Commit graph

620 commits

Author SHA1 Message Date
Harald Pichler 560117e8f3 Merge branch 'contiki' into osd 2015-03-23 13:07:28 +01:00
Daniele Alessandrelli 799e9350a0 er-coap: add client-side support for CoAP Observe
Client-side support for CoAP observe is not compiled by default. To enable it, the COAP_OBSERVE_CLIENT macro must be defined equal to 1.
2015-02-24 22:46:48 +01:00
Harald Pichler d31ecbf486 Merge branch 'contiki' into osd 2015-02-18 10:04:47 +01:00
Jonas Olsson 1e92211613 Add MQTT 3.1 engine 2015-02-17 13:44:29 +01:00
George Oikonomou dd4f181cde Fix warnings caused by incorrect \defgroup, \addtogroup, \file 2015-02-15 20:11:09 +01:00
George Oikonomou 0b382a933a Fix warnings caused by unescaped special doxygen chars 2015-02-15 20:11:09 +01:00
Ralf Schlatterbeck 058ae7bae3 Alleged race-condition was a bug in receiver
Handling put-requests was missing a trailing \0 in the parsed string.
2015-01-27 10:43:03 +01:00
Ralf Schlatterbeck baaa2c5741 Factor/Fix generic resources
Now the old GENERIC_RESOURCE macros works again (but usage has changed).
Common resources (battery, leds, radio) are now in resources-common.
2015-01-21 15:41:21 +01:00
Harald Pichler 9efc5d41c1 Merge branch 'contiki' into osd 2014-12-29 08:20:00 +01:00
Harald Pichler 365fe31b02 coap 18 2014-12-29 08:16:47 +01:00
Harald Pichler df95393980 remove init pwm per default, switch moisture sensor on and off to save energy 2014-12-12 08:47:01 +01:00
Harald Pichler a02be51f08 Merge branch 'contiki' into osd 2014-12-07 15:24:00 +01:00
Simon Duquennoy bd4233a953 Cleanup packetbuf: use rime attributes and addresses only when rime is enabled. Saves 32 byte per queuebuf in the non-rime case. 2014-12-02 16:54:58 +01:00
Simon Duquennoy 415506c3f6 Doxygen fixes 2014-12-02 12:39:16 +01:00
Simon Duquennoy a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy 722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
Ralf Schlatterbeck ef06560465 Use PROCESS_PAUSE macro 2014-11-19 13:54:07 +01:00
Ralf Schlatterbeck abdf6f8c6b Refactor A/D conversion in adc.c
Now the necessary settings are in adc.h. Refactored to allow repeated
ADC reads without reinitialization. Arduino allows setting
analogReference, this is now also implemented.
ADC is now initialized to sane values in apps/arduino/arduino-process.c
dev/arduino/arduino-compat.h now has all hardware independent settings
for arduino (some moved from platform/osd-merkur/dev/hw-arduino.h).
turnOffPWM re-implemented with hw_timer, removed from wiring_digital.c
ADC-specific arduino stuff moved to arduino-compat.h
Arduinos wiring_analog no longer necessary.
arduino-sketch example now reads analog inputs 1 and 5 using analogRead.
2014-11-19 13:53:32 +01:00
Ralf Schlatterbeck d5284eebe1 Factor resources, fix time
Now there is a generic resource that can generate and parse
application/json as well as text/plain. It can be re-used, only the
from_string and to_string routines have to be written and the resource
properly set up. A new resource format is specified, see
GENERIC_RESOURCE in, e.g., examples/osd/pwm-example. This is now used in
all my examples, namely pwm-example, arduino-sketch, wallclock-time.

There was an off by one error for the month in time formatting (in
gmtime and localtime). And the leap-year computation was broken. Both
fixed now, so we get a correct date. For localtime we are still 2 hours
off because daylight saving isn't implemented yet.

Also renamed gmtime to utc.
2014-11-19 13:53:12 +01:00
Ralf Schlatterbeck 4f20df042f Fix leap year computation 2014-11-19 13:53:01 +01:00
Ralf Schlatterbeck c46d6afa39 Make Arduino timer stuff work on Contiki
New discovery: Contiki also uses timer 0. With almost the same interface
as Arduino. So we now completely get rid of wiring.c (only the main
file, the other wiring_xxx stay) and implement Arduino timer, delay, etc
in terms of the corresponding Contiki routines. Verified that now delay
works as expected. The LED in examples/osd/arduino-sketch blinks!

Before this, the arduino_init routine in wiring.c destroyed the timer-0
initialization of contiki, making both, contiki timer implementation
*and* contiki timer implementation fail if the arduino_init routine was
called. Now both work.

