding the missing capabilities and thus adding lots of code I instead opted to simply ignore fragment-only links. This approach is based on the practical knowledge that fragments are primarily used for intra-document navigation - and are as such fragment-only links. And as we ignore them anyway when displaying the document it's more ergonomic to not have those links in the first place.
Complex script code tends to contain other tags inside strings. As we generally don't parse strings we erroneously interpreted those tags. The easiest workaround is to not interpret tags at all until the </SCRIPT> tag is found.
parse_tag() is called both for attributes inside a tag and the end of the tag itself. For most tags parse_tag() doesn't distinguish both cases. This means that the "tag action" is additionally triggered for every tag attribute. When the tag "action" is setting some state this doesn't hurt. For many tags the "tag action" is to render a newline. Superfluous newlines are sort of acceptable to keep the code as small as possible. However the <li> "tag action" is to render a newline followed by an asterisk - and superfluous asterisks are ugly so we check for <li> if parse_tag() was called for the end of the tag itself.
At the time do_word() is called s.word[s.wordlen] is undefined. So it doesn't make sense to make decisions based on its value - and in fact I don't see why it was necessary/desirable in the first place.
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
Nowadays many HTTP server set cookies which may easily result in HTTP header fields longer than our 'httpheaderline' buffer. It doesn't hurt if we can't parse them but we need to be able to skip them and continue to parse the following header fields.
WWW_CONF_MAX_URLLEN is used as length for the 'editurl' textentry widget. The CTK code for handling that widget uses a single byte so the length can't be > 255. Thus WWW_CONF_MAX_URLLEN can't be > 255 as well.
Now the necessary settings are in adc.h. Refactored to allow repeated
ADC reads without reinitialization. Arduino allows setting
analogReference, this is now also implemented.
ADC is now initialized to sane values in apps/arduino/arduino-process.c
dev/arduino/arduino-compat.h now has all hardware independent settings
for arduino (some moved from platform/osd-merkur/dev/hw-arduino.h).
turnOffPWM re-implemented with hw_timer, removed from wiring_digital.c
ADC-specific arduino stuff moved to arduino-compat.h
Arduinos wiring_analog no longer necessary.
arduino-sketch example now reads analog inputs 1 and 5 using analogRead.
Now there is a generic resource that can generate and parse
application/json as well as text/plain. It can be re-used, only the
from_string and to_string routines have to be written and the resource
properly set up. A new resource format is specified, see
GENERIC_RESOURCE in, e.g., examples/osd/pwm-example. This is now used in
all my examples, namely pwm-example, arduino-sketch, wallclock-time.
There was an off by one error for the month in time formatting (in
gmtime and localtime). And the leap-year computation was broken. Both
fixed now, so we get a correct date. For localtime we are still 2 hours
off because daylight saving isn't implemented yet.
Also renamed gmtime to utc.
New discovery: Contiki also uses timer 0. With almost the same interface
as Arduino. So we now completely get rid of wiring.c (only the main
file, the other wiring_xxx stay) and implement Arduino timer, delay, etc
in terms of the corresponding Contiki routines. Verified that now delay
works as expected. The LED in examples/osd/arduino-sketch blinks!
Before this, the arduino_init routine in wiring.c destroyed the timer-0
initialization of contiki, making both, contiki timer implementation
*and* contiki timer implementation fail if the arduino_init routine was
called. Now both work.
Squashed with following bug-fix commit.
We can now directly compile arduino sketches (.pde) files.
Arduino compatible analogWrite works now.
But there is still a long way to go, serial I/O and timer stuff (delay,
millis etc) currently don't work (not tested but I don't expect this to
work).
It can be used in an arduino sketch or in a normal contiki program.
We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's
Arduino compatible. If you need different frequencies see native timer
usage in examples/osd/pwm-example
In a contiki program you have to call arduino_pwm_timer_init to
initialize the timer before pwm works. The arduino sketch wrapper
already does this.
For running a sketch, see examples/osd/arduino-sketch
New application and new example.
We use the built-in timer routines and add an offset to get the
wallclock time. The offset can be set by time-changing routines
(currently only settimeofday).
We also maintain an offset for timezone handling but this isn't
currently fully implemented.
Currently, the observe value for a response to a GET observe request is always set to zero. That may cause the subsequent notification to have the same observe value. In fact, that happens every time an observable resource is observed for the first time (since the obs_counter is implicitly initialized to zero).
This patch fixes such a problem by setting the observe option value of responses to obs_counter (and then incrementing it).
type process_data_t. This was an artifact when the choice was
made to use the void * type for the data parameter in processes.
Changed parameter 'void * data' of process_post_synch to
process_data_t for consistency.
Checked all the uses of process_start() in contiki and fixed casts
of the data parameter.
This proposed MACRO simplifies jsontree_array declarations. It takes as arguments the name of the array and its size. ( I've modified the indention as requested )
- Up to now the CTK program handler was necessary to start wget and forward the URL. Now alternatively the webbrowser uses the underlying OS to exec wget.
- Up to now windowed CTK was necessary to display the acknowledge dialog. Now alternatively the webbrowser displays the acknowledge text and buttons right in the webpage area.
- For now the targets 'win32' and 'c64' make use of the new capabilities.
