Oliver Schmidt
4f28289df2
Added a pfs_remove() function and a pfs_seek() stub to the Commodore platforms.
...
- "Normalized" some Assembly code.
- Implemented CFS_APPEND in pfs_open().
- Made CFS_WRITE work in VICE's virtual disk/file system.
2016-03-28 14:07:35 +02:00
Joakim Eriksson
ee97dc4bcd
tuned configuration for rpl-collect and micaz platform
2016-03-26 09:45:39 +01:00
Joakim Eriksson
37c5f741e9
removed viztool usage of learned-from routing state that was removed
2016-03-26 09:45:37 +01:00
George Oikonomou
de2ecf8e3a
Document that LaunchPads can be programmed with cc2538-bsl
2016-03-21 00:00:38 +00:00
Michael LeMay
93126b57bb
x86, galileo: Use IMRs to restrict DMA
...
This patch configures Isolated Memory Regions (IMRs) to block DMA to
code and data regions that do not contain any data that needs to be
DMA-accessible.
2016-03-17 08:35:49 -07:00
Michael LeMay
58a00b7c23
x86, galileo: Add driver for Isolated Memory Regions (IMRs)
...
The Intel Quark X1000 SoC includes support for Isolated Memory Regions
(IMRs), which are specified using range registers and associated
control registers that are accessible via the message bus. This patch
adds a driver for accessing those registers.
2016-03-17 08:35:49 -07:00
Michael LeMay
25c07613c2
x86: Add driver for message bus
...
The Intel Quark X1000 SoC includes a message bus that is accessible
via PCI configuration registers. It communicates to various SoC
components such as the Isolated Memory Region (IMR) registers and the
Remote Management Unit. This patch adds a driver for accessing the
message bus.
2016-03-17 08:35:48 -07:00
Nicolas Tsiftes
9ab327090c
Merge pull request #1444 from mdlemay/galileo-always-init-gpio
...
galileo: Enable I2C and GPIO interrupt sharing and centralize their initialization
2016-03-14 20:09:40 +01:00
Nicolas Tsiftes
862e43d9b0
Merge pull request #1523 from Zolertia/pull/z1-apify-sensors
...
Adapt Z1 on-board sensors to Contiki's API
2016-03-14 17:10:46 +01:00
Simon Duquennoy
1ffbafeaa6
Merge pull request #1375 from myrfy001/myrfy001-patch-1
...
off_t changed to signed to stay the same as POSIX
2016-03-14 16:42:13 +01:00
thomas-ha
400a09e82c
comment
2016-03-11 11:05:04 +01:00
Robert Olsson
39094e3c41
CO2 sensor bug fix
2016-03-08 20:04:01 +01:00
thomas-ha
0e0dba932f
disable TSCH HW frame filtering
2016-03-08 15:52:40 +01:00
thomas-ha
9ac14d1c7b
defines needed for TSCH
2016-03-07 18:39:13 +01:00
Simon Duquennoy
dea04c67d7
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-07 17:47:44 +01:00
Robert Olsson
07ec06ad09
Setting node_id and RIME linkaddr from EUI64 chip.
2016-03-06 21:37:25 +01:00
Oliver Schmidt
8b3d220761
Merge pull request #1542 from oliverschmidt/master
...
Adjusted segment names to match recent cc65 change.
2016-03-06 21:29:50 +01:00
Oliver Schmidt
6876b97466
Adjusted segment names to match recent cc65 change.
2016-03-06 21:11:18 +01:00
Nicolas Tsiftes
fbf3aba152
Merge pull request #1513 from mdlemay/check-newlib-conf
...
galileo: build_newlib.sh: Exit on configuration error
2016-03-03 13:39:27 +01:00
Nicolas Tsiftes
da5044acb2
Merge pull request #1514 from mdlemay/newlib-filter-patches
...
galileo: build_newlib.sh: Only apply patch files with the extension ".patch"
2016-03-03 13:38:56 +01:00
Atis Elsts
9f1fedfbc1
avr-rss2 platform examples: remove some binary files
2016-02-23 11:59:29 +02:00
Atis Elsts
d8f2129b17
avr-rss2 platform: Update README.md
2016-02-23 11:59:09 +02:00
Robert Olsson
ce8e87d60e
Adding the avr-rss2 platform based on AtMega256RFR2
2016-02-22 20:46:07 +01:00
Aitor Mejias
56aeb7cd7e
Added Zolertia Zonik sound sensor test and drivers
2016-02-22 16:49:35 +01:00
Antonio Lignan
934cdbacca
Adapted the ADXL345 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
Antonio Lignan
1be30d52dc
Removed unused blocks and made functions static
2016-02-22 12:08:56 +01:00
Antonio Lignan
151f532225
Adapted the TMP102 sensor to Contiki's sensor API
2016-02-22 12:08:56 +01:00
Michael LeMay
58874ea25d
x86, galileo: Refactor I2C and GPIO initialization
...
