Commit graph

478 commits

Author SHA1 Message Date
Adam Dunkels 3cb42ceb10 Made the ContikiMAC header configurable from contiki-conf.h 2011-09-02 13:37:46 +02:00
Adam Dunkels d6508cf3c0 Made the number of phase neighbors configurable 2011-08-31 20:54:21 +02:00
Vincent Brillault b0907f0344 Cleaning old .h :
- Delete unimplemented function and unused structures
- Remove misleading configuration options
- Transfer some comments from 6lowmac to framer-802154
(doc/uip6-doc.txt should be cleaned as well)
2011-07-11 13:20:30 +02:00
Niclas Finne 28b0479c06 Added optional address filtering 2011-06-15 17:51:57 +02:00
Niclas Finne e8a96dc202 Bug fix: update packet attributes in queued packets in CSMA instead of doing a full packetbuf copy after transmissions. The lower layers often add their own headers to packetbuf. 2011-06-15 16:10:07 +02:00
dak664 580efaa412 Fix compiler warning for unused variable 2011-05-18 11:22:25 -04:00
Salvatore Pitrulli 4fb433ac1f 'if' statement replaced by a preprocessor directive. 2011-05-12 21:50:47 +02:00
Adam Dunkels 74f1754d88 Bugfix: energy consumption for retransmissions was miscounted 2011-04-13 14:10:39 +02:00
Adam Dunkels af4ce9ba9e Bugfix: idle power consumption was sometimes misestimated for transmissions, when a duty cycle rtimer fired in the middle of a transmission 2011-04-13 14:10:02 +02:00
Mariano Alvira e826ccd3b9 add NULLRDC_CONF_802154_AUTOACK_HW for radios that only pass-up NOACK
status but not the actual ack packet.
2011-02-23 15:19:44 -08:00
Mariano Alvira a8f9119ace pass up a RADIO_NOACK to the MAC layer. 2011-02-23 15:19:43 -08:00
Adam Dunkels 733aaa546f Made the number of MAC sequence numbers to remember configurable; fixed bug with power attribution to the idle state. 2011-02-21 14:11:32 +01:00
Adam Dunkels 24af4888bc Made the number of MAC sequence numbers to remember configurable 2011-02-21 14:11:17 +01:00
Lionel Debroux 5cb49e8b07 Several compiler warning fixes:
* msp430: fix "implicit declaration of function" warnings in clock.c, by including watchdog.h;
     * sky: fix a couple pointer target signedness warnings;
     * core: fix several signed/unsigned comparison warnings;
     * framer-802154: "const static" -> "static const" to fix compiler warnings;
     * core: comment or remove unused variables and function definitions.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Mariano Alvira <mar@devl.org>
2011-02-20 19:28:14 -05:00
Adam Dunkels 46348d9013 Added the low-power streaming mode where frequent channel checks are performed when streaming is on. Enabling this will (by setting WITH_STREAMING to 1), however, significantly slow down Cooja/MSPsim simulations. 2011-02-08 21:57:46 +01:00
adamdunkels 09c223f549 Updated Contiki X-MAC to use hardware acks, which allows for tighter timing and results in a lower duty cycle. Hardware acks also make X-MAC more robust against packet losses, as there is a direct way for the CSMA layer to detect loss of data packets. Before, Contiki X-MAC only detected loss of strobes. 2011-01-25 14:31:09 +00:00
adamdunkels d51e99a3dd Updated streaming mode to use only about 20% radio. Made guard time more conservative due to problem report by Ricklef Wohlers. 2011-01-25 14:29:46 +00:00
adamdunkels fa524fabd7 Bugfix: q->buf was not tested for NULL, as it should be. Fix by Simon Duquennoy. 2011-01-25 14:24:38 +00:00
adamdunkels 808c21fbfa Bugfix: default should be 3 MAC-level retransmissions if collissions or loss occurs 2011-01-18 16:03:57 +00:00
adamdunkels affba785b5 Enabled phase-lock only for channel check rates of 32 Hz or lower 2011-01-18 16:03:19 +00:00
adamdunkels 26e3b6fdc0 Bugfix by Simon Duquennoy: don't transmit packet until previous packet has been sent by the RDC layer. 2011-01-13 19:06:22 +00:00
adamdunkels a0960154ba Cleaned up parts of the code; added comments 2011-01-09 21:07:01 +00:00
dak664 322d835fee Fix avr-gcc compiler warnings 2010-12-18 22:12:53 +00:00
adamdunkels 4a89cc9db3 Rework of the new CSMA in-order code that fixes a number of smalllish bugs in the in-order code. 2010-12-16 22:44:02 +00:00
adamdunkels 79f2c25dae Rework of the phase-lock optimization mechanism. There were several bugs in the existing code, such as the phase-lock would lose synchronization when a packet was lost. 2010-12-16 22:43:07 +00:00
adamdunkels 952dfc9384 Rework of the CSMA layer: instead of using one timer per packet, the module now uses one central timer and a queue of outgoing packets. This helps to keep packets in order, which is extremely useful for TCP transfers, and reduces the amount of congestion since consecutive packets now are spaced in time if there is a collision. Based on the observations and ideas of Simon Duquennoy. 2010-12-14 07:57:14 +00:00
adamdunkels af21afa750 Make sure that the cycle timing is exact 2010-12-10 13:36:06 +00:00
adamdunkels c19a967973 Bugfix: with the recent bugfixes, it was no longer possible to turn duty cycling back on after it had been turned off 2010-12-07 23:12:54 +00:00
adamdunkels 4c9793f428 Let ContikiMAC remember the state that the radio should have when duty cycling is turned off. This fixes a bug in which the radio was turned on after sending, even when NETSTACK_RDC.off(0) was enabled. 2010-12-06 09:08:22 +00:00
dak664 e54d7d6f9c Fix compiler warnings 2010-12-02 15:55:17 +00:00
adamdunkels 6d556d5c13 Fixed bug with link-layer ACKs. Refactored the ACK reception code. 2010-11-25 08:44:34 +00:00
nifi 3bd78893e5 Renamed nullrdc to nullrdc-noframer and nullrdc-framer to nullrdc.
nullrdc (previously nullrdc-framer) is now a RDC implementation that
does not do any radio duty cycling but supports link layer addresses
and frame format via framer (for example 802.15.4). nullrdc can now be
used in the same way as contikimac, xmac, etc.

