nvt-se
30f5e29db7
dos2unix conversion
2011-01-05 17:01:03 +00:00
joxe
65048c519c
removed some void * casts in uip code
2011-01-04 22:11:37 +00:00
nvt-se
7a43b7d832
Configuration of the objective function made easier. Updated OF0 to the new rank calculation.
2011-01-04 20:43:28 +00:00
joxe
b2296e462b
removed void * + changed ux_t to uintx_t
2011-01-04 20:22:21 +00:00
dak664
3c3cd868cd
Allow shorter UIP_CONF_WAIT_TIMEOUT for more aggressive power saving modes.
2010-12-24 00:39:04 +00:00
dak664
322d835fee
Fix avr-gcc compiler warnings
2010-12-18 22:12:53 +00:00
nvt-se
8f76c82433
Improved DAO management.
2010-12-17 15:24:25 +00:00
adamdunkels
4914739e5d
Revived the timesynch module, which has been switched off since the introduction of the new radio API after Contiki 2.4. The new code uses explicit timestamp messages instead of piggybacking timestamps on every transmission. It is also significantly better in terms of exactness.
2010-12-16 22:47:38 +00:00
adamdunkels
10fb99a89d
Reduced the value of the max depth, so that a count-to-infinity loop will not count too long before hitting the maximum value. This is important when a network loses its sink, so that packets are not forwarded around the network for ever.
2010-12-16 22:46:34 +00:00
adamdunkels
19e930e6f2
Changed the behaviour of retransmissions to work better with the in-order CSMA code. The retransmission timer is now set when the packet is known to be sent by the MAC layer.
2010-12-16 22:45:15 +00:00
adamdunkels
4a89cc9db3
Rework of the new CSMA in-order code that fixes a number of smalllish bugs in the in-order code.
2010-12-16 22:44:02 +00:00
adamdunkels
79f2c25dae
Rework of the phase-lock optimization mechanism. There were several bugs in the existing code, such as the phase-lock would lose synchronization when a packet was lost.
2010-12-16 22:43:07 +00:00
adamdunkels
01c28ab502
Added explicit timestamp packet type, for the revived timesynch support
2010-12-16 22:41:43 +00:00
nvt-se
dae3dc22f3
Corrected a comment that was accidentally overwritten in a previous commit
2010-12-15 19:57:40 +00:00
nvt-se
cd08939b38
Corrected the reported ETX in the initial callback, and fixed the coding style
2010-12-15 14:35:07 +00:00
nvt-se
79ae813f88
Improved macro definitions and removed obsolete declarations.
2010-12-15 13:37:34 +00:00
nvt-se
542bbd4b31
Increased the width of dio_next_delay to avoid possible wrappings
2010-12-15 12:24:00 +00:00
nvt-se
486f202d09
Fixed problem with too large values for the DIO timer.
2010-12-15 12:12:27 +00:00
dak664
a026c94467
Fix compiler warnings
2010-12-14 22:45:22 +00:00
dak664
0a4a0ffb32
Add SICSLOWPAN_CONF_ACK_ALL for hardware autoack testing
2010-12-14 22:18:20 +00:00
dak664
240d478c1f
Allow platform to specify COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME
2010-12-14 22:14:33 +00:00
adamdunkels
952dfc9384
Rework of the CSMA layer: instead of using one timer per packet, the module now uses one central timer and a queue of outgoing packets. This helps to keep packets in order, which is extremely useful for TCP transfers, and reduces the amount of congestion since consecutive packets now are spaced in time if there is a collision. Based on the observations and ideas of Simon Duquennoy.
2010-12-14 07:57:14 +00:00
dak664
0e60c99e80
Add defines to set stateful address prefixes.
2010-12-13 23:27:40 +00:00
dak664
9c66df6de1
Fix ancient RAND_MAX compiler warning
2010-12-13 16:52:02 +00:00
joxe
3e293e6cfc
updated rpl dio message format to be compliant with latest version
2010-12-13 10:59:37 +00:00
nvt-se
c9cc87ef25
Added support for Mode of Operation flags in DIOs. Removed obsolete destination advertisement flags.