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.
This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration. Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
2016-02-16 21:19:44 -08:00
Michael LeMay
c815fa4511
x86: Use shared ISR for I2C and GPIO
...
This patch permits interrupts to be generated by both the I2C and GPIO
controllers for simultaneously-executing applications. The controllers
share a single interrupt pin, INTC. Prior to this patch,
quarkX1000_gpio_init() routed INTA to PIRQC and IRQ 10 (due to an
incorrect assumption that INTA is connected to the GPIO controller),
and quarkX1000_i2c_init() routed INTC to PIRQC and IRQ 9. The I2C
controller initialization is a prerequisite for GPIO initialization,
so the final configuration was that INTA and INTC were both routed to
PIRQC and IRQ 10. Thus, only the GPIO ISR was being invoked, even if
the I2C controller was actually responsible for the interrupt.
This patch refactors the I2C and GPIO ISR setup and handler code so
that the shared portions are combined in
cpu/x86/drivers/legacy_pc/shared-isr.[ch]. The I2C and GPIO drivers
communicate their interrupt information to the shared component by
placing structures in a specific section of the binary.
2016-02-16 21:19:44 -08:00
Michael LeMay
66629ae58f
galileo: build_newlib.sh: Exit on configuration error
...
This patch adds a check for the result of the newlib configure command
and immediately exits the build_newlib.sh script if configure fails.
2016-02-16 11:36:57 -08:00
Toni Lozano
2cbde75b02
Removed PM10 code lines from adc-sensors driver
2016-02-15 14:45:26 +01:00
Antonio Lignan
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
Wojciech Bober
d39ad95db5
nrf52dk: platform support
2016-02-15 09:37:38 +01:00
Antonio Lignan
25ff850a43
Weather meter: replaced rtimer by ctimer as it was breaking contikimac
2016-02-13 22:33:05 +01:00
Michael LeMay
16145f645a
galileo: build_newlib.sh: Only apply patch files with the extension ".patch"
...
This avoids treating as patches other files that may happen to be
present in the newlib patch directory in a working tree.
2016-02-12 13:45:25 -08:00
Simon Duquennoy
ebdc536d61
Merge pull request #1496 from simonduq/pr/jn516x-serial-input
...
jn516x enable serial input whenever there is no fallback interface
2016-02-04 10:02:15 +01:00
Simon Duquennoy
f87f7e7edd
jn516x enable serial input whenever there is no fallback interface
2016-02-03 17:53:29 +01:00
Simon Duquennoy
658cf0d2cc
Reworking jn516x default configuration and examples
2016-02-03 10:35:48 +01:00
Nicolas Tsiftes
eef96f3ba7
Merge pull request #1480 from mdlemay/revise-clang-flags
...
galileo: Revise include flags for LLVM Clang
2016-02-01 14:25:53 +01:00
Simon Duquennoy
7c3108bf3b
jn516x: flush only uart Tx FIFO in main loop, leaving Rx FIFO intact
2016-02-01 13:36:18 +01:00
Antonio Lignan
35345cdb40
Fixed casts and calculations for the wind direction circular averaging
2016-01-31 22:51:08 +01:00
George Oikonomou
deb633216c
Document support for the CC2650 LaunchPad
2016-01-28 11:23:20 +00:00
George Oikonomou
387bb96ca4
Add support for the CC2650 LaunchPad
2016-01-28 11:23:20 +00:00
George Oikonomou
5eb0470ad4
Move the SPI and Ext Flash Driver to a common directory
...
This commit creates a `common` directory, aimed to host drivers supported by multiple boards of the CC13xx/CC26xx family.
We move the Sensortag SPI and External Flash drivers to this location and we change the Sensortag build system to pull the respective files from therein.