nullrdc-noframer (previously nullrdc) is a null RDC implementation
that does not do any radio duty cycling, does not add any header of its
own to the packets, and does not support link layer addresses.
2010-11-23 18:11:00 +00:00
nifi 05d78522d3 Added MAC-layer duplicate message suppression when using 802.15.4 auto ack 2010-11-12 12:53:16 +00:00
adamdunkels b7df18a96a Turned off streaming by default to save code space; made guard time a little more conservative 2010-11-02 11:00:08 +00:00
adamdunkels 8fa7bf6c31 Always restore the queuebuf to the packetbuf before calling the upper layers. Reduce the waiting time between successive MAC layer retransmissions. 2010-10-24 21:07:00 +00:00
adamdunkels 73f5535754 Made the guard time slightly more conservative - found an occasion where this was needed 2010-10-24 21:06:17 +00:00
adamdunkels 9cb830ed37 Timing bugfix in the waiting period between channel samples to check if the coast is clear before sending a packet. 2010-10-20 22:25:24 +00:00
adamdunkels 3ffcff0656 Added mechanisms for explicit de-synchronization of synchronized neighbors. Added link-layer ACKs. Fixed bugs with MAC-layer interaction. Now seems to work somewhat (didn't work at all before, in some cases), but there are still problems with packet loss. 2010-10-20 15:23:43 +00:00
nifi e2b4956a7f Bug fix: release the packet and notify the sender if RDC returned an error 2010-10-14 19:08:39 +00:00
joxe 4f3fc1c404 fixed xmac to use new channel check define name 2010-10-03 22:46:53 +00:00
adamdunkels ceebd7020a Bugfix: the return value sometimes was wrong when a collision was detected. 2010-10-03 20:39:24 +00:00
adamdunkels ae88ed04f1 Moved the definition of the channel check rate used by the radio duty
cycling layer. This definition was previously held in net/mac/mac.h,
with the name MAC_CONF_CHANNEL_CHECK_RATE. But since the rate is used
by the radio duty cycling layer, it makes more sense to change its
name to reflect this. Also, the configuration option should be tied to
the netstack configuration instead.

