Mariano Alvira
7cdfbb0947
remove cvs keywords from cpu/mc1322x
2011-02-17 14:36:55 -05:00
maralvira
ce92a90e58
new timer setup routines.
2011-01-17 15:51:19 +00:00
maralvira
b3c8c14b7d
add timer setup routines
2011-01-17 15:51:02 +00:00
maralvira
ca098db611
fix a race condition regarding advancement of the softclock. Without
...
this, the advancment would fail to trigger a tx cycle
occasionally. This would cause the packet to get deferred until the
next expiration of the softclock.
2011-01-17 15:49:17 +00:00
maralvira
9b2a2bb5e6
fix up stdint include
2010-11-10 22:12:29 +00:00
maralvira
6da84819dd
use stdint.h instead of custom types.h
...
stdint.h is more portable across compilers
2010-11-10 22:06:28 +00:00
maralvira
77cf0f0f5e
update ring_osc_on and _off to the new bit structs
2010-11-07 14:42:31 +00:00
maralvira
dab7faf13c
Add gpio_set and gpio_reset
...
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
2010-11-07 14:29:04 +00:00
maralvira
4a4a39c84a
Name the GPIO structure so we can set multiple bits at once
2010-11-07 14:28:30 +00:00
maralvira
65d3942c76
Add the disable_int({}) macro
...
This is similar to safe_irq_enable and disable
2010-11-07 14:26:24 +00:00
maralvira
83e6995af1
Add TMR_ADDR helper
2010-11-07 14:25:07 +00:00
maralvira
d930ce0e2b
Add some useful timer macros
2010-11-07 14:24:36 +00:00
maralvira
5e00219a9c
Register definitions: get rid of some macro magic that doesn't help much
...
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
2010-11-07 14:24:11 +00:00
maralvira
091e4cd84e
Add structure-based ITC access
2010-11-07 14:23:15 +00:00
maralvira
11ac20a361
REF_OSC is a 32-bit number, not 64-bit number
2010-11-07 14:22:51 +00:00
maralvira
745e7b5ac2
Add cal_isr() support
2010-11-07 14:21:59 +00:00
maralvira
ab84453401
Add structure-based CRM definitions
2010-11-07 14:21:33 +00:00
maralvira
9d072d5309
Add macro to help compute TMR.ENBL values (useful when using #defined
...
values to represent timers)
2010-11-07 14:21:06 +00:00
maralvira
85e6b06175
Add pin definitions for each timer, they're fixed
2010-11-07 14:19:17 +00:00
maralvira
3726588f02
Add structure-based GPIO register definitions
2010-11-07 14:17:45 +00:00
maralvira
20b477db13
Add structure-based timer register definitions
2010-11-07 14:17:20 +00:00
maralvira
c71a0243ff
Add missing type for TMR0_COMP2
2010-11-07 14:16:28 +00:00
maralvira
f1fede7090
get LQI of received packets
2010-11-07 14:06:57 +00:00
maralvira
ae0b7f846f
Fix the CNTR defines.
...
Thanks to Ruslan for finding this.
2010-11-07 14:04:59 +00:00
maralvira
df9d43ab83
increase the reception time now that tx_packet will advance the timer
...
as necessary.
2010-07-28 18:49:34 +00:00
maralvira
a3b9c2adb0
in tx_packet, force an interrupt if the maca isn't doing anything so
...
that the transmit starts. Or if the maca is in a reception cycle,
advance the softclock timeout to now so that transmission starts as
soon as possible (immediately if a packet isn't being received or
right after reception finishes).
2010-07-28 18:48:03 +00:00
maralvira
593a50c38f
make the debug prints in check_maca more specific
2010-07-28 18:47:35 +00:00
maralvira
422d05003f
use 32 packets in the pool by default
2010-07-28 18:47:05 +00:00
maralvira
5b44d6a29a
properly drop characters when buffer is full
...
fix by David Kopf
2010-07-06 13:39:34 +00:00
maralvira
419906a769
initial mc1322x commit
...
based on commit aac3a355451d899f02737f2907af8c874ee4feba of
git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-10 14:55:39 +00:00
