deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
5192 commits 6 branches 13 tags 80 MiB
Commit graph

1337 commits

Author SHA1 Message Date
adamdunkels 74da90a06b Don't count collisions as transmissions 2010-02-28 10:07:17 +00:00
adamdunkels f95a6cce85 Added function for obtaining packet queue length 2010-02-28 09:20:32 +00:00
adamdunkels 8fe15f7b45 New packet attribute for specifiying MAC layer retransmissions; reorder and commented packet attributes 2010-02-28 09:19:43 +00:00
adamdunkels 970a9eb9c7 Increased neighbor lifetime to allow for longer neighbor announcement intervals 2010-02-28 09:19:04 +00:00
adamdunkels 7165a3866f Significant rework of the Contiki data collection protocol: 
* the new version makes use of MAC-layer feedback so that bad paths
  can be identified quicker and then avoided.

* the new code uses transport layer ACKs that contain feedback from
  the collect protocol: when a packet cannot be forwarded due to lack
  of resources, the ACK contains a flag that indicates that the packet
  could not be forwarded. ACKs also contain the routing metric of the
  sender, which improves agility in face of rapid path changes.

* loop detection and management has been improved: with higher path
  metric agility, the system is more prone to short-lived routing
  loops. Instead of dropping looping packets, the new version adjusts
  the routing metric for the routes that exhibit loops so that the
  risk for future loops is reduced.