So the new configuration option is called
NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE.
2010-10-03 20:37:32 +00:00
adamdunkels eb58968459 Added a timer to each phase structure that keeps track of for how long
a particular receiver has not ACKed packets. After some time
(currently 16 seconds), the sender will begin sending full strobe
periods again.
2010-09-13 13:39:05 +00:00
dak664 12479c32bc Fix compiler warnings 2010-08-01 21:18:07 +00:00
nifi 21828ad782 Changed the retransmission time to be based on the configured MAC channel check rate when the RDC has no channel check interval. 2010-06-16 10:08:30 +00:00
adamdunkels 7647cbd8aa Use the list_item_next() API 2010-06-15 19:22:25 +00:00
adamdunkels 3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
adamdunkels 951fd78f6c ctimer moved from net/rime to sys/ 2010-06-14 18:58:45 +00:00
adamdunkels 8f8393aadc Moved ctimer.[ch] from their old and illogical location in core/net/rime to a more appropriate place in core/sys 2010-06-14 07:34:36 +00:00
adamdunkels 8d1680fed5 Filter duplicate packets 2010-06-14 06:52:41 +00:00
nifi ac9b862cd0 Added configurable support for 802.15.4 autoack 2010-05-26 14:12:33 +00:00
nvt-se b8a3a4109e Adjusted the code so as to remove compilation warnings. 2010-04-30 22:18:12 +00:00
adamdunkels 0859d4b95f Avoid turning off the radio in the middle of a packet reception 2010-04-30 07:32:39 +00:00
adamdunkels e606c674c2 Rewrote LPP so that it uses 802.15.4 headers. A number of bugfixes with respect to alignment. Avoid turning off the radio in the middle of packet reception. 2010-04-30 07:31:44 +00:00
adamdunkels 3c735fcea4 Added a packetbuf flag that indicates if the link layer acks should be used or not 2010-04-30 07:25:51 +00:00
fros4943 12b6f35ce7 PRINTF()ed debugging output 2010-04-27 12:56:35 +00:00
nifi 85d6f6c514 removed unused variable 2010-04-26 22:41:50 +00:00
nifi b26f45a35b code cleanup 2010-04-26 17:55:11 +00:00
nifi d761b6e89a Added MAC header to handle padding 2010-04-26 17:46:21 +00:00
nifi 14b1bb9f57 Fixed to only use leds when DEBUG is set 2010-04-20 11:41:16 +00:00
adamdunkels 3670fac618 Bugfix: timing fixed 2010-04-08 18:23:24 +00:00
adamdunkels 91ff8574ad Improved handling of duplicate packets 2010-04-08 09:32:56 +00:00
nvt-se ac4ba199bc Turn off DEBUG mode by default. 2010-04-06 21:37:54 +00:00
adamdunkels 497111bcc9 Added an optional rate limit for broadcast transmissions 2010-04-06 11:57:43 +00:00
adamdunkels e06a30fdb0 Added MAC-layer duplicate message suppression, which is very helpful when running with duty cycling turned off 2010-04-05 19:28:07 +00:00
adamdunkels c68ee6e577 Bugfix: memory from the wrong memb was freed. 2010-04-04 21:02:09 +00:00
adamdunkels a4c328785a Small timing tweaks 2010-04-04 21:01:24 +00:00
adamdunkels 62039a530d Removed non-existant cooja-debug.h include 2010-04-04 12:31:47 +00:00
adamdunkels 7d6ff0289e Fiddled more with the timing: the phase seems stable now at least. Still bugs left though... 2010-04-04 12:28:29 +00:00
adamdunkels be117afe04 After a lot of tweaking and twiddling with the timing of the ContikiMAC code and the mechanisms in the CC2420 driver, things seem to work somewhat stable now - knock on wood! 2010-04-04 07:49:30 +00:00
adamdunkels 121ca946e1 Improved phase lock behaviour when neighbor is not duty cycling: senders notify receivers via the 802.15.4 pending bit that they are not duty cycling. Neighbors then will start sending packets immediately and not wait for neighbors' phase. Tweaking of ContikiMAC timers to make it more reliable. 2010-04-03 13:28:30 +00:00
joxe 6ae86d001d made number of phase neighbors configurable 2010-04-01 17:17:36 +00:00
adamdunkels add426de4b Bugfixed stream mode: node listens 100% for 0.5 seconds in stream mode. Naming change: is_listening changed is_snooping. 2010-04-01 10:02:04 +00:00
adamdunkels b43f7830b3 Fine-tuned the timing and phase lock optimization 2010-03-31 20:27:15 +00:00
adamdunkels 877eb2fbe9 Fiddled with the timing 2010-03-31 11:54:38 +00:00
adamdunkels bcfa80102d Had previously not included the waiting time that the CC2420 introduces when sending a packet. Also increased the smallest packet size, just to be on the safe side. 2010-03-30 23:01:32 +00:00
adamdunkels 226abb8ec3 Removed non-existant include file 2010-03-29 22:10:03 +00:00
adamdunkels 9c58768b59 Extend packet size after creating 802.15.4 header; prepare radio chip with packet before waiting for neighbor phase to make phase wait time deterministic 2010-03-29 21:51:36 +00:00
adamdunkels b4b7e942b6 Back off a guard time for every non-ack packet 2010-03-29 21:50:01 +00:00
nifi 9508d2c4d7 * Added configurable default number of transmissions for CSMA to use when not specified using packetbuf attributes (CSMA_CONF_MAX_MAC_TRANSMISSIONS).
* Renamed packetbuf attribute PACKETBUF_ATTR_MAX_MAC_REXMIT to PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS where value 0 (attribute not set) means that default number of transmissions should be used.
2010-03-26 12:29:29 +00:00
adamdunkels 49009e9cbd Extend the length of announcement packets if they are too short 2010-03-19 13:24:58 +00:00
adamdunkels 115b3a7c5c Minor timing bugfix: the time between channel checks should not include the time required for the channel check itself 2010-03-17 18:24:06 +00:00
adamdunkels efeb9944fa Increase the required non-activity periods before turning off the radio; remove the strict phase requirement (which messes up things with low-power streaming) 2010-03-17 16:35:52 +00:00
adamdunkels 9be1a65211 Don't set the RELIABLE flag on incoming packets with the ack requested flag set, since it is set on most packets even if they aren't reliable 2010-03-16 18:11:58 +00:00
adamdunkels b1feac5a00 Bugfixes in low-power streaming mode, and re-added support for announcements. These now use the low-power streaming mode so that active listening for announcments have a radio duty cycle of 16% rather than 100% 2010-03-16 18:11:13 +00:00
adamdunkels 7bab9316da Two major changes:
* Low-power streaming. Experimental support for a low-power mode which
  allows rapid exchange of packets with a 16% duty cycle. Does not
  seem to function correctly yet though.

