Commit graph

116 commits

Author SHA1 Message Date
nvt-se 1fdb3c21f0 fixed problems with uart and sd cards. 2008-10-28 12:42:53 +00:00
nvt-se 9c3f5beec7 added a small guide. 2008-09-26 18:14:12 +00:00
nvt-se 37fa4da899 support 9600 baud 2008-09-19 12:18:04 +00:00
nvt-se deefb97c16 Changed clock value so it is a power of two. 2008-08-14 11:11:34 +00:00
nvt-se f83000af8a clear bit when uart edge is set. 2008-05-29 22:06:18 +00:00
nvt-se 36fec8dd01 moved sdspi.c to the sd file list. 2008-05-29 22:04:30 +00:00
nvt-se 44c93fcd93 cleared lock semantics 2008-05-28 13:17:08 +00:00
nvt-se fed62e1642 added timeout 2008-05-27 14:22:55 +00:00
nvt-se 07f8875963 added missing header 2008-05-27 14:05:09 +00:00
nvt-se f2c6f77f7d removed debug print 2008-05-27 14:04:15 +00:00
nvt-se ce84dce702 reset locks on forced mode switch 2008-05-27 13:05:52 +00:00
nvt-se 9c9c2573c3 lock UART for RS232 in putchar 2008-05-27 13:03:19 +00:00
nvt-se bff587e32c lock SPI bus when erasing 2008-05-27 13:01:27 +00:00
nvt-se a26bcf30f7 added SPI parameters. 2008-05-27 12:25:48 +00:00
nvt-se 73978e3133 only include sdspi.h if WITH_SDC is on. 2008-03-31 14:33:23 +00:00
nvt-se acf01a0c58 fixed compilation error. 2008-03-31 14:32:00 +00:00
nifi f916c7b130 initialize ctimer after initialization of process 2008-03-31 14:01:26 +00:00
nvt-se 067e4c3c06 include contiki-conf.h for type definitions. 2008-03-31 13:48:03 +00:00
nvt-se f7b3d9fc99 moved files to sd/ 2008-03-31 13:45:52 +00:00
nvt-se fdcc145150 added missing file. 2008-03-31 13:43:34 +00:00
nvt-se 2822ff7ddb made more conform with contiki indentation. 2008-03-28 23:03:05 +00:00
nvt-se 10cabda581 lock wait function from Michael Baar. 2008-03-28 16:06:28 +00:00
nvt-se bd8809d35d print information about the SD card, if existent. 2008-03-28 16:02:01 +00:00
nvt-se 6486460e3f locking bugfix from Michael Baar. 2008-03-28 15:59:58 +00:00
nvt-se 3fec8ee5e7 synced with newer version by Michael Baar. 2008-03-28 15:58:43 +00:00
nvt-se d5c8b18fc2 added accelerometer test with moving average. 2008-03-27 13:08:35 +00:00
nvt-se 5631c92416 use three different input channels for the accelerometer. 2008-03-27 13:04:59 +00:00
nvt-se 1d3bae48dd added sd card support. 2008-02-28 15:49:01 +00:00
nvt-se 2cc0135e35 cleaned up and fixed an error checking problem in the locking code. 2008-02-28 15:11:22 +00:00
nvt-se a06b85f74b adjusted uIP parameters. 2008-02-13 15:41:04 +00:00
oliverschmidt 2632f8f937 Removed finally unnecessary cast. 2008-02-10 22:36:36 +00:00
nvt-se f0891be218 added clear channel assessment timeout. long to begin with. 2007-12-20 14:44:31 +00:00
fros4943 d8f6f03edc moving radio init to init-net files 2007-12-20 13:43:24 +00:00
fros4943 d0997c2dab major bugfix: padding synch with zero 2007-12-20 13:36:59 +00:00
nvt-se abb2731ed7 corrected comparison when bits don't need shifting. 2007-12-20 10:48:01 +00:00
nvt-se 7a6a9e62e4 improved logic. 2007-12-19 13:25:41 +00:00
nvt-se 1f00c20815 state variable must be volatile. 2007-12-19 13:09:01 +00:00
nvt-se b4a8641dda removed printf's. 2007-12-18 15:27:43 +00:00
nvt-se f9d24f0d24 Wake up from sleep in the interrupt when the receiver process is going
to be polled.
2007-12-18 15:26:25 +00:00
fros4943 d21572da02 configurable port 2007-12-18 11:55:01 +00:00
nvt-se ab115e4b10 Removed deprecated function. 2007-12-17 20:18:29 +00:00
nvt-se 1566f55e04 use smaller payload buffer size and provision for synchronization word in
the total buffer.
2007-12-17 20:15:53 +00:00
nvt-se bcefffb0e7 set ev to valid value. 2007-12-17 18:48:50 +00:00
nvt-se 004143b6b8 set rxlen to zero before enabling interrupts. 2007-12-17 16:37:15 +00:00
nvt-se 2288cdecbb small cleanup. 2007-12-17 16:23:32 +00:00
nvt-se 2d5f331b34 new line. 2007-12-17 16:20:34 +00:00
fros4943 479d74ce6a added receiver process outside interrupt 2007-12-17 15:53:57 +00:00
fros4943 7886d51045 removed old dma_init 2007-12-17 15:47:55 +00:00
fros4943 3936e0c275 updated version 2007-12-17 15:47:40 +00:00
nvt-se 5f1ca4ccdf use synchronous transmission. 2007-12-17 15:26:47 +00:00