2016-01-28 11:23:20 +00:00
George Oikonomou
24871b0702
Extend the Sensortag external flash Driver to support more parts
...
The driver currently supports two Winbond external flash parts with identical instruction sets. The instruction set of the Macronix MX25R8035F appears to be a superset. We therefore change the driver to add the MID/DID of the Macronix to the list of supported parts.
This will subsequently allow us to share the same driver for both the SensorTag and the CC2650 LauchPad.
2016-01-28 11:23:19 +00:00
George Oikonomou
7d6966b22c
Merge pull request #1483 from Zolertia/pm10-sensor
...
Added PM10, VAC and AAC sensor drivers
2016-01-27 11:47:07 +00:00
Toni Lozano
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
Michael LeMay
6557194fc5
galileo: Revise include flags for LLVM Clang
...
This patch revises the compiler flags when LLVM Clang is in use to
cause Clang to automatically use its built-in header files rather than
those for GCC.
2016-01-25 14:01:16 -08:00
Antonio Lignan
9f1376d37a
Merge pull request #1453 from g-oikonomou/contrib/test-with-arm-gcc-5
...
Change travis arm tests to use gcc-arm-embedded v5
2016-01-25 21:32:28 +01:00
Toni Lozano
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00
Antonio Lignan
d4251d7c3b
Merge pull request #1470 from alignan/pull/grove-rgb-backlight-lcd
...
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-25 09:54:25 +01:00
George Oikonomou
9e9e6d07b0
Adjust READMEs to point explicitly to the arm-gcc version used by travis
2016-01-24 13:59:19 +00:00
Antonio Lignan
9a5682b75b
Merge pull request #1476 from alignan/pull/update-weather-meter
...
Updated to new adc-zoul renaming
2016-01-23 16:20:22 +01:00
Antonio Lignan
246b01095f
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-23 15:52:29 +01:00
Antonio Lignan
66ebca3ade
Updated to new adc-zoul renaming
2016-01-23 15:42:13 +01:00
Antonio Lignan
9a80c0098f
Added zero-calibration function and added offset values to the structure
2016-01-22 16:58:46 +01:00
Antonio Lignan
426fa24e50
Clear interrupt and trigger callback if new data is generated
2016-01-22 16:58:46 +01:00
Antonio Lignan
f5b52e8094
Ported Grove's 3-axis gyroscope sensor (based on ITG-3200)
2016-01-22 16:58:46 +01:00
Antonio Lignan
6351462e89
Unified BMP180 and BMP085 drivers
2016-01-22 16:11:49 +01:00
Antonio Lignan
ec45369d1b
Merge pull request #1466 from alignan/pull/weather-meter
...
Add driver for the Sparkfun Weather meter station
2016-01-22 15:18:14 +01:00
Adam Dunkels
7128a6a178
Merge pull request #1258 from joakimeriksson/multiple-reassembly-fix
...
6LoWPAN - multiple reassembly fix and cleanup
2016-01-22 07:15:18 +01:00
Antonio Lignan
98ed8a29a0
Removed harsh restriction on mask values and disabled debug flags
2016-01-19 22:28:09 +01:00
Antonio Lignan
a6c30b4e09
Fixed missing static keyword in both zoul-demo and weather meter driver
2016-01-19 22:24:53 +01:00
Antonio Lignan
366f11d5df
Uncrustified weather meter driver and example
2016-01-19 18:03:16 +01:00
Antonio Lignan
81bec49a40
Changed fixed 2 minute integration period to allow overriding
2016-01-19 18:00:18 +01:00
Antonio Lignan
0902e0fc6d
Added degree converted value for the wind vane sensor.
...
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
2016-01-19 17:47:46 +01:00
Antonio Lignan
61f1516369
Reworked instant wind speed calculation and extended the available wind speed return values
2016-01-19 17:47:46 +01:00
Antonio Lignan
0cb80b0605
Prevent calculations if tick is zero
2016-01-19 17:47:46 +01:00
Antonio Lignan
aacbcd904f
Added interrupt configuration for the weather meter
2016-01-19 17:47:46 +01:00
Antonio Lignan
103911f619
Added driver for the Sparkfun's weather meter station
2016-01-19 17:47:46 +01:00
Joakim Eriksson
d4dc45e096
updated sicslowpan documentation and platform configurations
2016-01-19 15:27:14 +01:00
Antonio Lignan
2295ecdbd9
Renamed adc-sensors/adc-wrapper to adc-zoul/adc-sensors, to have a better wording reflecting the intented use
2016-01-17 23:04:34 +01:00
Antonio Lignan
503abb4415
ADC wrapper for the Zoul-based platforms, allows to add analogue sensors over the existing adc interface
2016-01-17 22:40:06 +01:00
Antonio Lignan
ac07e848b7
Minor fixes to file descriptions and disable DEBUG switches
2016-01-17 21:52:34 +01:00
Antonio Lignan
2bb7ac9cc0
Merge pull request #1451 from g-oikonomou/bugfix/sensortag/select
...
