nvt-se
0f6954cc43
added test options for stressing the card and for switching blocks randomly.
2009-05-26 13:00:37 +00:00
nvt-se
28619eabc0
bug fix with sdspi select.
...
code style fixes.
2009-05-26 13:00:07 +00:00
nvt-se
e9d279620f
more protection against interrupts that might spoil SPI sequences.
...
made coding style more like that of contiki.
2009-05-26 12:15:46 +00:00
nvt-se
09a1c115fe
initial test port of Coffee for the MSB-430 platform.
2009-05-25 14:14:32 +00:00
nvt-se
8f7f7fb896
enabled random I/O in the SD driver.
2009-05-25 14:13:47 +00:00
nvt-se
da91d87ae6
switch of interrupts while writing and reading to the SPI. avoids
...
desynchronization problems.
2009-05-25 13:19:04 +00:00
nvt-se
bcc5084564
removed delay because while loop waits until completion anyway.
2009-05-15 13:54:08 +00:00
nvt-se
f9b35795c7
minor refactoring.
2009-05-14 12:18:49 +00:00
nvt-se
172ffb74c7
fix compiler warnings. patch from Jesper Karlsson.
2009-04-08 14:56:00 +00:00
nvt-se
e90149b7b4
avoid switching mode when tx or rx is active.
...
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
2009-03-30 14:07:34 +00:00
nvt-se
04bd414e1c
enabled LPP by default.
2009-03-26 12:51:55 +00:00
nvt-se
90b9b9bae3
configure LPP parameters with slightly longer listen time since the CC1020
...
driver switches from TX mode to RX mode rather slowly.
decreased CCA check timeout.
2009-03-26 12:47:12 +00:00
nvt-se
25cc327acc
avoid hanging in TX mode after CCA check failed.
...
minor memory savings.
2009-03-25 15:25:05 +00:00
nvt-se
96fbf3b853
use old style C comments.
...
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
2009-03-24 15:32:26 +00:00
nvt-se
15c447e57e
remove some unnecessary instructions and function calls. patch from Jesper Karlsson.
2009-03-24 15:13:11 +00:00
nvt-se
143c7f9cea
switched from serial to serial_line. patch from Jesper Karlsson.
2009-03-24 15:02:03 +00:00
nvt-se
6b22fa60e8
- avoid costly rx state initialization if the radio is already on.
...
- code formatting.
2009-03-19 14:43:31 +00:00
nvt-se
8f85355f02
print the MAC protocol name when starting the node
2009-03-19 14:14:06 +00:00
nvt-se
b9ef907690
enable serial line tools using the same commands as the sky platform's Makefile
2009-03-17 22:27:14 +00:00
nvt-se
7e329ab467
removed obsolete file.
2009-03-17 22:20:04 +00:00
adamdunkels
727c5a2dbe
Renamed serial module to serial-line
2009-03-17 20:32:22 +00:00
nvt-se
7f3def31b7
removed duplicate inclusion of header, and sorted the entries.
2009-03-17 15:02:19 +00:00
nvt-se
6d0fc26ec1
disabled unstable SD driver.
2009-03-17 15:01:40 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
nvt-se
80bbc92ffe
patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known
...
in the header.
2009-03-12 12:23:22 +00:00
nvt-se
c148e2e7ea
Do not include codeprop.h by default.
2009-02-23 14:44:26 +00:00
zhitao
5789bf5596
Modified comments for receiver filter bandwidth settings
2009-02-02 08:52:49 +00:00
zhitao
a50d5b701e
direct the UART input stream to the default Contiki serial process
2008-12-09 15:56:39 +00:00
nvt-se
79d4d22ee7
replaced usage of 16-bit rimeaddr field.
2008-12-02 16:00:15 +00:00
zhitao
6b33cf434f
bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead
2008-11-25 16:05:22 +00:00
nvt-se
98a42524d3
minor formatting changes
2008-11-17 16:18:52 +00:00
zhitao
0be308b7ce
changed RSSI samples count to maximum (=16)
2008-11-17 16:14:09 +00:00
nvt-se
90691eb6a2
crc calculation contributed by Carlo Alberto Buano + some refactoring.