* Phase locking. When the phase of a neighbor has been detected, the
  sender assumes that the neighbor will keeps it phase and does not
  send more strobes than necessary to hit the receiver's channel
  check - even if the receiver does not acknowledge the reception of
  the strobes when it should have been awake. Instead, the sender
  stops strobing and tries again at a later time.
2010-03-14 22:59:23 +00:00
oliverschmidt def540e6c0 Avoid newlines in macro expansions as cc65 doesn't support them between the macro name and the open parenthesis of the arguments.
There were btw other even longer lines with expansions of the same macro already present.
2010-03-14 12:13:54 +00:00
nifi 2cf0fb9cce Changed to use short address mode with short rime addresses 2010-03-12 14:49:21 +00:00
adamdunkels 4b60301727 Don't set the ack flag for broadcast packets 2010-03-09 20:40:11 +00:00
adamdunkels 17f6b3a324 Simplified the structure of the code 2010-03-09 20:38:55 +00:00
adamdunkels d0e6436a20 Don't call up the netstack if the transmission was deferred 2010-03-09 20:37:02 +00:00
adamdunkels edda6dd86c Minor bugfix: don't subtract collisions and deferrals from the number of transmissions 2010-03-09 13:23:58 +00:00
adamdunkels 2c3d3e3d73 Bugfix: handle deferred transmissions correctly (don't count them) 2010-03-09 13:20:08 +00:00
adamdunkels 79722b4247 Rework of the timing conditions of ContikiMAC: the old timing did not work well on real hardware, the new one seems to work better 2010-03-09 13:19:05 +00:00
nvt-se 96eb20d235 forward arguments even if REXMIT is not set 2010-03-04 14:17:43 +00:00
nifi 5e43a6998b Replaced old framer (framer_get/framer_set) with new NETSTACK style configuration. Added nullrdc-framer that is a nullrdc with framer support. 2010-03-01 13:30:21 +00:00
nifi 0c084b8c68 added random init of sequence number 2010-03-01 13:17:01 +00:00
adamdunkels 410d860a93 Improved handling of neighbor phase estimation: instead of busy-waiting while waiting for neighbor's phase, the new code schedules a timer just before neighbor wakes up 2010-02-28 20:19:47 +00:00
adamdunkels e6fceb7200 Added MAC-layer return value to indicate that a packet transmission was deferred 2010-02-28 20:18:30 +00:00
adamdunkels e06acc4525 Prod the watchdog if waiting for along time 2010-02-28 14:15:16 +00:00
adamdunkels 74da90a06b Don't count collisions as transmissions 2010-02-28 10:07:17 +00:00
adamdunkels b6b4941871 Made the number of MAC-layer retransmissions configurable on a per-packet basis, via a packet attribute 2010-02-28 08:35:16 +00:00
adamdunkels ed88f487c8 Improved detection of link-layer ACKs; increased the time ContikiMAC waits when it has detected a link-layer ACK; increased the number of silence periods required to detect a CCA false positive 2010-02-28 08:33:21 +00:00
nifi b50d47fb80 added missing function in sicslowmac_driver 2010-02-23 22:45:11 +00:00
nifi 1cfcc8a73a Removed the combined name of CSMA and NETSTACK_RDC. The name of NETSTACK_RDC can be accessed separately if needed. 2010-02-23 20:42:45 +00:00
nifi c20047f657 Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration. 2010-02-23 20:09:11 +00:00
adamdunkels bb62749de7 Made debug printfs optional 2010-02-23 18:49:58 +00:00
adamdunkels 0ab2ba433f Bugfix: the wrong callback pointer was passed to higher layers. 2010-02-23 18:49:45 +00:00
adamdunkels ed52586e18 Rework of parts of the ContikiMAC code based on input from experimental results. When channel check is triggered because of a false positive, the new version checks the radio several times to make sure that there really is an incoming packet. Otherwise, the radio is switched off. Cleaned up and removed old unused code. Added a few temporary debugging mechanisms and functions. 2010-02-23 18:49:05 +00:00
adamdunkels 0b2b7bcdba Removed inadvertedly left-over include file 2010-02-18 23:52:34 +00:00
adamdunkels e34eb54960 A work-in-progress rework of the Contiki MAC and radio layers. The
main ideas are:

* Separates the Contiki low-layer network stack into four layers:
  network (e.g. sicslowpan / rime), Medium Access Control MAC
  (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
  radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
  that specify what mechanism/protocol/driver to use at the four
  layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
  NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
  the fate of a transmitted packet: if the packet was not possible to
  transmit, the cause of the failure is reported, and if the packets
  was successfully transmitted, the number of tries before it was
  finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
  which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
  efficient radio duty cycling protocols: channel check, pending
  packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
  #defines.
2010-02-18 21:48:39 +00:00
adamdunkels f8c804e28b ntikiMAC: a new radio duty cycling mechanism that uses a combination
of link-layer and MAC-layer mechanisms to achieve a very low power
consumption: during idle listening the radio is switched off between
99.2% and 99.6% of the time. One unicast transmission typically adds
between 0.07% and 1.2% additional radio time, depending on packet
size.

ContikiMAC uses the standard IEEE 802.15.4 message format and adds no
additional headers.

