Oliver Schmidt
c25e965b0c
Avoid unnecessary key presses.
...
The recently added doesclrscrafterexit() allows cc65 programs to determine if the screen will be cleared after exit(). If that isn't the case then there's no need to ask the user to press a key in order to allow him to read the final program output.
2016-10-15 15:27:42 +02:00
Harald Pichler
a152a30958
add mac layer security
2016-10-13 12:41:02 +02:00
Harald Pichler
e4ab78369e
initial upload
2016-10-13 12:36:53 +02:00
Simon Duquennoy
14bfaffe00
Merge pull request #1883 from zhitaoh/fix-6LoWPAN-typo
...
fix comment with 6LoWPAN typo and break long lines
2016-10-12 15:05:24 +02:00
Harald Pichler
8f5a033c48
move arduino app code to project
2016-10-12 10:16:41 +02:00
Harald Pichler
548bf32990
initial upload
2016-10-12 10:02:59 +02:00
Oliver Schmidt
957ac63a7c
Improved dicarding of text in the HTML header.
...
Plain text in the HTML header (think of <title>text</title>) is collected as usual. The decision to discard it is triggered by the first withspace following. In the usual case of the <body> no preceeded by any whitespace this means that by the point the first whitespace is encountered we're not in "discard mode" anymore and therefore incorrectly render the text.
Explicitly calling do_word() just before leaving "discard mode" discards all text collected so far.
2016-10-11 11:25:31 +02:00
Oliver Schmidt
72cc19c680
Fixed ProDOS 800kB image.
...
The 800kB file claimed to be a 32MB image. Now the logical size and pysical size match.
2016-10-11 11:18:23 +02:00
Harald Pichler
e410b2ddd2
add WCHaracter
2016-10-07 15:29:03 +02:00
g.oikonomou@bristol.ac.uk
ec4b403e77
Allow and document IEEE mode for CC13xx
2016-10-07 10:05:14 +01:00
Zhitao He
7bb10dc2a0
fix comment with 6LoWPAN typo and break long lines
2016-10-03 15:53:28 +02:00
Harald Pichler
34adab3210
remove redefine routing warning
2016-10-02 22:50:10 +02:00
Harald Pichler
9226facda8
remove warnings
2016-10-02 22:49:22 +02:00
Harald Pichler
fa11a55a45
initial upload
2016-10-02 22:35:56 +02:00
Harald Pichler
5d76c0a6af
add rgb resource
2016-10-02 22:32:58 +02:00
Harald Pichler
dfea93b2ff
add spi and eeprom arduino libs
2016-10-02 18:53:44 +02:00
Antonio Lignan
6157dce0b5
Merge pull request #1877 from alignan/pull/fix-zoul-doc
...
Zoul: updated pin-out images
2016-09-28 23:05:17 +02:00
Antonio Lignan
fd881bec19
Merge pull request #1874 from alignan/pull/zolertia-firefly-reva1
...
Zoul: added new Firefly revision A
2016-09-28 17:01:19 +02:00
Antonio Lignan
1758eaa08c
Zoul: updated pin-out images
2016-09-28 16:54:51 +02:00
Harald Pichler
cfca07489d
coap client test
2016-09-27 18:13:03 +02:00
Nicolas Tsiftes
272c7b92d0
Merge pull request #1875 from mdlemay/fix-dhcp-ipv6
...
galileo: Omit DHCP code when IPv6 is enabled
2016-09-27 17:04:23 +02:00
Harald Pichler
8302b1f762
bugfix constrain return value
2016-09-27 17:03:15 +02:00
Harald Pichler
ee5cd039a1
add ChainableLED
2016-09-27 09:51:26 +02:00
Harald Pichler
a37fd79426
disable mcusleep
2016-09-26 21:06:14 +02:00
Harald Pichler
916bebd102
reduce power consumtion
2016-09-26 21:04:05 +02:00
Michael LeMay
04446e8da5
galileo: Omit DHCP code when IPv6 is enabled
2016-09-24 17:37:07 -07:00
Harald Pichler
ae79061182
bugfix powercyle and sleep mcu timing
2016-09-23 14:59:30 +02:00
Nicolas Tsiftes
ef78b44a86
Merge pull request #1871 from gkelly/fix-rpl-debug
...
rpl: fix debugging PRINTF in find_removable_dio
2016-09-23 13:34:49 +02:00
Simon Duquennoy
75090f648a
Merge pull request #1870 from simonduq/pr/cc1200-1.2kbps
...