Squashed with following bug-fix commit.
2014-11-19 13:50:58 +01:00
Ralf Schlatterbeck b6be226e69 Add Arduino compatibility layer
We can now directly compile arduino sketches (.pde) files.
Arduino compatible analogWrite works now.
But there is still a long way to go, serial I/O and timer stuff (delay,
millis etc) currently don't work (not tested but I don't expect this to
work).
It can be used in an arduino sketch or in a normal contiki program.
We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's
Arduino compatible. If you need different frequencies see native timer
usage in examples/osd/pwm-example
In a contiki program you have to call arduino_pwm_timer_init to
initialize the timer before pwm works. The arduino sketch wrapper
already does this.
For running a sketch, see examples/osd/arduino-sketch
2014-11-19 13:48:05 +01:00
Ralf Schlatterbeck b4fb8c3f52 Add wallclock time handling
New application and new example.
We use the built-in timer routines and add an offset to get the
wallclock time. The offset can be set by time-changing routines
(currently only settimeofday).
We also maintain an offset for timezone handling but this isn't
currently fully implemented.
2014-11-19 13:43:45 +01:00
Enrico Joerns 85b494c16b [doc] Give files a common structure by placing license first (partial)
Followed by doxyen file and group tags.
This patch is only a first attempt to make provide a clean structure,
many more files require rework, too.
2014-11-10 23:54:49 +01:00
Enrico Joerns 9dd7f1d29a [doc] added faulty esb and msp430 references 2014-11-10 23:53:32 +01:00
Nicolas Tsiftes 7738cdd15e Avoid compilation warnings in Antelope. 2014-09-05 18:21:47 +02:00
Daniele Alessandrelli 21898f1e21 er-coap (observe): fix possible duplicate value for observe option in GET response and subsequent notification
Currently, the observe value for a response to a GET observe request is always set to zero. That may cause the subsequent notification to have the same observe value. In fact, that happens every time an observable resource is observed for the first time (since the obs_counter is implicitly initialized to zero).
This patch fixes such a problem by setting the observe option value of responses to obs_counter (and then incrementing it).
2014-08-24 19:07:36 +02:00
Roy Scheefhals 1058ea986a Changed the parameter 'char * data' of process_start to the
type process_data_t. This was an artifact when the choice was
made to use the void * type for the data parameter in processes.

Changed parameter 'void * data' of process_post_synch to
process_data_t for consistency.

Checked all the uses of process_start() in contiki and fixed casts
of the data parameter.
2014-06-12 13:40:28 +02:00
Matthias Kovatsch 969d512546 Removed references to missing DTLS implementation. 2014-05-15 20:29:05 +02:00
Matthias Kovatsch ee493dd6af Update to observe-13 (cancellation). 2014-05-15 20:29:05 +02:00
Lars Schmertmann 351ba413e2 Enabled forcing CON packet for observer notifications each 20 packets 2014-05-15 20:29:04 +02:00
Lars Schmertmann 386d708b56 Added function for easy block1 usage.
Fixed blocksize calculation when REST_MAX_CHUNK_SIZE != 2^x.
Added example for block1 + separate + block2.
2014-05-15 20:29:04 +02:00
Lars Schmertmann bb737f85ae Used Uncrustify and fixed Travis build errors. 2014-05-15 20:29:04 +02:00
Matthias Kovatsch 3dd5bd7a37 Renamed erbium to er-coap to avoid confusion and have a meaningful directory name. 2014-05-15 20:29:03 +02:00
Matthias Kovatsch 7d79b69ada Updated to CoAP Proposed Standard and removed draft versions. 2014-05-15 20:29:03 +02:00
Nelson Kigen 5edd6bc75b New MACRO for creating jsontree_array
This proposed MACRO simplifies jsontree_array declarations. It takes as arguments the name of the array and its size. ( I've modified the indention as requested )
2014-02-26 19:38:10 +01:00
Oliver Schmidt e16521e5c1 Merge pull request #550 from oliverschmidt/master
Avoid compiler warnings.
2014-01-31 16:22:53 -08:00
Oliver Schmidt a94e7e63e2 Avoid compiler warnings. 2014-02-01 00:46:57 +01:00
Adam Dunkels 45265249fc Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
Adam Dunkels b244f30480 Moved the ctk files from core/lib into core/lib/ and core/lib/libconio 2014-01-26 23:20:46 +01:00
Adam Dunkels 8eace27f9b Moved net/rime.h to net/rime/rime.h 2014-01-26 23:20:45 +01:00
Adam Dunkels 0fe08205e1 Moved the rimeaddr.[ch] code from the core/net/rime module to the core/net module, as it is used not only by rime code 2014-01-26 23:20:36 +01:00
Adam Dunkels 4cfe6c4a5e Moved the sht11 driver to its own module 2014-01-26 23:20:30 +01:00
Adam Dunkels 0b805e4763 Moved the cc2420 driver into a separate dev/cc2420 module 2014-01-26 23:20:27 +01:00
Adam Dunkels 5f3fe7f7c7 Updated include paths for the moved files under net/ 2014-01-26 23:20:23 +01:00
Oliver Schmidt 1f4613383f Added more flexibility to webbrowser -> wget forwarding.
- Up to now the CTK program handler was necessary to start wget and forward the URL. Now alternatively the webbrowser uses the underlying OS to exec wget.

- Up to now windowed CTK was necessary to display the acknowledge dialog. Now alternatively the webbrowser displays the acknowledge text and buttons right in the webpage area.

- For now the targets 'win32' and 'c64' make use of the new capabilities.
2014-01-24 16:09:30 +01:00
Adam Dunkels ae5a3f9f67 Bumped the version number from 2.6 to 3.x, which is to be used in the development branch 2013-12-12 17:33:18 +01:00
Nicolas Tsiftes 65392ce59e Merge pull request #474 from adamdunkels/push/cleanup-vnc
Remove the VNC client and server
2013-11-29 05:07:53 -08:00
Adam Dunkels 611c659e51 Removed the VNC/CTK server and the VNC viewer app 2013-11-28 14:10:47 +01:00
Adam Dunkels 0fd503af42 Removed the experimental checkpointing code 2013-11-28 14:09:17 +01:00