2008-11-11 12:24:43 +00:00
nvt-se
1a6c909736
added sd_write declaration.
2008-11-10 14:32:49 +00:00
nvt-se
7ac98ee257
added missing watchdog_periodic
2008-11-04 15:46:59 +00:00
joxe
bc39f2a86c
added get_rssi_packet for getting RSSI from the last packet received
2008-10-29 09:22:39 +00:00
nvt-se
4829ffea50
removed supererogatory file
2008-10-28 14:07:32 +00:00
nvt-se
59012007b9
added an SD example application
2008-10-28 12:56:57 +00:00
nvt-se
1fdb3c21f0
fixed problems with uart and sd cards.
2008-10-28 12:42:53 +00:00
nvt-se
9c3f5beec7
added a small guide.
2008-09-26 18:14:12 +00:00
nvt-se
37fa4da899
support 9600 baud
2008-09-19 12:18:04 +00:00
nvt-se
deefb97c16
Changed clock value so it is a power of two.
2008-08-14 11:11:34 +00:00
nvt-se
f83000af8a
clear bit when uart edge is set.
2008-05-29 22:06:18 +00:00
nvt-se
36fec8dd01
moved sdspi.c to the sd file list.
2008-05-29 22:04:30 +00:00
nvt-se
44c93fcd93
cleared lock semantics
2008-05-28 13:17:08 +00:00
nvt-se
fed62e1642
added timeout
2008-05-27 14:22:55 +00:00
nvt-se
07f8875963
added missing header
2008-05-27 14:05:09 +00:00
nvt-se
f2c6f77f7d
removed debug print
2008-05-27 14:04:15 +00:00
nvt-se
ce84dce702
reset locks on forced mode switch
2008-05-27 13:05:52 +00:00
nvt-se
9c9c2573c3
lock UART for RS232 in putchar
2008-05-27 13:03:19 +00:00
nvt-se
bff587e32c
lock SPI bus when erasing
2008-05-27 13:01:27 +00:00
nvt-se
a26bcf30f7
added SPI parameters.
2008-05-27 12:25:48 +00:00
nvt-se
73978e3133
only include sdspi.h if WITH_SDC is on.
2008-03-31 14:33:23 +00:00
nvt-se
acf01a0c58
fixed compilation error.
2008-03-31 14:32:00 +00:00
nifi
f916c7b130
initialize ctimer after initialization of process
2008-03-31 14:01:26 +00:00
nvt-se
067e4c3c06
include contiki-conf.h for type definitions.
2008-03-31 13:48:03 +00:00
nvt-se
f7b3d9fc99
moved files to sd/
2008-03-31 13:45:52 +00:00
nvt-se
fdcc145150
added missing file.
2008-03-31 13:43:34 +00:00
nvt-se
2822ff7ddb
made more conform with contiki indentation.
2008-03-28 23:03:05 +00:00
nvt-se
10cabda581
lock wait function from Michael Baar.
2008-03-28 16:06:28 +00:00
nvt-se
bd8809d35d
print information about the SD card, if existent.
2008-03-28 16:02:01 +00:00
nvt-se
6486460e3f
locking bugfix from Michael Baar.
2008-03-28 15:59:58 +00:00
nvt-se
3fec8ee5e7
synced with newer version by Michael Baar.
2008-03-28 15:58:43 +00:00
nvt-se
d5c8b18fc2
added accelerometer test with moving average.
2008-03-27 13:08:35 +00:00
nvt-se
5631c92416
use three different input channels for the accelerometer.
2008-03-27 13:04:59 +00:00
nvt-se
1d3bae48dd
added sd card support.
2008-02-28 15:49:01 +00:00
nvt-se
2cc0135e35
cleaned up and fixed an error checking problem in the locking code.