Rename select() in various sensortag sensor drivers
2016-01-17 00:08:37 +01:00
Michael Klemm
a40e28a7c8
Fixed using target AVR ATmega128RFA1
...
Set operating speed to 16MHz and added missing dependency to llsec.
This fix was tested with sparkfun ATmega128RFA1 Dev Board.
2016-01-16 12:45:21 +01:00
Antonio Lignan
99f0c9f19b
Merge pull request #1457 from alignan/pull/motion-sensor
...
Add support for digital motion/presence sensors
2016-01-11 20:30:09 +01:00
Antonio Lignan
57f4134c9e
Merge pull request #1454 from alignan/pull/sht25-sensor
...
Fixes and enhancements for the SHT25 sensor
2016-01-11 20:29:14 +01:00
Antonio Lignan
94657b7a72
Merge pull request #1449 from alignan/pull/bmp085-sensor
...
BMP085 barometric sensor for the RE-Mote platform
2016-01-11 20:28:35 +01:00
Antonio Lignan
c644a32dc7
Added support for digital presence/motion sensors
2016-01-11 18:36:31 +01:00
Antonio Lignan
fefb84596e
Fixed filter value preventing from initializing the ADC
2016-01-11 17:21:23 +01:00
George Oikonomou
c394302c44
Merge pull request #1446 from alignan/pull/tsl2563-sensor
...
Enhanced TSL2563 driver for the Zoul module (RE-Mote/Firefly)
2016-01-11 11:21:51 +00:00
Antonio Lignan
48eb2a4fe2
Uncrustify changes
2016-01-10 23:36:00 +01:00
Antonio Lignan
d53a62187d
Added extra features of the SHT25 sensor
2016-01-10 23:33:33 +01:00
Antonio Lignan
97a7e98ac5
Fixed SHT25 sensor
2016-01-10 23:33:33 +01:00
Antonio Lignan
564c3a9d28
Fixed pressure calculation as previous temperature compensation was missing
2016-01-10 21:37:03 +01:00
George Oikonomou
6933b35bb5
Rename select() in various sensortag sensor drivers
...
This is to prevent a compile error caused by function prototype conflict between a function called `select()` (present in a number of sensortag peripheral drivers) and the one in `sys/select.h`. The error manifests itself with gcc-arm-embedded version 5.2.1 20151202 (2015-q4).
To fix the error we simply rename our function.
Fixes #1434
2016-01-10 15:47:34 +00:00
George Oikonomou
fa40d2b1fc
Remove documentation references to the Sensinode platform
...
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:09:31 +00:00
George Oikonomou
707353f71b
Remove Sensinode platform, cpu, example and tools files
...
This is part of a set of commits that will obsolete the Sensinode platform
2016-01-10 15:01:58 +00:00
Antonio Lignan
7b953091e5
Added BMP085 barometric sensor for the Zoul platform
2016-01-10 04:17:26 +01:00
Antonio Lignan
7abee394cb
Initialized interrupt thresholds and added missing check
2016-01-10 04:09:07 +01:00
Antonio Lignan
a8a1ebf8b5
Added interruption feature to the TSL2563 driver
2016-01-08 15:14:37 +01:00
Benoît Thébaudeau
0eab95ec4c
Merge pull request #1443 from bthebaudeau/cc2538-new-aes-modes
...
cc2538: Complete support of hardware AES modes of operation
2016-01-07 23:27:06 +01:00
Simon Duquennoy
edf85dc1f2
Merge pull request #1445 from TeVeDe/master
...
Changed NXP maintainers for JN516x platform
2016-01-07 14:45:24 +01:00
Antonio Lignan
881e78cb60
Rewamped TSL2563 light sensor
2016-01-07 12:53:31 +01:00