CC1200 added config for 1.2 kbps
2016-09-23 13:13:26 +02:00
Antonio Lignan
75e260b2fc
Zoul: added new Firefly revision A
2016-09-23 11:44:33 +02:00
Simon Duquennoy
ba739f679e
cc1200: configurable tx-rx turaround time
2016-09-23 09:41:20 +02:00
Simon Duquennoy
5dd3d03699
cc1200: call watchdog_periodic while in busy-wait
2016-09-23 09:10:42 +02:00
Simon Duquennoy
086499a864
cc1200: added configuration for 868 MHz 2-FSK at 1.2 kbps
2016-09-23 09:06:14 +02:00
Simon Duquennoy
622d576439
cc1200: configure RSSI offset as part of cc1200_rf_cfg
2016-09-23 09:06:13 +02:00
Simon Duquennoy
97843ed322
cc1200: use Hz instead of kHz for channel spacing
2016-09-23 09:06:05 +02:00
Antonio Lignan
e206984d90
Merge pull request #1873 from MohamedSeliem/patch-7
...
Doxygen Fix
2016-09-23 08:31:41 +02:00
Antonio Lignan
e658bdfcfe
Merge pull request #1860 from alignan/pull/remote-power-mgmt
...
Zoul: power management driver for the RE-Mote revision B
2016-09-23 08:30:56 +02:00
Antonio Lignan
95ed9a9a91
Merge pull request #1859 from alignan/pull/remote-rtcc-update
...
Zoul: RTCC with trigger selection and second-based time increase
2016-09-23 08:30:20 +02:00
Mohamed Seliem
150b97879d
Doxygen Fix
...
this minor fixation to avoid Doxygen bug, which appears when doing this in the documented code:
/**
* \exception \c text
*/
void foo();
2016-09-22 22:30:54 +02:00
Antonio Lignan
268330c7e5
Zoul: power management driver for the RE-Mote revision B
2016-09-22 21:45:54 +02:00
Garret Kelly
42c4cb94e0
rpl: fix debugging PRINTF in find_removable_dio
2016-09-22 10:54:55 -04:00
Antonio Lignan
6aa5890e73
Merge pull request #1869 from nfi/cooja-export-simulations-with-wismote-and-z1
...
Added support in Cooja to include Wismote and Z1 motes when exporting simulations
2016-09-22 12:26:11 +02:00
Niclas Finne
e648373677
Cooja now supports Wismote and Z1 motes when exporting simulations as
...
executable JAR.
2016-09-22 10:56:56 +02:00
Harald Pichler
a5b59e8cbb
Merge branch 'contiki'
...
Conflicts:
.gitmodules
core/net/mac/contikimac/contikimac.c
cpu/cc26xx-cc13xx/lib/cc13xxware
2016-09-21 21:09:29 +02:00
Mohamed Seliem
682abac7b7
update uart1.c to include Special function registers bits
...
including "sfr-bits.h" to define PERCFG_U1CFG, and UCSR_MODE
2016-09-21 14:32:09 +02:00
Harald Pichler
6f7e68c3d4
make it possible to config node as host in project.conf
2016-09-20 21:56:32 +02:00
Harald Pichler
2fd23f99ed
config as hostnode, add coap client
2016-09-20 21:49:52 +02:00
Harald Pichler
8b1745214c
bugfix answear speed
2016-09-20 21:22:11 +02:00
Harald Pichler
28f2b2caa8
add coap client function
2016-09-20 21:20:34 +02:00
Yannic Schröder
d524211c2a
Clean exit of serialdump when hitting Ctrl-C
...
Ctrl-C is the best way to close serialdump after using make login.
With a clean exit it will signal to make that the make run was successful.
2016-09-20 14:18:21 +02:00
