Cristiano De Alti
5a829d818d
er-rest-example leveraging the new rave sensors.
2015-09-21 22:53:48 +02:00
Cristiano De Alti
d2528caa85
Implement battery and temperature sensors.
...
On the raven, the battery and temperature readings are available
from the companion 3290 cpu over the serial line.
Modify the existing raven-lcd-interface application to export
these sensors.
2015-09-21 22:45:57 +02:00
Mariano Alvira
aecb591d12
Merge pull request #688 from SmallLars/flash
...
App/Tool/Example for usage of additional flash on econotag/mc1322x
2015-09-21 10:58:33 -05:00
Moritz 'Morty' Strübe
d68cbb2980
Ensure that the data in ringbuff is accessed in the right order
2015-09-21 09:38:45 +02:00
Billy Kozak
467f28286c
The CSMA driver no longer throttles queued packets
...
Fix for #1166
Updated the CSMA driver so it no longer applies a time delay for
sending queued packets which were sent without error.
2015-09-18 09:35:29 -06:00
Billy Kozak
32e668ae2a
Fix for #1165
...
It is possible that packetbuf is modified by the call to
mac_call_sent_callback. If this occurs ContikiMAC will not be able to
recognize that a packet is pending.
This fixes this problem by storing pending status in a local variable before
calling mac_call_sent_callback.
2015-09-18 09:33:10 -06:00
Valentin Sawadski
cad1c37fb3
Better prints of ::FFFF: prefixed IPv4-mapped addresses
...
IPv4-mapped Address [1] are now printed accoriding to the text representation
mixed IPv4 and IPv6 networks as specified in [2]
[1] https://tools.ietf.org/html/rfc6890#page-14
[2] https://tools.ietf.org/html/rfc3513#page-5
2015-09-18 14:57:01 +02:00
Simon Duquennoy
66ec94fd74
Minor improvements to RPL probing
2015-09-17 22:54:38 +02:00
Simon Duquennoy
a7ce312ee3
Enhanced RPL loop repair: send unicast DIO to source when detecting a loop from ext header, update rank along the path (when rank error is signaled)
2015-09-17 22:53:12 +02:00
Niclas Finne
ef9a36f9f6
Ensure parent resources match the path exactly and not as prefix.
2015-09-17 17:55:22 +02:00
Valentin Sawadski
43770a934d
Refactor tcpip.c packet input
...
The UIP_CONF_FORWARD is now handled in a better way that the general structure
of packet_input can be clearer seen.
2015-09-15 09:31:43 +02:00
Billy Kozak
324d03b53c
CC26xx - fully shutdown the rf-core & abort rx op
...
Prior to this patch, the ieee radio driver did not explicitly abort
the rx operation or power down the analog components of the radio
prior to shutting down the rf-core.
The result of this was that the rf-core continued to use a lot of
power even while "off".
This patch fixes this problem.
2015-09-14 13:18:01 -06:00
Lars Schmertmann
46ffc509c1
Added App/Tool/Example for usage of additional flash on econotag/mc1322x
2015-09-14 20:43:12 +02:00
Mariano Alvira
552408b241
Merge pull request #685 from SmallLars/mc1322x
...
Added mc1322x functions: clock_set_seconds, soft_reset, nvm_verify
2015-09-13 12:35:53 -05:00
Mariano Alvira
1ddcdf4886
Merge pull request #839 from gebart/rf230-isr
...
rf230bb: Handle all IRQ flags in one ISR call. (Q: Is the current ISR valid?)
2015-09-13 12:06:36 -05:00
Mariano Alvira
050275293a
Merge pull request #922 from atiselsts/rs230bb_fixes
...
Atmel 230bb: always increase the rx frame ringbuffer cursor in rf230_read()
2015-09-13 11:58:16 -05:00
Marco Grella
875bfd0a1a
Updates of REAME files (main and submodule).
2015-09-11 15:56:12 +02:00
Joakim Eriksson
fe6d8685ac
Fixed support for NULL attributes of resources
2015-09-11 00:52:45 +02:00
Joakim Eriksson
1e0b5292d7
Loop-unroll in CoAP for fixing some potential bugs on some platforms
...
where size_t is not the same as unsigned int.
2015-09-11 00:52:45 +02:00
Nicolas Tsiftes
70b3585f76
Merge pull request #1249 from simonduq/fix-rpl-icmp-warnings
...
Fix compiler warnings in rpl-icmp6.c
2015-09-10 14:44:04 +02:00
Nicolas Tsiftes
2ec3b1e973
Merge pull request #1185 from sumanpanchal/cc2520
...
Fixed the issue with CC2520_READ_REG macro to read correct value of register.
2015-09-10 14:37:00 +02:00
Marco Grella
87970a88a4
Comments and documentation fixes.
2015-09-10 14:28:08 +02:00
Valentin Sawadski
b729dc8985
Don't override LDFLAGS on Linux for the native CPU
2015-09-10 11:13:22 +02:00
Fredrik Österlind
bab413b824
Merge pull request #1251 from MattiasBuelens/cooja-cfs-file-size
...
Cooja: Track CFS file size
2015-09-10 10:31:33 +02:00
Mattias Buelens
72aac552ef
Cooja: Track CFS file size
...
Previously, the Cooja mote assumed that its file was always initially empty (file.endptr == 0). Therefore, a file uploaded to a mote's CFS could never be read by the mote, as the mote would prevent reads from going past the EOF (indicated by endptr).
