Mariano Alvira
3e5afa2b59
replace MAC_CONF_CHANNEL_CHECK_RATE with
...
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE for redbee-dev and econotag
Removed the obsolete MAC_CONF_CHANNEL_CHECK_RATE (now replaced with
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE)
2011-09-06 07:49:23 -04:00
Mariano Alvira
6c0bbc492b
change mc1322x rtimers to 32-bit
...
hardcode a close default value for the RTC
2011-09-02 12:32:47 -04:00
David Kopf
3c18372939
Add periodic prints and stack monitor
2011-08-24 10:55:58 -04:00
Mariano Alvira
697af5ef08
adding tmp102 sensor for the econotag from Hedde Bosman.
...
This can be pulling in as a common driver if we can make a generic i2c
Contiki driver.
2011-07-18 07:30:49 -04:00
Mariano Alvira
e80f9eb4b5
mc1322x: build fixes for uart2
2011-07-08 19:40:42 -04:00
Mariano Alvira
cb29a9c667
add leds and button capabilities to the econotag.
2011-05-27 11:01:54 -04:00
Mariano Alvira
e2d9082fc7
factor maca hw autoack and nullrdc hw autoack config
2011-05-08 09:50:57 -04:00
Mariano Alvira
65671c66c6
turn on insert ack packet by default
2011-05-08 09:50:57 -04:00
dak664
2e14df3981
Options to extend mc1322x fifo to RAM buffer, or use hardware flow control with tunslip6.
2011-04-08 15:15:16 -04:00
Mariano Alvira
0af24040f1
econotag: add an option to use the watchdog timer
2011-03-22 16:35:54 -04:00
Mariano Alvira
59768e7bc7
econotag: fix problem with how IAB based mac addresses are formed
2011-03-13 17:48:47 -04:00
Mariano Alvira
05a4961604
econotag: generate EUI64 mac adresses properly
2011-02-23 15:20:08 -08:00
Mariano Alvira
e9c904a74c
econotag: turn DEBUG off by default
2011-02-23 15:19:44 -08:00
Mariano Alvira
c2c70a22df
mc1322x: setup hardware addresses and enable AUTOACK mode if
...
configured
2011-02-23 15:19:44 -08:00
Mariano Alvira
e826ccd3b9
add NULLRDC_CONF_802154_AUTOACK_HW for radios that only pass-up NOACK
...
status but not the actual ack packet.
2011-02-23 15:19:44 -08:00
Mariano Alvira
ad200384ac
add a dummy light sensor for econotag
2011-02-08 09:07:45 -05:00
Mariano Alvira
227b72c88d
add dummy node-id.h for econotag
2011-02-08 09:07:34 -05:00
Mariano Alvira
9572baa71b
fix mc13224v led driver to only touch gpio used for leds.
2011-02-08 09:07:11 -05:00
Mariano Alvira
dbe6407a22
change mc13224v button-sensor to use gpio structs
2011-02-08 09:07:03 -05:00
nifi
3bd78893e5
Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc.
...
nullrdc (previously nullrdc-framer) is now a RDC implementation that
does not do any radio duty cycling but supports link layer addresses
and frame format via framer (for example 802.15.4). nullrdc can now be
used in the same way as contikimac, xmac, etc.
nullrdc-noframer (previously nullrdc) is a null RDC implementation
that does not do any radio duty cycling, does not add any header of its
own to the packets, and does not support link layer addresses.
2010-11-23 18:11:00 +00:00
maralvira
5b4c63440b
fix typos
2010-11-09 01:30:38 +00:00
maralvira
3747f9a7c5
use the nullmac and nullrdc with framer layer.
2010-11-07 18:36:52 +00:00
maralvira
e029fa8da0
fix defines for raw mode
2010-11-07 18:34:52 +00:00
maralvira
26725e7c19
use sicslowmac_driver instead of contikimac_driver --- since contikimac
...
power saving doesn't seem to be working.
2010-11-07 13:46:03 +00:00
maralvira
1cfa126568
enable sicslowpan fragmentation
2010-07-28 18:51:27 +00:00
maralvira
fe16506d1d
increase UIP buffer size to 1300 to allow full size ipv6 packets
2010-07-28 18:51:00 +00:00
maralvira
8dce85c308
don't need BLOCKING_TX anymore with the recent bugfixes
2010-07-28 18:50:07 +00:00
maralvira
994067aecd
bring econotag conf in-sync with sky.
...
Increase the size of the route and neighbor tables; remove the uIP
packet buffer queue for every neighbor to save RAM
2010-06-14 15:56:09 +00:00
maralvira
c01421fbb5
update process initialization and call ctimer_init
2010-06-09 18:05:38 +00:00
maralvira
7aa44f14d9
initial redbee-econotag commit
...
based on commit aac3a355451d899f02737f2907af8c874ee4feba of
git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-09 14:46:30 +00:00