* make use of packet attributes to inform the MAC layer of how many
  times packets should be retransmitted.
 2010-02-28 09:18:01 +00:00
adamdunkels b6b4941871 Made the number of MAC-layer retransmissions configurable on a per-packet basis, via a packet attribute 2010-02-28 08:35:16 +00:00
adamdunkels ed88f487c8 Improved detection of link-layer ACKs; increased the time ContikiMAC waits when it has detected a link-layer ACK; increased the number of silence periods required to detect a CCA false positive 2010-02-28 08:33:21 +00:00
adamdunkels fa1a96636e Bugfix: the compile-time check for UIP_LLADDR_LEN previously generated a run-time error, when it should have generated a compile-time error 2010-02-28 08:30:39 +00:00
adamdunkels ba0e50a7b7 Set the default number of MAC layer retransmissions for IPv6 packets to 2 2010-02-28 08:29:42 +00:00
adamdunkels b9827d2b36 Bugfix: didn't correctly reset the pending flag when a packet was read from the radio 2010-02-25 16:06:44 +00:00
joxe 0ab2bc9a31 upgraded sicslowpan to hc-06 - no 48 bit multicast compression support yet 2010-02-25 15:50:58 +00:00
nifi b50d47fb80 added missing function in sicslowmac_driver 2010-02-23 22:45:11 +00:00
nifi 1cfcc8a73a Removed the combined name of CSMA and NETSTACK_RDC. The name of NETSTACK_RDC can be accessed separately if needed. 2010-02-23 20:42:45 +00:00
nifi c20047f657 Changed the network stack to use different structures for the different layers (network_driver, mac_driver, rdc_driver, radio_driver). This helps to avoid incorrect configuration. 2010-02-23 20:09:11 +00:00
adamdunkels bb62749de7 Made debug printfs optional 2010-02-23 18:49:58 +00:00
adamdunkels 0ab2ba433f Bugfix: the wrong callback pointer was passed to higher layers. 2010-02-23 18:49:45 +00:00
adamdunkels ed52586e18 Rework of parts of the ContikiMAC code based on input from experimental results. When channel check is triggered because of a false positive, the new version checks the radio several times to make sure that there really is an incoming packet. Otherwise, the radio is switched off. Cleaned up and removed old unused code. Added a few temporary debugging mechanisms and functions. 2010-02-23 18:49:05 +00:00
adamdunkels 50e1452564 Ugly workaround for internal error in mspgcc when applying the >= operator to two 32-bit values 2010-02-23 18:40:08 +00:00
adamdunkels 0c4c88ae66 Improved per-packet power profiling: if a packet is retransmitted, the new energy is added to the old energy so that it is possible to measure the full energy for all transmissions of the packet 2010-02-23 18:39:00 +00:00
adamdunkels ca0417a923 Added the MAC layer callback functionality so that the Rime network layer gets information from the MAC about the status of sent packets: were they successfully transmitted, or was there a collisions? How many retries were there? 2010-02-23 18:38:05 +00:00
adamdunkels f10eedab3e Added debug printout 2010-02-23 18:37:15 +00:00
adamdunkels 2d13fecea7 Improved backoff management: timer is now doubled on every transmission, until the using module calls the neighbor_discovery_start() function again. Don't cancel the transmission even if a lower value arrives (this fixes a problem with multi-hop ETX propagaion). 2010-02-23 18:36:50 +00:00
adamdunkels 0eade2886c Better loop handling: when a loop is detected, the neighbor to which the packet was originally sent gets an inflated ETX; made sure that collect without announcments work; increased timeouts, to work nicer in larger networks 2010-02-23 18:35:23 +00:00
adamdunkels a4d9d6651b Added the option to specify the old value to observers so that they can determine if the announcement should be sent out quicklier than otherwise 2010-02-23 18:32:44 +00:00
adamdunkels b746b7fc06 Reworked the Rime/Chameleon interface so that packets now always hit Rime before Chameleon. Chameleon is now only called by Rime. This makes packet sniffing easier, and allows for sniffing packets after their header has been processed by Chameleon, thereby making per-packet power profiling much easier to implement 2010-02-23 18:29:53 +00:00
adamdunkels d8cce42d28 Set the default radio driver to nullradio 2010-02-23 18:28:04 +00:00
adamdunkels 47578806b5 Removed semicolon from #define to allow the semicolon to be placed naturally after the macro is used 2010-02-23 18:27:04 +00:00
adamdunkels 4b04fdd328 Minor style fix 2010-02-23 18:26:26 +00:00
adamdunkels 1ee32c3074 Removed non-functional time synchronization code; added some experimental code for CCA checks (enabled CCA mode 1, a temporary development function for setting the CCA threshold); enable the possibility to switch off radio even if a packet is currently arriving 2010-02-23 18:24:49 +00:00
adamdunkels 5292005962 A null radio driver that does not do anything - useful in the native port and as a template for new radio drivers 2010-02-23 18:18:53 +00:00
adamdunkels 0b2b7bcdba Removed inadvertedly left-over include file 2010-02-18 23:52:34 +00:00
adamdunkels 5cf3b83733 Common initialization code for the netstack 2010-02-18 23:15:26 +00:00
adamdunkels a2664054c5 Always include netstack.h 2010-02-18 23:09:30 +00:00
adamdunkels f49ebfe1c4 Temporarily disabled rime route udp because it breaks with newest MAC interfaces 2010-02-18 21:53:08 +00:00
adamdunkels e34eb54960 A work-in-progress rework of the Contiki MAC and radio layers. The 
main ideas are:

* Separates the Contiki low-layer network stack into four layers:
  network (e.g. sicslowpan / rime), Medium Access Control MAC
  (e.g. CSMA), Radio Duty Cycling RDC (e.g. ContikiMAC, X-MAC), and
  radio (e.g. cc2420).
* Introduces a new way to configure the network stack. Four #defines
  that specify what mechanism/protocol/driver to use at the four
  layers: NETSTACK_CONF_NETWORK, NETSTACK_CONF_MAC, NETSTACK_CONF_RDC,
  NETSTACK_CONF_RADIO.
* Adds a callback mechanism to inform the MAC and network layers about
  the fate of a transmitted packet: if the packet was not possible to
  transmit, the cause of the failure is reported, and if the packets
  was successfully transmitted, the number of tries before it was
  finally transmitted is reported.
* NULL-protocols at both the MAC and RDC layers: nullmac and nullrdc,
  which can be used when MAC and RDC functionality is not needed.
* Extends the radio API with three new functions that enable more
  efficient radio duty cycling protocols: channel check, pending
  packet, and receiving packet.
* New initialization mechanism, which takes advantage of the NETSTACK
  #defines.
 2010-02-18 21:48:39 +00:00
adamdunkels f8c804e28b ntikiMAC: a new radio duty cycling mechanism that uses a combination 
of link-layer and MAC-layer mechanisms to achieve a very low power
consumption: during idle listening the radio is switched off between
99.2% and 99.6% of the time. One unicast transmission typically adds
between 0.07% and 1.2% additional radio time, depending on packet
size.