ContikiMAC is simple: it uses periodic two-shot channel sampling
during idle listening to keep the radio on-time down. Transmissions
are done with repeated transmissions until a link-layer ACK is
received.
2010-02-18 21:26:15 +00:00
adamdunkels f5c48751b5 Reworked 802.15.4 header creation and parsing so that it works regardless of the size of the rimeaddr_t typedef 2010-02-18 21:00:28 +00:00
adamdunkels 2fbf21b2b3 Refactored the phase optimization functionality into a separate module 2010-02-18 20:58:59 +00:00
adamdunkels 75e1c0c8c7 Include contiki-conf.h to let the MAC channel check rate be configurable 2010-02-03 16:45:12 +00:00
adamdunkels 06d17c7e1c Remove unused rtimer code 2010-02-03 16:44:43 +00:00
adamdunkels e419eb3cc5 Retransmit packet if it didn't receive a MAC layer ack 2010-02-03 01:17:54 +00:00
adamdunkels d68af249ec Added a MAC layer return value that informs the caller that a packet did not receive a MAC layer acknowledgement 2010-02-03 01:17:32 +00:00
adamdunkels 181213124b Added a configuration option for setting the MAC channel check rate (which must be a power of two). The configuration is independent of the MAC protocol. 2010-02-02 23:28:58 +00:00
adamdunkels fcf60e9260 Removed the csma_init declaration in the mac_driver struct since it isn't needed and it breaks sdcc 2010-02-02 20:45:58 +00:00
adamdunkels cc2be0f111 Remove compiler warnings 2010-02-02 16:33:07 +00:00
adamdunkels 1a13d25d33 Revised version of the X-MAC implementation that uses a ctimer instead
of an rtimer for the periodic radio duty cycling. The benefit of this
implementation is that it leaves an rtimer free for user tasks. The
drawback is a slightly higher idle power consumption. This new version
is based on the current rtimer-based X-MAC.
2010-01-31 18:44:23 +00:00
adamdunkels e4168db633 Bugfix: deallocate queuebuf only if there was no collision 2010-01-31 13:55:36 +00:00
adamdunkels 2ae7ed827c Increase the default X-MAC channel check rate to 4 Hz instead of 2 Hz 2010-01-28 13:40:47 +00:00
adamdunkels 8430dab039 Typecast to fix nightly build problem 2010-01-27 07:36:31 +00:00
adamdunkels 4f3e8d565c Added a simple CSMA (Carrier Sense Multiple Access) mechanism that
works on top of an underlying duty cycling mechanism. The CSMA layer
retransmits packets that could not be sent because of a collision was
detected.
2010-01-25 11:46:44 +00:00
adamdunkels 7ad93e5d18 Added a field to the struct mac interface:
channel_check_interval(). This function returns the interval by which
the duty cycling mechanism checks the radio channel for activity. It
is used by higher layer mechanisms to determine suitable timeouts for
retransmissions.
2010-01-25 11:43:32 +00:00
adamdunkels 743e93e650 Do not remove encounters - there is no need to, as they are only an optimization 2010-01-14 20:14:03 +00:00
adamdunkels 2f105e933a Variable xmac_is_on was used both in interrupt and non-interrupt contexts and needs to be volatile 2009-12-06 23:29:38 +00:00
adamdunkels 53457eb1f0 Fixed compilation warning 2009-12-06 17:10:54 +00:00
adamdunkels 8bcc838d8a Bugfix: don't set the 'we are sending' flag until we are actually sending 2009-12-06 17:05:45 +00:00
adamdunkels 6897270289 Bugfix to the Contiki LPP encounter timing code: encounters are now
properly timed.
2009-12-06 13:18:32 +00:00
adamdunkels 822149f943 Significant improvements to the Contiki X-MAC:
* the code is simplified, particularly the duty cycling logic
* old unused code has been removed
* Contiki X-MAC now listens before sending a strobe to avoid MAC-level
  collisions
* broadcasts are sent directly, without strobes, reducing the power
  consumption of receivers
* turn off radio for 1 ms between sending a strobe and expecting the
  strobe ack
2009-12-06 13:16:59 +00:00
adamdunkels cef2e65c9b Added an error type for signalling a MAC-layer collision 2009-12-05 21:49:51 +00:00
adamdunkels 4a1a823a49 Code style fix 2009-12-05 13:29:41 +00:00
fros4943 a1b4597b95 fixed announcement compilation error 2009-11-27 14:27:50 +00:00
adamdunkels aeefa75304 Fixed alignment problems in announcement packet creation 2009-11-27 12:49:27 +00:00
fros4943 0034fd7bca generic return values for sent packet 2009-11-13 10:09:02 +00:00
fros4943 26bb5ecd21 added radio and MAC generic return values to allow applications finding out whether the packet was transmitted 2009-11-13 08:59:22 +00:00
adamdunkels 70fc23ac7e Enable stream mode by default, remove LED debug mode 2009-11-04 16:02:45 +00:00
adamdunkels 5aab2eb77d A simple addition with significant performance implications:
sicslowpan tags TCP packets with the PACKETBUF_ATTR_PACKET_TYPE_STREAM
