deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
8172 commits 6 branches 13 tags 80 MiB
Commit graph

886 commits

Author SHA1 Message Date
George Oikonomou 88c6689e38 cc2430: Build with --fomit-frame-pointer 2012-09-20 15:09:15 +01:00
Niclas Finne 767e8bb551 Default value for _DATA20_HEAP_SIZE when using the IAR compiler on MSP430 platforms 2012-09-20 14:01:56 +02:00
Niclas Finne 4630945475 Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms 2012-09-19 22:49:19 +02:00
George Oikonomou ee7af77ca9 Reworked the cc2530 stack debugging facilities: 
- Moved to their own file
  (so we can later copy the entire thing over to cc2430)
- Renamed the functions
  (for naming convention reasons)
- The entire thing can be enabled/disabled
- Added a couple more macros
- Hooked into main()
 2012-09-07 17:40:17 +01:00
Philippe Rétornaz 9a63e8c027 cc253x: Add stack monitoring helpers 2012-09-07 17:32:54 +01:00
Philippe Rétornaz 48d99f15c8 cc253x: fix dma interrupt enable flag 2012-09-07 17:32:54 +01:00
George Oikonomou c6ec22c4c8 cc2530: Added a method to maximise stack depth 
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
 2012-09-07 17:32:53 +01:00
Philippe Rétornaz 666ff6ca55 cc253x: use a uint8_t for sleep_flag 
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
 2012-09-07 17:32:10 +01:00
Philippe Rétornaz 44bcabe89c cc253x: Change CFLAGS 
This add -fomit-frame-pointer by default, it decrease sliglty the
stack usage when several function call are nested.
On some specific case 30 bytes could be saved on the stack.
 2012-09-07 17:32:10 +01:00
George Oikonomou 8699f7741d Fixed typos and a stray printf. Adjusted comments 2012-09-07 17:31:25 +01:00
Ivan Delamer b43dad00b0 Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES 
#defines.
 2012-09-04 11:12:18 -06:00
Ivan Delamer 2e72ec3594 Place ATmega1281 define in correct section (it does have compare C 
unit, avoid duplicate define and compiler warning).
 2012-09-01 15:22:13 -06:00
Ivan Delamer 5636357243 Fix RF230 transition: RX_AACK_ON -> TX_ARET_ON (go through PLL_ON, 
as per datasheet). Tested on RF230 and 128RFA1 (RF231).
 2012-09-01 15:20:00 -06:00
George Oikonomou 26a87ee9cb Improved handling of cc2x3x rf_flags 2012-07-11 10:53:14 +01:00
George Oikonomou 43f2790357 Added channel_get() to the cc2x3x RF drivers 2012-07-11 10:53:14 +01:00
George Oikonomou d66241fd97 Bugfixed the cc2530 LOW_POWER_RX configuration 
Report and fix by Tom Xiao
 2012-07-11 10:53:14 +01:00
George Oikonomou 62fbd389d8 Renamed a cc253x SFRX to stop namespace conflicts 
The TR0 SFRX can not use the name TR0 because it
conflicts with TCON.TR0 on the default 8051.

See SDCC bug 3513300
 2012-07-11 10:53:14 +01:00
George Oikonomou 4b73b48f60 Fixed the cc2530 RSSI adjustment 2012-07-11 10:53:14 +01:00
Ivan Delamer 17a62a649c ATmega128RFA1 bug fix: no interrupt pin used (embedded radio). 
Enabling interrupt caused MCU reset if using pin as GPIO.
 2012-07-10 14:36:47 -06:00
Niclas Finne 418a5772e6 Removed leds debug output 2012-06-07 10:35:22 +02:00
George Oikonomou 47db065034 Bugfixed the cc253x UART0 init (Thanks, Deng Jian) 
The flush instruction was resetting the stop bit level to 'low'
 2012-06-06 15:25:57 +01:00
David Kopf e9a55cc222 Enable check on received length to prevent buffer overflow. Thank you Cooja! 2012-05-28 13:02:23 -04:00
George Oikonomou 259b497122 Minor Sensinode build cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou 1f7171f943 Adjust cc2x3x ports to the new clock API 2012-05-16 15:22:31 +01:00
George Oikonomou 0d4b90c42b cc2530 watchdog improvements and cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou 274a5ebb9c Fixed a typo which was preventing the cc253x watchdog from starting 2012-05-16 15:22:30 +01:00
Laurent Deru 56914963ef Reactivate flash protection after maca init 2012-05-09 10:24:38 -04:00
Mariano Alvira a4813d815f use --gc-sections instead of -gc-sections 2012-05-06 12:19:20 -04:00
Mariano Alvira 4acad929f0 add gc-sections, roughly 4kB savings. 2012-05-06 09:24:06 -04:00
David Kopf d6dc216e02 Reorder includes to prefer platform routines. Remove redundant RPL define. 2012-04-27 16:54:09 -04:00
George Oikonomou dd26accc07 We can now use SDCC's __nonbanked feature 
This allows us to reduce CODE footprint of SDCC projects
built with --model-huge. Use carefully!

