nvt-se
37fa4da899
support 9600 baud
2008-09-19 12:18:04 +00:00
nvt-se
44c93fcd93
cleared lock semantics
2008-05-28 13:17:08 +00:00
nvt-se
fed62e1642
added timeout
2008-05-27 14:22:55 +00:00
nvt-se
07f8875963
added missing header
2008-05-27 14:05:09 +00:00
nvt-se
f2c6f77f7d
removed debug print
2008-05-27 14:04:15 +00:00
nvt-se
ce84dce702
reset locks on forced mode switch
2008-05-27 13:05:52 +00:00
nvt-se
9c9c2573c3
lock UART for RS232 in putchar
2008-05-27 13:03:19 +00:00
nvt-se
bff587e32c
lock SPI bus when erasing
2008-05-27 13:01:27 +00:00
nvt-se
acf01a0c58
fixed compilation error.
2008-03-31 14:32:00 +00:00
nvt-se
067e4c3c06
include contiki-conf.h for type definitions.
2008-03-31 13:48:03 +00:00
nvt-se
f7b3d9fc99
moved files to sd/
2008-03-31 13:45:52 +00:00
nvt-se
2822ff7ddb
made more conform with contiki indentation.
2008-03-28 23:03:05 +00:00
nvt-se
10cabda581
lock wait function from Michael Baar.
2008-03-28 16:06:28 +00:00
nvt-se
6486460e3f
locking bugfix from Michael Baar.
2008-03-28 15:59:58 +00:00
nvt-se
3fec8ee5e7
synced with newer version by Michael Baar.
2008-03-28 15:58:43 +00:00
nvt-se
5631c92416
use three different input channels for the accelerometer.
2008-03-27 13:04:59 +00:00
nvt-se
1d3bae48dd
added sd card support.
2008-02-28 15:49:01 +00:00
nvt-se
2cc0135e35
cleaned up and fixed an error checking problem in the locking code.
2008-02-28 15:11:22 +00:00
nvt-se
f0891be218
added clear channel assessment timeout. long to begin with.
2007-12-20 14:44:31 +00:00
fros4943
d0997c2dab
major bugfix: padding synch with zero
2007-12-20 13:36:59 +00:00
nvt-se
abb2731ed7
corrected comparison when bits don't need shifting.
2007-12-20 10:48:01 +00:00
nvt-se
7a6a9e62e4
improved logic.
2007-12-19 13:25:41 +00:00
nvt-se
1f00c20815
state variable must be volatile.
2007-12-19 13:09:01 +00:00
nvt-se
b4a8641dda
removed printf's.
2007-12-18 15:27:43 +00:00
nvt-se
f9d24f0d24
Wake up from sleep in the interrupt when the receiver process is going
...
to be polled.
2007-12-18 15:26:25 +00:00
nvt-se
ab115e4b10
Removed deprecated function.
2007-12-17 20:18:29 +00:00
nvt-se
1566f55e04
use smaller payload buffer size and provision for synchronization word in
...
the total buffer.
2007-12-17 20:15:53 +00:00
nvt-se
bcefffb0e7
set ev to valid value.
2007-12-17 18:48:50 +00:00
nvt-se
004143b6b8
set rxlen to zero before enabling interrupts.
2007-12-17 16:37:15 +00:00
nvt-se
2288cdecbb
small cleanup.
2007-12-17 16:23:32 +00:00
fros4943
479d74ce6a
added receiver process outside interrupt
2007-12-17 15:53:57 +00:00
nvt-se
5f1ca4ccdf
use synchronous transmission.
2007-12-17 15:26:47 +00:00
nvt-se
2a0351afb4
improved uip support and cleaned up the source.
2007-12-17 13:33:09 +00:00
nvt-se
665c58fd2a
Contributions from Michael Baar:
...
CC1020
o Turns off only after transmission has ended and not in between
o Using events for DMA takes too long. It should use a callback when
DMA finishes to turn off the transmit mode as early as possible.
Core/UART
o Added profiling and energest initialization
o Changed low-power mode from LPM1 to LPM3
2007-12-13 12:51:38 +00:00
nvt-se
486ea95b4f
Limited support for energy estimation.
2007-12-10 12:49:08 +00:00
nvt-se
46b6ce9193
Conform to the radio_driver interface.
2007-11-18 12:25:22 +00:00
nvt-se
c90a758ac5
Detect if the medium is busy right before sending.
2007-11-12 21:17:47 +00:00
nvt-se
0e4429068b
Added a carrier sensing function.
2007-11-07 15:34:41 +00:00
nvt-se
ee59f1fe34
Use a fresh RSSI value in the read function.
2007-11-07 15:26:00 +00:00
nvt-se
a604013a88
Added more flags for the status register.
2007-11-07 15:23:35 +00:00
nvt-se
366d845336
DMA destination is now given as a parameter instead of being hardwired.
2007-11-06 15:08:55 +00:00
nvt-se
045225fa05
Made driver less platform-dependent and added support for msb-430.
2007-10-22 12:19:58 +00:00
nvt-se
2d0225b0e4
Safeguard for invalid packets.
2007-10-04 10:02:08 +00:00
nvt-se
fb9b800c53
More clear power down procedure. Now it is required that cc1020_on
...
is called before anyone can send after the power down.
2007-10-02 14:05:45 +00:00
nvt-se
4e8bdb1c08
Power managment is handled by another layer.
2007-10-01 11:59:36 +00:00
nvt-se
c0686e80f1
Added definitions for the MAIN register.
2007-10-01 11:56:49 +00:00
nvt-se
24ffa8cfaf
support third DMA line.
2007-09-21 13:51:09 +00:00
nvt-se
6955e028da
Use splhigh and splx.
2007-09-14 19:20:54 +00:00
nvt-se
290f41db06
better comments.
...
enable interrupt later.
2007-09-14 19:20:24 +00:00
nvt-se
ca733ddfce
Added some statistics.
2007-09-14 19:14:54 +00:00