2010-12-13 10:54:25 +00:00
joxe
b66da85392
fixed comments and initialize flags in dio_output to zero
2010-12-13 09:59:46 +00:00
joxe
aa1795d5c2
removed route annotation from rpl - moved to ds6
2010-12-10 22:48:31 +00:00
joxe
2c30b3c6ba
added annotation for showing routes and default route during simulation
2010-12-10 22:46:58 +00:00
adamdunkels
af21afa750
Make sure that the cycle timing is exact
2010-12-10 13:36:06 +00:00
adamdunkels
e4cf633215
Put parenthesis around user-supplied options. Patch by Roger Larsson
2010-12-07 23:33:17 +00:00
adamdunkels
c19a967973
Bugfix: with the recent bugfixes, it was no longer possible to turn duty cycling back on after it had been turned off
2010-12-07 23:12:54 +00:00
joxe
e1fbb9bba0
changed neighbor state callbacks to occur only at add and remove
2010-12-07 10:36:03 +00:00
nvt-se
b2a28e6fc3
Fixed error reported by Pieter Agten. The reachable time is specified in milliseconds, and must thus be divided by 1000.
2010-12-06 09:48:48 +00:00
adamdunkels
4c9793f428
Let ContikiMAC remember the state that the radio should have when duty cycling is turned off. This fixes a bug in which the radio was turned on after sending, even when NETSTACK_RDC.off(0) was enabled.
2010-12-06 09:08:22 +00:00
dak664
f34e5ec798
Convert implicit printf to PRINTF
2010-12-04 21:06:04 +00:00
dak664
e54d7d6f9c
Fix compiler warnings
2010-12-02 15:55:17 +00:00
adamdunkels
6d556d5c13
Fixed bug with link-layer ACKs. Refactored the ACK reception code.
2010-11-25 08:44:34 +00:00
adamdunkels
2f66db3ded
Added a debug mode that keeps track of where individual queuebufs are allocated, which is useful when debugging queuebuf leakage problems.
2010-11-25 08:43:59 +00:00
nifi
3bd78893e5
Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc.
...
nullrdc (previously nullrdc-framer) is now a RDC implementation that
does not do any radio duty cycling but supports link layer addresses
and frame format via framer (for example 802.15.4). nullrdc can now be
used in the same way as contikimac, xmac, etc.
nullrdc-noframer (previously nullrdc) is a null RDC implementation
that does not do any radio duty cycling, does not add any header of its
own to the packets, and does not support link layer addresses.
2010-11-23 18:11:00 +00:00
dak664
62d7832fff
Fix compiler warning and possible bug
2010-11-13 16:37:42 +00:00
nifi
05d78522d3
Added MAC-layer duplicate message suppression when using 802.15.4 auto ack
2010-11-12 12:53:16 +00:00
adamdunkels
8f745a6ea6
Added a function for obtaining the current parent
2010-11-06 14:32:10 +00:00
adamdunkels
9750eb93bf
Turn off debug messages
2010-11-03 15:41:23 +00:00
adamdunkels
a891a2ffe8
Bugfix: allow ICMPv6 to send packets larger than those whose length fits in one byte. Bugfix by mathieupouillot
2010-11-03 11:56:11 +00:00
adamdunkels
b7df18a96a
Turned off streaming by default to save code space; made guard time a little more conservative
2010-11-02 11:00:08 +00:00
adamdunkels
1b5001b226
Bugfix: out-of-order fragments were not handled correctly. minor style fixes
2010-11-02 10:56:57 +00:00
adamdunkels
5230e64112
Use the new shared ND-packet queue buffers
2010-10-29 05:36:07 +00:00
joxe
9a1f902881
made rank use full resolution when using OF-ETX
2010-10-28 20:39:06 +00:00
adamdunkels
f5031861ac
When IPv6 ND kicks in, the packet that caused the ND can either be dropped or saved in a buffer to be send when the NS reply returns. This commit reimplements the buffer management to avoid having one buffer per neighbor, but instead use a buffer pool from which buffers can be allocated for different neighbors.
2010-10-28 15:42:56 +00:00
adamdunkels
677575fc8c
Rewrote proactive link estimator to be invoked randomly instead of triggered by an empty queue; this makes network bootups because nodes are not synchronized
2010-10-28 15:36:02 +00:00
joxe
932fed8cc7
improved ETX calculation
2010-10-28 08:54:54 +00:00
nifi
25ceab07d2
Update annotation when removing preferred parent.