2008-02-28 15:11:22 +00:00
nvt-se
a06b85f74b
adjusted uIP parameters.
2008-02-13 15:41:04 +00:00
oliverschmidt
2632f8f937
Removed finally unnecessary cast.
2008-02-10 22:36:36 +00:00
nvt-se
f0891be218
added clear channel assessment timeout. long to begin with.
2007-12-20 14:44:31 +00:00
fros4943
d8f6f03edc
moving radio init to init-net files
2007-12-20 13:43:24 +00:00
fros4943
d0997c2dab
major bugfix: padding synch with zero
2007-12-20 13:36:59 +00:00
nvt-se
abb2731ed7
corrected comparison when bits don't need shifting.
2007-12-20 10:48:01 +00:00
nvt-se
7a6a9e62e4
improved logic.
2007-12-19 13:25:41 +00:00
nvt-se
1f00c20815
state variable must be volatile.
2007-12-19 13:09:01 +00:00
nvt-se
b4a8641dda
removed printf's.
2007-12-18 15:27:43 +00:00
nvt-se
f9d24f0d24
Wake up from sleep in the interrupt when the receiver process is going
...
to be polled.
2007-12-18 15:26:25 +00:00
fros4943
d21572da02
configurable port
2007-12-18 11:55:01 +00:00
nvt-se
ab115e4b10
Removed deprecated function.
2007-12-17 20:18:29 +00:00
nvt-se
1566f55e04
use smaller payload buffer size and provision for synchronization word in
...
the total buffer.
2007-12-17 20:15:53 +00:00
nvt-se
bcefffb0e7
set ev to valid value.
2007-12-17 18:48:50 +00:00
nvt-se
004143b6b8
set rxlen to zero before enabling interrupts.
2007-12-17 16:37:15 +00:00
nvt-se
2288cdecbb
small cleanup.
2007-12-17 16:23:32 +00:00
nvt-se
2d5f331b34
new line.
2007-12-17 16:20:34 +00:00
fros4943
479d74ce6a
added receiver process outside interrupt
2007-12-17 15:53:57 +00:00
fros4943
7886d51045
removed old dma_init
2007-12-17 15:47:55 +00:00
fros4943
3936e0c275
updated version
2007-12-17 15:47:40 +00:00
nvt-se
5f1ca4ccdf
use synchronous transmission.
2007-12-17 15:26:47 +00:00
nvt-se
2a0351afb4
improved uip support and cleaned up the source.
2007-12-17 13:33:09 +00:00
nvt-se
86ce511469
Separate files for network initialization.
2007-12-17 13:20:54 +00:00
fros4943
4da695ce72
bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise
2007-12-17 11:23:57 +00:00
nvt-se
6a42706847
removed duplicate.
2007-12-17 11:15:21 +00:00
nvt-se
a305e3ccbb
removed lpm_on.
2007-12-17 11:14:28 +00:00
fros4943
3969ea6f9d
not using usb port to program the msb
2007-12-17 11:10:45 +00:00
nvt-se
54bef4bea3
added back initializations that were missing in the previous commit.
2007-12-13 13:10:02 +00:00
nvt-se
665c58fd2a
Contributions from Michael Baar:
...
CC1020
o Turns off only after transmission has ended and not in between
o Using events for DMA takes too long. It should use a callback when
DMA finishes to turn off the transmit mode as early as possible.
Core/UART
o Added profiling and energest initialization
o Changed low-power mode from LPM1 to LPM3
2007-12-13 12:51:38 +00:00
nvt-se
b1d87bf0d3
Removed deprecated rules.
2007-12-13 11:29:12 +00:00
nvt-se
486ea95b4f
Limited support for energy estimation.
2007-12-10 12:49:08 +00:00
nvt-se
46b6ce9193
Conform to the radio_driver interface.
2007-11-18 12:25:22 +00:00
nvt-se
c90a758ac5
Detect if the medium is busy right before sending.
2007-11-12 21:17:47 +00:00