By tracking the file size and making it accessible to Cooja, the correct size of the uploaded file can be reported to the mote and allow it to read the uploaded file.
2015-09-09 23:06:09 +02:00
Simon Duquennoy
5329c42034
Remove unused variables
2015-09-08 23:38:43 +02:00
Sumankumar Panchal
27dd3f493b
Solved issue with CC2520_READ_REG macro to read correct value of register.
2015-09-08 19:39:23 +05:30
Nicolas Tsiftes
677929da73
Merge pull request #1227 from simonduq/travis-er-rest-example-wismote
...
Travis: compile er-rest-example for the Wismote platform rather than Sky
2015-09-08 14:09:42 +02:00
Nicolas Tsiftes
bebf0f9156
Merge pull request #1246 from nvt/wismote-fixes
...
Minor fixes for the WisMote platform
2015-09-08 13:52:45 +02:00
Simon Duquennoy
63ddba93a9
Merge pull request #1169 from feshie/pr-warnings-fix
...
Fix multiple warnings (TCPIP, coap-observe, msp430, z1/tmp102, ContikiMAC)
2015-09-08 09:05:44 +02:00
Marco Grella
b7459a12c1
Added radio sensor.
2015-09-07 19:59:03 +02:00
Arthur Fabre
e8cbf2e5fb
Fix warning in TCPIP
...
When disabling TCP support, the following warning is triggered:
../..//core/net/ip/tcpip.c:159:1: warning: ‘start_periodic_tcp_timer’
defined but not used [-Wunused-function]
An added ifdef guard now only defines this function when TCP support is
enabled.
2015-09-07 17:52:22 +01:00
Arthur Fabre
158087db62
Fix warning in coap-observe
...
../..//apps/er-coap/er-coap-observe.c:237:15: warning: unused variable
‘content’ [-Wunused-variable]
This was caused by a buffer that was declared, but used only in
commented out code.
The variable was moved to the commented out block.
The block was surrounded by an #if 0 ... #endif to make it easier to
uncomment.
Everything still compiles with the code in question uncommented.
2015-09-07 17:51:27 +01:00
Rémy Léone
7a5071dd30
Adding a gitattributes and correcting line-endings
...
https://help.github.com/articles/dealing-with-line-endings/
2015-09-07 15:40:02 +02:00
Nicolas Tsiftes
8a7e2e5892
Merge pull request #1240 from atiselsts/energest_accuracy
...
Improve energest accuracy
2015-09-07 15:35:35 +02:00
Fredrik Österlind
dde83500c9
Merge pull request #1056 from tim-ist/packet_sync
...
[Cooja/cc2420] Check the frame preamble and MPDU length before parsing an outgoing packet
2015-09-07 14:36:15 +02:00
Anmol Sarma
c084c46b9b
Fix handling of Token Length greater than 8
2015-09-05 20:46:29 +05:30
George Oikonomou
4ce6d215e8
Use volatile access for CMD_IEEE_TX
2015-09-04 17:59:25 +01:00
George Oikonomou
dd640cd229
Merge pull request #1195 from bkozak-scanimetrics/cc26xx_improve_watchdog
...
CC26xx - various fixes and improvements for the watchdog module
2015-09-04 17:20:50 +01:00
George Oikonomou
b6dac70474
Merge pull request #1231 from bkozak-scanimetrics/cc26xx_rf_core_fix_transmit_wake
...
CC26xx - enable correct IRQ in rf_core_cmd_done_en
2015-09-04 17:08:50 +01:00
Marco Grella
17aafb9daa
Align to current master
2015-09-04 17:01:04 +02:00
Atis Elsts
eac1973073
Introduce ENERGEST_SWITCH macro. It allows to switch between energest modes without running into the risk of losing a tick in the process
2015-09-04 11:49:02 +02:00
Atis Elsts
2f79810b58
Use ENERGEST_SWITCH to switch between different power modes to improve energest accuracy.
2015-09-04 11:46:00 +02:00
Marco Grella
a627a54224
Fixes to README.md instructions
2015-09-03 18:02:15 +02:00
Billy Kozak
b71353181d
CC26xx - enable correct IRQ in rf_core_cmd_done_en
...
Fix for #1229
rf_core_cmd_done_en() was enabling the wrong irq for detecting the
completion of foreground operations. This was causing cc26xx devices
to not wake-up on time when calling lpm_sleep() from transmit().
2015-09-02 12:37:33 -06:00
Adam Dunkels
92c1a68b94
Merge pull request #1215 from joakimeriksson/rpl-child-locking
...
Move locking of neighbors / children from RPL to uip-ds6-route module
2015-09-02 19:42:45 +02:00
Simon Duquennoy
10395fffde
Merge pull request #1230 from simonduq/fix-wismote-random-init
...
Fix Wismote randon_init for link-layer addresses shorter than 8 bytes
2015-09-02 17:44:57 +02:00
Adam Dunkels
8d2dafbe30
No need to set the same channel again
2015-09-02 12:18:27 +02:00
Adam Dunkels
27e373492d
Turn off energest listen in off()
2015-09-02 12:10:44 +02:00
Adam Dunkels
f1c4a5ee08
Turn off radio again after transmitting
2015-09-02 12:10:07 +02:00