ContikiMAC uses the standard IEEE 802.15.4 message format and adds no
additional headers.

ContikiMAC is simple: it uses periodic two-shot channel sampling
during idle listening to keep the radio on-time down. Transmissions
are done with repeated transmissions until a link-layer ACK is
received.
 2010-02-18 21:26:15 +00:00
adamdunkels f5c48751b5 Reworked 802.15.4 header creation and parsing so that it works regardless of the size of the rimeaddr_t typedef 2010-02-18 21:00:28 +00:00
adamdunkels 2fbf21b2b3 Refactored the phase optimization functionality into a separate module 2010-02-18 20:58:59 +00:00
adamdunkels 515a391ee4 Removed left-over debug printfs 2010-02-15 23:31:05 +00:00
dak664 bb9afb4fb1 Remove compiler warning 2010-02-15 20:49:38 +00:00
adamdunkels 4bb0375251 Buffer name definition bugfix 2010-02-15 19:23:54 +00:00
adamdunkels 9bb149ca13 Bugfix by Raimondas Sasnauskas: TCP SYN duplicate receptions in the SYN_RCVD state was not correctly handled 2010-02-15 18:03:07 +00:00
adamdunkels d67d1f7340 Major bugfix, found by Raimondas Sasnauskas: the TCP periodic timer was not started when a new connection request arrived. If there were no other active TCP connections, this means that the SYNACK would never be retransmitted, potentially leading to a forever stale TCP connection. 2010-02-09 12:58:53 +00:00
adamdunkels 4a522c96dd Added debugging statements for packet drops 2010-02-08 21:59:49 +00:00
adamdunkels 2b6a651233 Added missing include, made debug statement more explicit 2010-02-08 21:59:21 +00:00
adamdunkels 2eba08e8f6 Made queuebuf statistics configurable, and off by default 2010-02-08 21:10:32 +00:00
nvt-se f4d19560fc Fixed a performance problem by not allowing GC while doing merges of files and micro logs. 2010-02-08 14:08:14 +00:00
oliverschmidt c284092a53 - Set cursor in ctk_draw_init() to top left corner as it is called for re-initialization on Contiki exit. 2010-02-07 21:43:03 +00:00
oliverschmidt 1d1f3a23af - No need for textcolor() before cclear(). 
- Set textcolor() in ctk_draw_init() to some reasonable value as it is called for re-initialization on Contiki exit.
 2010-02-07 21:38:01 +00:00
adamdunkels b98f7d891f Bugfix: added missing queuebuf allocation 2010-02-06 20:50:24 +00:00
adamdunkels 671216c558 No need to clear the headers now that we explicitly save a queuebuf when sending fragments 2010-02-06 17:07:43 +00:00
adamdunkels b6647b5630 Turns out that with cxmac, clearing the header after sending a packet is not enough to make fragmentation work. Instead, we allocate a queuebuf and restore the packet after from the queuebuf after sending it. 2010-02-06 09:42:49 +00:00
adamdunkels 494e692d0b Bugfix: clear the header after sending a packet solves a problem with fragmentation; also prod the watchdog since fragment transmissions can take a long time with some low-power MAC protocol 2010-02-06 07:49:58 +00:00
adamdunkels a68b4c40c4 Added a function to clear only the header part of the packetbuf 2010-02-06 07:48:52 +00:00
oliverschmidt e88d209214 Adjusted process name to title case. 2010-02-05 19:13:05 +00:00
nifi a1199721a6 Changed to use separate Contiki event type for ICMP6 notifications 2010-02-05 12:43:36 +00:00