flag, which makes the underlying power-saving MAC layer keep the radio
on for some time after transmitting the packet. This allows reply
packets to be processed directly, significantly increasing TCP latency
and throughput.
2009-11-02 11:58:56 +00:00
nifi 223fa1c8e5 added missing include 2009-10-20 07:42:03 +00:00
adamdunkels 7cdfbca973 Alignment problems with announcements fixed 2009-10-19 21:27:02 +00:00
adamdunkels 9ec57d61ad Added MAC layer framing support to X-MAC so that packets now are standard 802.15.4 frames 2009-10-19 20:53:56 +00:00
adamdunkels 4de1816e36 Added a new module called "framer" that creates MAC level frames to
the packetbuf from packet attributes. Two framer modules are included,
one that creates 802.15.4 frame headers, and one that creates a
minimal "nullmac"-style header that only contains the link-local
addresses.
2009-10-19 18:30:03 +00:00
nifi ae226c5917 * Set sender and receiver packet attributes on incoming packets
* Added link layer destination check
2009-10-19 11:25:54 +00:00
adamdunkels 10c873018d Ensure that DEFAULT_PERIOD is != 0, to avoid a modulo with 0 2009-10-19 06:39:29 +00:00
adamdunkels 9d26bd663e A new optimization to X-MAC: senders now keep track of when neighbors
last were known to be awake. When sending a packet, a sender does not
start to send strobes until the neighbor is expected to be awake. This
reduces power consumption for senders and decreases the contention in
the network as there are less packets in the air. Additionally, the
ACK optimization was improved so that data/ack exchanges now are
more efficient.
2009-10-18 13:19:25 +00:00
nifi 0ad51b8dcc Moved the link layer destination check to sicslowmac 2009-09-18 16:37:17 +00:00
adamdunkels 2181e90f69 Added the possibility to switch lpp off. Fixed sdcc compiler issue 2009-09-09 21:09:23 +00:00
adamdunkels 1cafbc6002 sdcc compiler issue fix: compound assignments are not supported, so we use memcpy() instead 2009-09-09 21:08:46 +00:00
nvt-se 4d21a3e203 Don't assume that radio->send turns on the radio automatically. 2009-09-04 10:59:30 +00:00
adamdunkels 522f991f14 Set sender and receiver packet attributes on incoming packets: patch by Gidon Ernst 2009-08-20 18:59:17 +00:00
nifi 912aba7280 added init function in MAC driver for easier configuration 2009-06-22 11:14:11 +00:00
nifi f39d2bd4c6 Fixed link panid for broadcasts to be standard compliant. Ignore packets addressed to other non-broadcast panids. 2009-05-26 12:08:29 +00:00
adamdunkels fe5a1f1068 Added an optimization option that avoids multiple simultaneous broadcasts from neighbors: when a broadcast is to be sent, a sender does not send until it knows that no other nodes are broadcasting. 2009-05-10 21:09:05 +00:00
adamdunkels 0adceb63b4 Code cleanup; made encounter optimization explicit; added optimization for adaptive off-time, but it currently seems to work bad with broadcasts 2009-05-06 15:06:38 +00:00
adamdunkels 9fff85757d Code cleanup; made strobe transmission time longer again (seems to work better in cooja?) 2009-05-06 15:05:28 +00:00
adamdunkels cc44e89415 Reduced default strobe time, which seems to work well. Avoid running the interrupt if the power-save feature is turned off (fixes problems with serial data reception on a gateway mote) 2009-04-29 11:42:13 +00:00
adamdunkels 81ef83b856 Added option to wait randomly before sending a packet. A few code cleanups. Avoid switching radio off when sending a packet with end-to-end acks, because an ACK may arrive shortly after the transmission. 2009-04-28 14:00:53 +00:00
nifi 84b38de494 removed bitfields for compatibility with cc65 2009-04-09 21:54:09 +00:00
nvt-se 03cd533712 made LISTEN_TIME and OFF_TIME configurable. 2009-04-07 11:29:08 +00:00
adamdunkels 5e456aea7d Added optimization for sending ACKs immediately. Turned optimizations on. Increased listening time to 1/64 s again due to problems with broadcasts with the 1/128 s setting 2009-04-06 22:50:35 +00:00
nifi 9f2ff48fda added 802.15.4 frame packeter 2009-04-06 13:19:03 +00:00
adamdunkels ed1e945e66 Added guard code so that OFF_TIME is never zero 2009-04-03 20:08:05 +00:00
adamdunkels 8dbd2b2337 Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer. 2009-04-03 19:59:22 +00:00
adamdunkels 1d86b01bfb Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time. 2009-04-03 11:45:06 +00:00
adamdunkels 04101aae36 Fixed alignment problem on the MSP430, where the LPP header may be misaligned 2009-03-31 17:39:54 +00:00
nvt-se e2cc8b2a3e send all queued packet once we have the chance. 2009-03-31 14:44:13 +00:00
nvt-se 1d47e2a8da send immediate probes only if the packet is directed to us.
sleep for OFF_TIME if the queue is empty.

