julienabeille
632a3585f5
Modification to tapdev for IPv6 support
2008-10-14 09:47:15 +00:00
adamdunkels
cdb6226598
Changes to support the Atmel AVR Raven port
2008-10-14 09:44:12 +00:00
adamdunkels
db7d9bb131
Radio and 802.15.4 MAC code for the Atmel AVR Raven board
2008-10-14 09:43:40 +00:00
nifi
49f57b7848
changed to use unsigned long for seconds counter
2008-10-10 12:36:58 +00:00
joxe
8748230ead
changed usart code to handle LPM3
2008-09-18 17:59:27 +00:00
fros4943
b90075ea0a
bug fix, msp430 hw bug (undocumented):
...
when in continuous/compare mode the interrupt handler may get called before CCR==TR.
behavior observed when the timer is toggled between STOP/CONT in an external interrupt handler (serial input).
possibly this problem may also affect watchdog timer/timer B
2008-09-16 12:00:48 +00:00
fros4943
3ec170cdf5
added empty mtarch_stop()
2008-08-27 13:10:29 +00:00
oliverschmidt
f822ac9797
Added clock_seconds() implementation.
2008-07-12 14:44:37 +00:00
adamdunkels
fc6d059d24
Added a clock_seconds() function prototype to core/sys/clock.h, that returns seconds in 32 bit format. On platforms like the MSP430, which has a 16 bit native datatype, this cannot be implemented with an interrupt tick that increments a 32 bit value because access is not atomic. Instead, the MSP430 code increments 16 bit seconds value and converts this into a 32 bit value through an offset calculation. If the new value is smaller than the last check, the offset is incremented by 65536. This change also means that CLOCK_CONF_SECOND must be a power of two because a modulo operation is used inside the periodic tick interrupt handler.
2008-07-07 23:38:09 +00:00
oliverschmidt
c9a8eea371
Added cfs_seek to the preprocessor level implementation of the cfs API.
2008-07-06 07:28:05 +00:00
nvt-se
6440c3de81
removed unnecessary inclusion
2008-07-04 03:03:41 +00:00
adamdunkels
62b7ef5173
Moved energest from lib/ to sys/
2008-07-04 00:02:21 +00:00
adamdunkels
64b6663b11
moved energest from lib/ to sys/
2008-07-03 23:59:20 +00:00
adamdunkels
871598fb24
Added dummy watchdog.c to allow compiling and running code that calls the watchdog functions
2008-07-03 23:10:25 +00:00
matsutsuka
d194d54e8e
CC_CONST_FUNCTION replaces some const keywords in order to workaround a sdcc bug, which cannot handle function pointers as const.
2008-07-02 15:02:33 +00:00
adamdunkels
7c459c849d
The .ihex file use the intermediate Contiki-wide .$(TARGET) target instead of the MSP430-specific .firmware
2008-07-02 14:11:34 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
matsutsuka
29b17c6933
Modified some glitches in startup code, and introduced additional typedefs required in the current version.
2008-07-02 07:13:22 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
2569a8fc69
Removed unused file
2008-07-01 20:59:44 +00:00
adamdunkels
9d7c81d4ed
Added missing IPBUF definition needed for IPv6
2008-06-23 19:53:16 +00:00
adamdunkels
d094fe254f
Fixed problems with IPv6-enabled Windows XP
2008-06-23 19:52:44 +00:00
oliverschmidt
f6c310d90a
I'd better don't try to be smart by including read access into every write access - as the cc65 CBM POSIX file I/O library doesn't allow for both reading and writing at all.
2008-06-16 11:20:22 +00:00
oliverschmidt
456d7ad45e
Updated URL.
2008-06-13 20:08:06 +00:00
oliverschmidt
d619b095a9
Added some info on the high-level config macros (and other stuff).
2008-06-12 22:15:50 +00:00
oliverschmidt
929da590be
Removed '!' as gnumake already adds '.'.
2008-05-22 19:43:08 +00:00
adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
joxe
57dedee38f
enabled ADC IRQs if ADC sensors active
2008-04-25 15:53:55 +00:00
oliverschmidt
b7958e3472
Fixed minor copy&paste issue.
2008-03-29 15:22:39 +00:00
oliverschmidt
3d1d6e333c
Added high level config macro for the new compiletime forwarding option.
2008-03-29 15:21:51 +00:00
oliverschmidt
e72ca9e5d4
Allow division by RTIMER_ARCH_SECOND to compile.
2008-03-28 22:38:03 +00:00
oliverschmidt
a500f2dd73
Removed unused variable.
2008-03-04 22:56:54 +00:00
oliverschmidt
a7e73d030a
Added naive snprintf support.
2008-02-16 08:56:29 +00:00
adamdunkels
da49b950d4
Count the number of times the watchdog has been stopped to avoid starting it when someone else has stopped it
2008-02-11 10:45:19 +00:00
adamdunkels
660b7f9a78
Initialize watchdog instead of stopping and starting it
2008-02-11 10:44:49 +00:00
oliverschmidt
a685acd23a
Turned rtimer_arch_now() from a (one line) function into a macro.
2008-02-09 14:02:12 +00:00
oliverschmidt
604a9c2bf0
Removed (now obsolete) PROCESS_LOADABLE.
2008-02-07 19:56:56 +00:00
adamdunkels
cf5ff2bbb2
Made SLIP code coexist with ordinary serial code. If WITH_UIP=1, the SLIP code is used instead.
2008-02-03 20:59:35 +00:00
adamdunkels
e68d669265
Added improvements suggested by Hardy Greich: define CPU speed in one place only (contiki-conf.h), added nop to XTAL settlement delay
2008-02-03 20:58:11 +00:00
adamdunkels
a4d5ca833c
Update the periodic watchdog only if it is not stopped
2008-01-21 10:39:23 +00:00
adamdunkels
f2599b38e7
Added a WERROR variable, which, if set, causes -Werror flags to be turned on
2008-01-17 12:07:32 +00:00
adamdunkels
a46aceb5f8
Added generation of symbols.c if CORE is set
2008-01-08 08:04:41 +00:00
adamdunkels
e16b7ffcf0
Changed the return value of the inpt handler function to int so that it can wake up the CPU from LPM
2008-01-08 08:04:09 +00:00
adamdunkels
7f05b8a5ef
Added a reboot function
2008-01-08 08:03:02 +00:00
adamdunkels
b50d2b02ee
Reformatting to comply with code style
2008-01-08 08:01:41 +00:00
adamdunkels
345d0a8a79
Added a WERROR definition that can be used to turn -Werror on
2008-01-08 08:01:01 +00:00
oliverschmidt
b96c9deebc
Added "usual" comments.
2008-01-04 21:53:32 +00:00
oliverschmidt
bb19396d21
Introduced yet another high-level config macro.
2008-01-01 19:47:03 +00:00
oliverschmidt
216d20dabb
Allow to implement cfs API on preprocessor level using a "pfs" (platform file system) by setting a new high-level config macro.
2008-01-01 17:44:24 +00:00
oliverschmidt
faad65bddd
Use cfs filesystem to allow for specific implementations.
2007-12-24 00:13:28 +00:00
