Commit graph

40 commits

Author SHA1 Message Date
adamdunkels 73f5535754 Made the guard time slightly more conservative - found an occasion where this was needed 2010-10-24 21:06:17 +00:00
adamdunkels 9cb830ed37 Timing bugfix in the waiting period between channel samples to check if the coast is clear before sending a packet. 2010-10-20 22:25:24 +00:00
adamdunkels ceebd7020a Bugfix: the return value sometimes was wrong when a collision was detected. 2010-10-03 20:39:24 +00:00
adamdunkels 3c735fcea4 Added a packetbuf flag that indicates if the link layer acks should be used or not 2010-04-30 07:25:51 +00:00
nifi 85d6f6c514 removed unused variable 2010-04-26 22:41:50 +00:00
nifi b26f45a35b code cleanup 2010-04-26 17:55:11 +00:00
nifi d761b6e89a Added MAC header to handle padding 2010-04-26 17:46:21 +00:00
nifi 14b1bb9f57 Fixed to only use leds when DEBUG is set 2010-04-20 11:41:16 +00:00
adamdunkels 3670fac618 Bugfix: timing fixed 2010-04-08 18:23:24 +00:00
adamdunkels 91ff8574ad Improved handling of duplicate packets 2010-04-08 09:32:56 +00:00
adamdunkels 497111bcc9 Added an optional rate limit for broadcast transmissions 2010-04-06 11:57:43 +00:00
adamdunkels e06a30fdb0 Added MAC-layer duplicate message suppression, which is very helpful when running with duty cycling turned off 2010-04-05 19:28:07 +00:00
adamdunkels a4c328785a Small timing tweaks 2010-04-04 21:01:24 +00:00
adamdunkels 62039a530d Removed non-existant cooja-debug.h include 2010-04-04 12:31:47 +00:00
adamdunkels 7d6ff0289e Fiddled more with the timing: the phase seems stable now at least. Still bugs left though... 2010-04-04 12:28:29 +00:00
adamdunkels be117afe04 After a lot of tweaking and twiddling with the timing of the ContikiMAC code and the mechanisms in the CC2420 driver, things seem to work somewhat stable now - knock on wood! 2010-04-04 07:49:30 +00:00
adamdunkels 121ca946e1 Improved phase lock behaviour when neighbor is not duty cycling: senders notify receivers via the 802.15.4 pending bit that they are not duty cycling. Neighbors then will start sending packets immediately and not wait for neighbors' phase. Tweaking of ContikiMAC timers to make it more reliable. 2010-04-03 13:28:30 +00:00
joxe 6ae86d001d made number of phase neighbors configurable 2010-04-01 17:17:36 +00:00
adamdunkels add426de4b Bugfixed stream mode: node listens 100% for 0.5 seconds in stream mode. Naming change: is_listening changed is_snooping. 2010-04-01 10:02:04 +00:00
adamdunkels b43f7830b3 Fine-tuned the timing and phase lock optimization 2010-03-31 20:27:15 +00:00
adamdunkels 877eb2fbe9 Fiddled with the timing 2010-03-31 11:54:38 +00:00
adamdunkels bcfa80102d Had previously not included the waiting time that the CC2420 introduces when sending a packet. Also increased the smallest packet size, just to be on the safe side. 2010-03-30 23:01:32 +00:00
adamdunkels 226abb8ec3 Removed non-existant include file 2010-03-29 22:10:03 +00:00
adamdunkels 9c58768b59 Extend packet size after creating 802.15.4 header; prepare radio chip with packet before waiting for neighbor phase to make phase wait time deterministic 2010-03-29 21:51:36 +00:00
adamdunkels 49009e9cbd Extend the length of announcement packets if they are too short 2010-03-19 13:24:58 +00:00
adamdunkels 115b3a7c5c Minor timing bugfix: the time between channel checks should not include the time required for the channel check itself 2010-03-17 18:24:06 +00:00
adamdunkels efeb9944fa Increase the required non-activity periods before turning off the radio; remove the strict phase requirement (which messes up things with low-power streaming) 2010-03-17 16:35:52 +00:00
adamdunkels b1feac5a00 Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100% 2010-03-16 18:11:13 +00:00
adamdunkels 7bab9316da Two major changes:
* Low-power streaming. Experimental support for a low-power mode which
  allows rapid exchange of packets with a 16% duty cycle. Does not
  seem to function correctly yet though.

* Phase locking. When the phase of a neighbor has been detected, the
  sender assumes that the neighbor will keeps it phase and does not
  send more strobes than necessary to hit the receiver's channel
  check - even if the receiver does not acknowledge the reception of
  the strobes when it should have been awake. Instead, the sender
  stops strobing and tries again at a later time.
2010-03-14 22:59:23 +00:00
oliverschmidt def540e6c0 Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments.
There were btw other even longer lines with expansions of the same macro already present.
2010-03-14 12:13:54 +00:00
adamdunkels d0e6436a20 Don't call up the netstack if the transmission was deferred 2010-03-09 20:37:02 +00:00
adamdunkels 79722b4247 Rework of the timing conditions of ContikiMAC: the old timing did not work well on real hardware, the new one seems to work better 2010-03-09 13:19:05 +00:00
nifi 5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
adamdunkels 410d860a93 Improved handling of neighbor phase estimation: instead of busy-waiting while waiting for neighbor's phase, the new code schedules a timer just before neighbor wakes up 2010-02-28 20:19:47 +00:00
adamdunkels ed88f487c8 Improved detection of link-layer ACKs; increased the time ContikiMAC waits when it has detected a link-layer ACK; increased the number of silence periods required to detect a CCA false positive 2010-02-28 08:33:21 +00:00
nifi c20047f657 Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration. 2010-02-23 20:09:11 +00:00
adamdunkels ed52586e18 Rework of parts of the ContikiMAC code based on input from experimental results. When channel check is triggered because of a false positive, the new version checks the radio several times to make sure that there really is an incoming packet. Otherwise, the radio is switched off. Cleaned up and removed old unused code. Added a few temporary debugging mechanisms and functions. 2010-02-23 18:49:05 +00:00
adamdunkels 0b2b7bcdba Removed inadvertedly left-over include file 2010-02-18 23:52:34 +00:00
adamdunkels e34eb54960 A work-in-progress rework of the Contiki MAC and radio layers. The
main ideas are:

* Separates the Contiki low-layer network stack into four layers:
  network (e.g. sicslowpan / rime), Medium Access Control MAC
  (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
  radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
  that specify what mechanism/protocol/driver to use at the four
  layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
  NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
  the fate of a transmitted packet: if the packet was not possible to
  transmit, the cause of the failure is reported, and if the packets
  was successfully transmitted, the number of tries before it was
  finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
  which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
  efficient radio duty cycling protocols: channel check, pending
  packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
  #defines.
2010-02-18 21:48:39 +00:00
adamdunkels f8c804e28b ntikiMAC: a new radio duty cycling mechanism that uses a combination
of link-layer and MAC-layer mechanisms to achieve a very low power
consumption: during idle listening the radio is switched off between
99.2% and 99.6% of the time. One unicast transmission typically adds
between 0.07% and 1.2% additional radio time, depending on packet
size.

ContikiMAC uses the standard IEEE 802.15.4 message format and adds no
additional headers.

ContikiMAC is simple: it uses periodic two-shot channel sampling
during idle listening to keep the radio on-time down. Transmissions
are done with repeated transmissions until a link-layer ACK is
received.
2010-02-18 21:26:15 +00:00