restrict double packet lifetime timeouts to unicast packets.

stop ctimer in remove_queued_packet in case the function is not called
via the ctimer callback. it could overwrite a valid packet otherwise.
2009-03-31 14:11:25 +00:00
nvt-se dd082f7fcf improvements to lpp based on code from Adam and discussions with Thiemo.
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
2009-03-31 12:47:00 +00:00
nvt-se d8caaca289 listen time and off time parameters configurable from outside because cc1020 needs longer listen time. 2009-03-26 12:50:57 +00:00
adamdunkels ec1677ca6c Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac 2009-03-23 21:06:26 +00:00
adamdunkels 1cbc0f4ea9 Send announcement packets only if there are any announcements to send 2009-03-23 21:00:25 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
adamdunkels dc7491f810 Bugfix and optimization: X-MAC did not properly switch the radio off after sending a packet, resulting in increased power consumption. For packets that require an ACK, we can let the radio be on in anticipation of the ACK (controlled with an WITH_ACK_OPTIMIZATION option) 2009-03-05 19:37:52 +00:00
adamdunkels d813d343c5 Cleaned up old left-over code 2009-03-01 20:38:57 +00:00
adamdunkels 7010eb84b8 Added support for communication power accounting. Energy is attributed to idle listening when the radio is switched off. Enegrgy is attributed to an incoming packet when it is received. Energy is attributed to an outgoing packet when it is transmitted. 2009-03-01 20:37:16 +00:00
adamdunkels e6907a1d8b Include random.h 2009-02-20 21:22:39 +00:00
adamdunkels aaa8c9d2c9 Construct the X-MAC header on the stack instead of directly in the packet header, because the packet header may be misaligned. A bit of cleanup in the code too. 2009-02-15 22:05:06 +00:00
adamdunkels e4b1ff461e Added MAC-layer announcement beacons to X-MAC. Configuratble through XMAC_CONF_ANNOUNCEMENTS 2009-02-14 20:35:03 +00:00
adamdunkels 585620c102 Reverted the recent change from random_rand() to rand(). It turned out that
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels dd9ffd87c4 Added missing #include announcement.h 2009-02-08 20:14:18 +00:00
adamdunkels 085df6b630 Improved version of LPP with support for broadcasts as well as announcement data in the probes 2009-02-08 19:30:18 +00:00
adamdunkels 91d280c4c9 Reverted to the old behaviour on broadcasts: send strobes for both unicast and broadcast packets. 2009-02-07 18:45:50 +00:00
fros4943 e42d572f81 updated for latest mac driver structure 2008-11-12 12:42:41 +00:00
adamdunkels 7b238a91af Don't turn on the radio on after sending a broadcast 2008-09-04 17:44:01 +00:00
adamdunkels c0c26262c4 No need to send strobes for broadcast packets: just send the actual packet instead 2008-07-07 23:25:12 +00:00
adamdunkels 05454ce929 Documentation bugfix 2008-07-02 14:10:28 +00:00
adamdunkels 1093a8fe28 Added name to mac structure. Do not turn radio on when sending a broadcast packet. Changed default off time to half a second. 2008-06-30 08:10:02 +00:00
adamdunkels 247de015b5 added name to mac structure 2008-06-30 08:09:17 +00:00
adamdunkels c9528fb010 Added name, made default listen time shorter 2008-06-30 08:08:59 +00:00
adamdunkels a7dfa95551 Added a 'name' field in the mac structure, which allows boot-up code to print out the name of the currently selected MAC protocol 2008-06-30 08:08:27 +00:00
oliverschmidt a5fcfa2787 I seem to remember that we wanted to avoid ignoring gcc warnings that might trigger errors with other compilers ;-) 2008-05-16 21:31:57 +00:00
adamdunkels 532692e5a0 Removed reference to non-existant function rimebuf_attr_isset() 2008-05-16 15:04:10 +00:00
adamdunkels 8ea461b039 Changed on time to work with the current default tick time on the sky platform 2008-05-15 08:59:48 +00:00
adamdunkels dbab9fbdb5 A quick, initial implementation of the LPP power-saving MAC protocol (Musaloiu-E et al, IPSN 2008) 2008-05-15 08:56:29 +00:00
adamdunkels 412facb831 This is an initial commit of an implementation of the Chameleon
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.

The details are in our SenSys 2007 paper:

Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.

http://www.sics.se/~adam/dunkels07adaptive.pdf

This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
adamdunkels 974870359a Changed all occurences of u8_t and u16_t to uint8_t and uint16_t 2008-02-24 22:10:30 +00:00
adamdunkels be1dd57cb3 Stopping watchdog before sending packets to allow for wait times longer than 1 second. Reduced default on time to 5 ms. Added option for turning off X-MAC but keeping the radio turned on. 2008-02-24 21:07:28 +00:00
adamdunkels 32a3fa5d4a Added parameter to the mac off() method that specifies whether or not the radio should be turned off when the MAC layer is turned off 2008-02-24 21:05:28 +00:00
adamdunkels bf8b5c093d Made timetable code optional 2008-01-24 06:17:51 +00:00
adamdunkels 8a9b931a4b Rewrote most of the X-MAC code to make it easier to follow, debug and modify. Also added an optional, experimental time synchronized addition that makes X-MACs on different nodes explicitly de-synchronized 2008-01-23 15:00:54 +00:00
adamdunkels bd125aaac6 Changed the code so that the rtimer is only set from the rtimer (interrupt) code, and not from the non-rtimer code. Removed unused code that was supposed to turn the radio off when a packet for another node was heard (but which didn't really work anyway). Changed default on time to 1/100 seconds, and off time to 1/2 seconds 2008-01-14 09:26:42 +00:00
oliverschmidt a9ebc469b8 Avoid usage of POSIX function names even for static functions as some indirectly included system header might declare them. 2007-12-23 14:56:54 +00:00
adamdunkels 5c5775e93b Ensure that receiver_callback is set before calling it 2007-12-16 14:31:43 +00:00
adamdunkels 18fd561041 Avoid switching the radio on and off when the MAC layer is turned off. Cleanups. 2007-12-05 13:23:17 +00:00
adamdunkels 52a8e8d16b Fixed to match the Contiki code style 2007-11-26 15:31:32 +00:00
adamdunkels 5e7cbff22a Fixed compiler warnings 2007-11-17 10:12:19 +00:00
adamdunkels 1cb3bad088 Multiple bugfixes and updates to xmac code by Niclas 2007-11-12 22:29:37 +00:00
adamdunkels 67aa9e8589 Made initialization function return a pointer to the MAC driver structure, to make initialization nicer 2007-10-23 21:27:57 +00:00
adamdunkels f638c628d7 Made initialization function return a pointer to the MAC driver structure, to make initialization nicer 2007-10-23 20:57:37 +00:00
fros4943 aa99049af0 simple tdma rtimer implemetation 2007-09-18 10:37:17 +00:00
fros4943 19b3035e36 simple tdma ctimer implementation 2007-09-18 10:36:36 +00:00
fros4943 25d2514541 xmac ctimer implementation 2007-09-18 10:35:39 +00:00
fros4943 858e2682e6 platform independent simple slotted tdma mac protocol
observe: uses event timers, not real-time timers!
2007-08-31 13:42:22 +00:00
matsutsuka 9d4fc0a1a8 Support for z80(sdcc) port.
In order to support, some core modules are modified as follows:

core/sys/dsc.h
- If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled.
- DSC_HEADER is changed to remove extra semicolon.