* Added a facility which allows us to enable/disable the
  feature from the CPU dir (CC_CONF_NON_BANKED_OPTIMIZATION)
* Added the CC_NON_BANKED keyword to some platform files
  (expands to __nonbanked)
* Started using this for some examples
 2012-04-26 15:28:43 +01:00
Adam Dunkels b85bc3379c Bugfix in clock_wait() declaration. Various style fixes. 2012-04-22 20:54:29 +02:00
George Oikonomou e95f94a9a8 Added support for reading MAC from the cc253x flash 
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
 2012-04-20 16:03:38 +01:00
George Oikonomou 29090a3dda The cc253x Makefile specifies SoC flavor 
This will help us slowly add better support for smaller SoCs
instead of just assuming that all cc253x SoCs are F256

- We build for F256 by default but the project Makefile can override this
- We currently ignore this when passing --code-size. This is a ToDo
- The bank allocator always assumes 7 banks. Once we fix --code-size above this will be irrelevant
 2012-04-20 16:03:38 +01:00
George Oikonomou 6fb48174ba Fixed a documentation typo 2012-04-20 16:03:37 +01:00
Niclas Finne 1b13b69814 Added support for mspgcc 4.6+ that no longer supports generic MCU identifiers such as msp430x1611 2012-04-10 16:05:10 +02:00
Niclas Finne 57a166c3db Corrected compiler flags for the IAR compiler 2012-04-10 15:27:44 +02:00
David Kopf cac4e9a222 Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t. 
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
 2012-04-09 15:49:53 -04:00
David Kopf 40bd020394 Fix wrong register addresses. 2012-04-09 09:58:12 -04:00
George Oikonomou 57969259ce cc2x3x clock_delay(len) now delays for approx. len usecs 2012-04-03 16:26:11 +01:00
George Oikonomou 3cb26adeda Added an ASM(foo) macro for cc243x 2012-04-03 16:26:11 +01:00
George Oikonomou 242e02658f The cc2530 UART driver was sending a 0 down the line on init 2012-04-03 16:26:10 +01:00
George Oikonomou b3de052e01 Ported the stack-friendly clock ISR code over from cc243x to cc253x 2012-04-03 16:26:10 +01:00
George Oikonomou 11a7f644ac Comment rewording and formatting 2012-04-03 16:26:10 +01:00
George Oikonomou ce17fa131c Stack-friendly cc243x clock ISR enabled by default 
This new approach (CLOCK_CONF_ACCURATE=0) was not as inaccurate
as originally thought. In fact, it has pretty much the same
accuracy as the old, stack-hungry version.

* Renamed the define from CLOCK_CONF_ACCURATE (1: old) to
  CLOCK_CONF_STACK_FRIENDLY (1: new) to stop implying
  that one is more accurate than the other.
* Using CLOCK_CONF_STACK_FRIENDLY by default.
 2012-04-03 16:26:10 +01:00
George Oikonomou 924fe934c1 Deleted obsolete macros. Minor formatting 2012-04-03 16:26:10 +01:00
George Oikonomou ffa3a1c4c3 cc2x3x clock driver cleanup 
* Bit-Addressable SFRs are now accessed as such,
  instead of (N)OR-ing the byte
* A routine was declared as CCIF but not defined as such. Fixed
* Deleted a leftover duplicate define
* Formatting
* Comment updates and clarifications
 2012-04-03 16:26:10 +01:00
simonduq 930c7c25bc fixes in mb851 and stm32w108: erroneous linking with mpu.o, conf file, 
more printouts in main when ipv6 is used, and a target for memory
profiling taking stm's gnu.ld static stack size into account
 2012-04-03 11:47:30 +02:00
George Oikonomou 5240519dd9 Renamed a config define to better match contiki's naming philosophy 2012-04-02 11:38:54 +01:00
George Oikonomou bce34e4b9a For cc2x30, moved CLOCK_CONF_SENCOND to the cpu dir. 