2010-10-27 12:27:57 +00:00
nifi
d2a3f1f257
We found that the preferred parent should be reset in the rpl_remove_parent function.
2010-10-27 12:20:35 +00:00
nvt-se
d528039f9a
Created a separate function for local repair. Added a statistics structure. Improved the control of malformed packets.
2010-10-27 00:46:40 +00:00
nvt-se
c2c0505402
Increased alpha to 85 in order to get slower changes in the ETX. Put back the start guess to 3.
2010-10-27 00:45:24 +00:00
joxe
43023ab425
made number of transmissions configurable
2010-10-26 13:25:32 +00:00
nvt-se
1fbc651bf3
Lowered the first guess for the ETX of a link.
2010-10-25 20:06:17 +00:00
nvt-se
127c87efcc
Fixed debug printfs. Added control of max_rankinc parameter.
2010-10-25 20:03:37 +00:00
nvt-se
19d7543267
Added detection of loops in DAO forwarding.
2010-10-25 19:49:12 +00:00
adamdunkels
9ecc0437f4
Left-over debug printf removed
2010-10-25 12:25:39 +00:00
adamdunkels
42f37ca1d3
Bugfix: removed old leftover code statement
2010-10-25 11:59:09 +00:00
adamdunkels
3bbd6a00a9
Replace old neighbors according to an LRU policy when a new neighbor needs to be added
2010-10-25 11:58:07 +00:00
adamdunkels
e680276954
ARP fix for multicast transmissions. (Patch by Robert Quattlebaum.)
2010-10-24 22:29:39 +00:00
adamdunkels
a8848517dd
UDP checksum is mandatory with IPv6. (Patch by Robert Quattlebaum.)
2010-10-24 22:28:43 +00:00
adamdunkels
77ecfb0366
Rewrote parts of the retransmission logic so that collect is robust against the situation where the MAC layer will fail to callback after a packet has been transmitted.
2010-10-24 21:08:19 +00:00
adamdunkels
8fa7bf6c31
Always restore the queuebuf to the packetbuf before calling the upper layers. Reduce the waiting time between successive MAC layer retransmissions.
2010-10-24 21:07:00 +00:00
adamdunkels
73f5535754
Made the guard time slightly more conservative - found an occasion where this was needed
2010-10-24 21:06:17 +00:00
adamdunkels
8f8741c7f0
Small style fixes
2010-10-24 21:05:42 +00:00
nvt-se
00a000cca0
Print the rank correctly in the debug output.
2010-10-22 15:40:10 +00:00
nvt-se
86823a84fb
Export fix-point representation of the ETX. Make RPL temporarily use the same representation as before.
2010-10-22 13:50:13 +00:00
joxe
804d23e9f4
made DIS Interval configurable
2010-10-22 13:13:40 +00:00
joxe
e414c8c5a4
added function for retrieving link etx to neighbor
2010-10-22 11:34:24 +00:00
nvt-se
6e28b1d3fb
Reduced ETX_LIMIT in order to avoid overflows. Removed ETX_LOSS_PENALTY and set packet_etx to ETX_LIMIT instead upon packet loss.
2010-10-21 19:46:21 +00:00
adamdunkels
9cb830ed37
Timing bugfix in the waiting period between channel samples to check if the coast is clear before sending a packet.
2010-10-20 22:25:24 +00:00
adamdunkels
3ffcff0656
Added mechanisms for explicit de-synchronization of synchronized neighbors. Added link-layer ACKs. Fixed bugs with MAC-layer interaction. Now seems to work somewhat (didn't work at all before, in some cases), but there are still problems with packet loss.
2010-10-20 15:23:43 +00:00
adamdunkels
5585d72c86
A simple but substantial change: uIP used the htons()/HTONS() macro
...
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.
This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
adamdunkels
34cba78ca8
Bugfix: bump advertisements only when a parent changes, not because of an upstream parent change
2010-10-19 07:34:29 +00:00
nifi
e2b4956a7f
Bug fix: release the packet and notify the sender if RDC returned an error
2010-10-14 19:08:39 +00:00
oliverschmidt
2f89e69ff7
Fixed build for platforms which use the default value for QUEUEBUF_NUM.