core/sys/process.h
- process_data_t is expressed by void* in signatures (known bug on sdcc).

core/sys/autostart.h
- autostart_processes is changed to remove extra semicolon.

core/sys/cc.h
- CC_CONF_ASSIGN_AGGREGATE is introduced.
- CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind
  of sdcc bug for an increment.

core/net/hc.c
core/net/uip_arp.c
core/net/uaodv.c
- Aggregation assignments are changed to uip_ipaddr_copy.

core/net/psock.c
core/net/uipbuf.c
core/net/dhcpc.c
apps/shell/shell.c
core/ctk/vnc-server.c
core/ctk/vnc-out.c
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

core/net/uip-over-mesh.c
- An extra semicolon is removed.

apps/dhcp/dhcp-dsc.c
apps/shell/shell-dsc.
apps/ftp/ftp-dsc.c
apps/process-list/process-list-dsc.c
apps/email/email-dsc.c
apps/webserver/webserver-dsc.c
apps/vnc/vnc-dsc.c
apps/vnc/vnc-viewer.h
apps/webbrowser/www-dsc.c
apps/about/about-dsc.c
apps/irc/irc-dsc.c
apps/telnet/telnet-dsc.c
apps/telnetd/telnetd-dsc.c
apps/netconf/netconf-dsc.c
apps/directory/directory-dsc.c
pps/calc/calc-dsc.c
- Modify an extern type to a real declaration, which is static
  to prevent a compile error.

core/net/mac/xmac.c
- Variables cannot be defined in a head of block on sdcc.

core/ctk/ctk.h
core/ctk/ctk.c
apps/program-handler/program-handler.c
- If CTK_CONF_ICONS is diabled, the whole icon-related code is disabled.

Makefile.include
- Add a set of configuration for an assembler.
- $(CLEAN) variable is introduced for customized cleanup.

apps/process-list/process-list.c
- PROCESSLIST_CONF_HEIGHT is introduced to address smaller screen size.

core/lib/ctk-filedialog.c
- FILES_CONF_HEIGHT is introduced to address smaller screen size.
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

apps/vnc/vnc-viewer.c
- A cast is added to prevent a compile error.
- "register" keyword in a signature cannot be used in sdcc,
  CC_REGISTER_ARG is used instead.

apps/webbrowser/webclient.c
- CC_CONF_INC_CAST_POINTER is introduced, a workaround of a kind
  of sdcc bug for an increment.

core/loader/elfloader.c
- A cast is added to prevent a compile error.

core/net/rime/rimeaddr.c
- An initialization is added to prevent a compile error.

core/net/rime/rudolph0.c
- NULL is changed to 0, because NULL causes a compile error.

core/net/rime/route-discovery.c
- Add an argument to match the definition of nf_callbacks.

cpu/z80/strcasecmp.h
cpu/z80/strcasecmp.c
cpu/z80/contiki-sdcc-conf.h
cpu/z80/mtarch.c
cpu/z80/mtarch.h
cpu/z80/Makefile.z80
- New files to make compilation availble on sdcc.
- Added support for multithreading.
2007-08-30 14:39:16 +00:00
adamdunkels 52eb372890 Modified to use the new MAC layer API 2007-05-25 08:06:44 +00:00
adamdunkels b07cfde31b Generic API for MAC layers 2007-05-25 06:40:19 +00:00
oliverschmidt 7904a7e294 Made it compile again. 2007-05-22 22:10:30 +00:00
adamdunkels edd509acf5 Added nicer configuration options. Added hack for optimizing X-MAC for unicast packets. Added statistics gathering. Turn radio off when someone else is receiving a packet. Queueing packets when X-MAC cannot send immediately (since someone else is transmitting). 2007-05-22 20:55:24 +00:00
oliverschmidt c15984eb24 Avoid function pointer mismatch in set_receive_function(). 2007-05-19 13:19:22 +00:00
oliverschmidt 0e9c61ca0c The PT_* macros contain return statements so a function using them must return a value. 2007-05-19 13:12:00 +00:00
adamdunkels 18825e05b6 Strobes for unicast packets are now acked immediately. Sleep cycle is now configurable. Many bugfixes 2007-05-15 08:07:07 +00:00
adamdunkels 434a6376d7 Added nullmac 2007-05-15 08:06:07 +00:00
adamdunkels 5728570aa4 A 'null' MAC protocol that does not do anything 2007-05-15 07:40:22 +00:00
adamdunkels 336246f406 Makefile 2007-04-07 05:43:52 +00:00
adamdunkels d335cb8087 Power saving MAC protocol based on X-MAC [SenSys 2006] 2007-04-07 05:43:31 +00:00