The value is not really configurable by the platform so having it
in contiki-conf.h didn't make huge sense.
 2012-04-02 11:22:19 +01:00
George Oikonomou d958ee3125 Deleted the old Sensinode 'read mac from flash' routine. 
Since the introduction of a purpose-written routine, the old
generic one (which was written in asm) was never being used.
There was a configuration directive which allowed us to switch
between the two. All references to this configuration directive
have also been removed.
 2012-04-02 11:21:32 +01:00
George Oikonomou 5d8f63a61b We've not been using the cc2430 converter for a while now 2012-04-02 11:03:49 +01:00
George Oikonomou 7854ee499a Wrapped cc2x30 SOFT_RESET() macro inside do {...} while(0) 2012-03-29 13:11:04 +01:00
George Oikonomou 5afdd19403 Adjusted check to determine if we are being built with SDCC 
Since rev #7342, SDCC defines __SDCC_mcs51 instead of SDCC_mcs51.
We check for either
 2012-03-29 13:10:25 +01:00
George Oikonomou 4f1e251603 Some uN_t had crept back in cc2530dk and sensinode. 
Changed to uintN_t plus a bit of code formatting
 2012-03-29 13:10:10 +01:00
simonduq 946f00bf7b stm32w: added ability to upload and reset all connected boards, and login using MOTE=x 2012-03-26 23:00:44 +02:00
simonduq 95ae5c5d51 avoid unnecessary symbols.c/h copying 2012-03-26 23:00:43 +02:00
George Oikonomou ad256e5014 New platform: TI cc2530 Development Kit 
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
 2012-03-23 14:41:07 +00:00
George Oikonomou b7674c3636 Reincarnate the sensinode/cc2430 port 2012-03-23 14:41:07 +00:00
simonduq e4fb360262 stm32w platforms: contikimac support in the Rime case, with EUI-64 2012-03-20 17:30:59 +01:00
simonduq 5da4463236 adding ducy cycling support to the stm32w-based platforms (patch by Chi-Anh La) 2012-03-20 17:29:58 +01:00
Niclas Finne ff7a977dc7 Improved support for the IAR compiler for the MSP430 platforms 2012-03-07 23:09:05 +01:00
Niclas Finne 684c3edfa6 Cross compiler interrupt service routine compatibility definitions for MSP430 based platforms based on isr_compat.h by Steve Underwood. 2012-03-07 23:04:52 +01:00
Niclas Finne 2eee14a1d8 Allow compiler flag SMALL to be set to disable SMALL-build. Patch by Andre Frimberger. 2012-03-06 15:35:20 +01:00
Ilya Dmitrichenko 49cd7878e3 Avoid deprecated error on Darwin. 2012-03-02 15:15:47 -05:00
Ilya Dmitrichenko 499d3052ee Fixed TARGET=native compilation issues on Darwin. 2012-03-02 15:15:42 -05:00
David Kopf 2b7ecefce7 Remove unused SPI initializer flag from AVR. Comment out in the msp-430 template. 2012-02-27 17:05:22 -05:00
Ilya Dmitrichenko 9c99d46e24 Simplified host OS platform detection in Makefiles 2012-02-25 10:09:33 -05:00
David Kopf deb75d3d97 Several bugfixes 2012-02-21 11:14:52 -05:00
David Kopf 59e459e0e9 Add missing mtarch_stop function 2012-02-21 11:11:53 -05:00
David Kopf 6e45dfe5ff PROGMEM changes needed for newer avr-gcc compiler 2012-02-21 11:10:57 -05:00
Nicholas J Humfrey 1cda3da17e Converted u8_t to uint8_t and u16_t to uint16_t in the cpu directory. 2012-02-21 08:33:24 -05:00
Mariano Alvira 68591919e6 mc1322x: add -MMD to Makefile.mc1322x to correctly create dependencies 2012-02-16 11:17:15 -05:00
Mariano Alvira 43062b6d74 mc1322x: change how board.h works to allow default board.h (defaults 
to econotag)
 2012-02-13 10:01:36 -05:00
Mariano Alvira ee8f2c669e mc1322x: remove symbols.{c,h} 2012-02-13 10:01:36 -05:00
David Kopf 9d6542d49b Fix minimal-net webserver6, broken after native border router changes. 2012-02-11 15:03:24 -05:00
David Kopf 38267bfd5a Webserver-nano: Add page load times, remove workaround code for bug in arm strformat.c, correct the double count of leading zeros there. 2012-02-11 14:58:35 -05:00
David Kopf 987906be97 rf230bb updates: involves setting the 801.15.4 pending bit, 
0x800000 cpu clock, and a jtag reset bugfix
 2012-02-01 14:16:39 -07:00
Ivan Delamer 57e686179c Improved rf230bb.c synchronization/locking. Removed unnecessary locks 
during Tx (single-threaded environment). Added protection to Rx thread
from buffer access by ISR.