2010-10-12 19:51:28 +00:00
adamdunkels
020da4e8ba
Added a function for obtaining beacon intervals
2010-10-11 23:44:24 +00:00
adamdunkels
ec716ea62d
Do not reduce transmission interval, unless explicitly told so with the bump flag
2010-10-11 23:43:01 +00:00
adamdunkels
37adf130b4
Rewrite of the congestion logic. A node now report it being congested
...
when half the transmission queue is full. When a neighbor is heard to
be congested, the rtmetric of that node is inflated to avoid sending
more traffic in its direction.
Fixed problems with beacon intervals: intervals are now not reduced
when a path gets significantly worse, only when they get better.
2010-10-11 23:42:01 +00:00
adamdunkels
d821ba5e22
Added a lifetime for link estimates: if they are too old, they are
...
reset so that a new probing period can produce more up-to-date
estimates. Added a congestion mechanism whereby a neighbor can be
marked as being congested for a period of time, during which the ETX
for the neighbor will be artificially inflated.
2010-10-11 23:38:46 +00:00
adamdunkels
5eb4a0fe8d
Rewrote the initial link estimate logic: link estimates are now
...
computed only over the actual samples, not over the entire
buffer. Also, the initial link estimate is much more conservative now
(16 transmissions) to favor links that have been probed, and which
therefore are likely to have better ETXs.
2010-10-11 23:34:02 +00:00
adamdunkels
0cabe483c3
Don't call sink recv function for zero-size packets, since these most likely are link estimate probes or keepalive packets. Explicitly set eseqno to zero when opening a new connection.
2010-10-07 15:52:28 +00:00
adamdunkels
ad35c54473
Bugfix: when a node's rtmetric was lower than SIGNIFICANT_RTMETRIC_PARENT_CHANGE, its beacon timers would always be bumped to its lowest value
2010-10-05 20:06:47 +00:00
adamdunkels
52e9a6f1fb
Turned the DRAW_TREE debug flag off by default
2010-10-04 22:36:47 +00:00
adamdunkels
65d640ac53
Several bugfixes to the proactive link estimate maintenance code, which is now enabled by default. Simplified DRAW_TREE code for drawing routing graph in Cooja. Added routing metric penalty to parents that are congested or that drop packets.
2010-10-04 20:27:50 +00:00
adamdunkels
212e73faa6
Removed old netsim code. Added a function for obtaining the packet attributes of a queuebuf packet.
2010-10-04 20:26:01 +00:00
joxe
4f3fc1c404
fixed xmac to use new channel check define name
2010-10-03 22:46:53 +00:00
adamdunkels
ceebd7020a
Bugfix: the return value sometimes was wrong when a collision was detected.
2010-10-03 20:39:24 +00:00
adamdunkels
ae88ed04f1
Moved the definition of the channel check rate used by the radio duty
...
cycling layer. This definition was previously held in net/mac/mac.h,
with the name MAC_CONF_CHANNEL_CHECK_RATE. But since the rate is used
by the radio duty cycling layer, it makes more sense to change its
name to reflect this. Also, the configuration option should be tied to
the netstack configuration instead.
So the new configuration option is called
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE.
2010-10-03 20:37:32 +00:00
adamdunkels
40583fe112
Removed the polite announcement code, since it was not used, and enabled the broadcast announcement code by default. Increased the default intervals for broadcast announcements.
2010-10-03 20:10:22 +00:00
adamdunkels
605392522f
Bugfixes and improvements: rtmetrics are now 16-bit clean. Added experimental feature that proactively probes neighbors that have not yet been tried out, in order to get an initial ETX for them.
2010-10-03 20:08:44 +00:00
adamdunkels
d0579c8a81
Cleaned up the collect neighbor management code
2010-10-03 20:07:10 +00:00
adamdunkels
b23a364397
rtmetric values should always be computed as 16-bit values
2010-10-03 20:06:25 +00:00
adamdunkels
32ba90ea4c
Bugfix: make sure that neighbor exists before attempting to update tx
...
count.
2010-09-28 06:53:02 +00:00
joxe
77c5187a2e
fixed bug where context is null but still referenced
2010-09-23 19:57:50 +00:00
joxe
494d2a3073
only compare with global addresses when selecting source for a specific destination
2010-09-23 18:17:27 +00:00