 2012-02-01 13:37:45 -07:00
David Kopf 7ca141b457 Access uart registers directly instead of through intermediate addresses in a RAM struct. 
Add a platform define to reduce the number of ports supported by the cpu.
 2012-01-21 13:49:58 -05:00
Niclas Finne f26920ae9b Define the BV macro if not already defined 2012-01-11 08:46:16 +01:00
David Kopf 58298f59db Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal 
Add MCU_CONF_LOW_WEAR option to avoid eeprom writes during development.
 2012-01-10 12:42:27 -05:00
Niclas Finne f3db12c19d MSP430 setup for f2xxx based on Z1 2012-01-09 14:56:03 +01:00
Niclas Finne 9ffcd53868 Fixed compiler warning (with IAR compiler) 2012-01-09 14:56:00 +01:00
Niclas Finne 3daa822f89 Moved configuration of memcpy workaround to cpu (only needed for an older version of mspgcc) 2012-01-09 14:55:57 +01:00
Niclas Finne fd81a0d393 Minor cleanup (avoid setting some compiler flags twice) 2012-01-09 14:55:54 +01:00
Niclas Finne 8e1e12dfd3 Ignore SMALL when using IAR compiler 2012-01-09 14:55:48 +01:00
Nicolas Tsiftes eba64bdc5e Be more explicit with the relationship between inheritance between MSP430 families. 2012-01-09 14:55:45 +01:00
Niclas Finne cdfa8708e3 * Added f2xxx for two series (for example z1) 
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
 2012-01-09 14:54:57 +01:00
Niclas Finne f4f84ffca4 Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X 2012-01-09 14:54:01 +01:00
Niclas Finne 09082f02fe Changed clock_delay to use the nop instruction 2012-01-09 14:49:39 +01:00
Niclas Finne cd4be4927a Fixed quick dco sync to also work with mspgcc 2012-01-09 14:41:42 +01:00
Niclas Finne 708f9d77d2 Corrected timing for higher CPU speed 2012-01-09 14:41:36 +01:00
Niclas Finne 05b10eb9ce Initial WiSMote port based on code from Arago Systems. 2012-01-09 12:25:06 +01:00
Niclas Finne 367c82a5ab added compiler flags and macros for IAR and mspgcc 4.4.5 compilers 2012-01-09 12:24:33 +01:00
David Kopf b251619a2f Add wpcap for cygwin/Windows native border router 2012-01-08 13:37:56 -05:00
Fredrik Osterlind 2644057fb2 using dma by default 2011-12-21 10:53:18 +01:00
David Kopf 81af871db9 Bugfix: use 16 bit tick count to adjust clock after sleep 2011-12-01 09:58:55 -05:00
Oliver Schmidt e38f008b9b The dependency on the ucontext functions has the potential to keep others from successfully using cpu/native for other platforms. As the Contiki multithreading library typically isn't used at all it's not worth the trouble. So we just limit it to Windows and Linux - where it is known to not only build but actually work. If someone needs the Contiki cpu/native multithreading library on another platform he's certainly welcome to add that platform - hopefully by just activating the codepath that we now made exclusive for Linux for his platform. 2011-11-30 23:41:39 +01:00
David Kopf fb977cb9ef Better fix for hardware FCS error on JTAG reset 
Correct silly error introduced by trying to save two bytes.
 2011-11-15 13:24:58 -05:00