oliverschmidt 5e66abda50 Initialize lastport in all cases it is defined. 2010-02-04 21:33:51 +00:00
adamdunkels d8b0625e21 Bugfix: lastport must be defines both when UIP_ACTIVE_OPEN or UIP_UDP are defined (thanks Oliver!) 2010-02-04 21:14:45 +00:00
adamdunkels 7bcb106fa9 Disable the stream mode for TCP packets since it does not seem to work reliably with cxmac 2010-02-04 18:57:33 +00:00
adamdunkels 13f6673d04 Bugfix: drop incoming TCP and UDP packets where port numbers are zero 2010-02-04 11:17:42 +00:00
adamdunkels d7b7b05d0e Moved the neigbor_init() call to the collect module, since it is the only one that currently uses it 2010-02-03 20:38:33 +00:00
adamdunkels 75e1c0c8c7 Include contiki-conf.h to let the MAC channel check rate be configurable 2010-02-03 16:45:12 +00:00
adamdunkels 06d17c7e1c Remove unused rtimer code 2010-02-03 16:44:43 +00:00
adamdunkels 4bffd277f5 Don't set the stream bit on outgoing TCP packets for now - it doesn't seem to play well with IPv6 and X-MAC 2010-02-03 16:44:19 +00:00
adamdunkels 36db5eb70b Added debug printout 2010-02-03 01:18:24 +00:00
adamdunkels e419eb3cc5 Retransmit packet if it didn't receive a MAC layer ack 2010-02-03 01:17:54 +00:00
adamdunkels d68af249ec Added a MAC layer return value that informs the caller that a packet did not receive a MAC layer acknowledgement 2010-02-03 01:17:32 +00:00
adamdunkels 4bc4f033e8 Increase the trickle resend interval for router advertisements 2010-02-03 01:13:17 +00:00
adamdunkels 181213124b Added a configuration option for setting the MAC channel check rate (which must be a power of two). The configuration is independent of the MAC protocol. 2010-02-02 23:28:58 +00:00
adamdunkels f66cd6d44e Increased the forwarding queue to six packets to improve collection robustness 2010-02-02 21:44:05 +00:00
adamdunkels e21c1a39d3 Removed unused code; a number of fixed by Anthony Asterisk 2010-02-02 21:13:27 +00:00
adamdunkels 901a128e7f Reconfigured the timeouts to work better on top of a power-cycling radio mechanism 2010-02-02 21:12:29 +00:00
adamdunkels 28052c655f Removed exit() calls that were unadvertedtly left in from testing 2010-02-02 21:10:38 +00:00
adamdunkels 0db31db624 Moved declarations to the start of each function 2010-02-02 21:09:06 +00:00
adamdunkels fcf60e9260 Removed the csma_init declaration in the mac_driver struct since it isn't needed and it breaks sdcc 2010-02-02 20:45:58 +00:00
adamdunkels cc2be0f111 Remove compiler warnings 2010-02-02 16:33:07 +00:00
adamdunkels 88c661b0c2 Rewrote the netif time code so that is avoids the use of floating point numbers; some code style fixes 2010-02-02 16:32:03 +00:00
oliverschmidt 3f142f0718 Convert '@' correctly from PETSCII to ASCII - by leaving it alone. 2010-01-31 23:46:19 +00:00
adamdunkels 1a13d25d33 Revised version of the X-MAC implementation that uses a ctimer instead 
of an rtimer for the periodic radio duty cycling. The benefit of this
implementation is that it leaves an rtimer free for user tasks. The
drawback is a slightly higher idle power consumption. This new version
is based on the current rtimer-based X-MAC.
 2010-01-31 18:44:23 +00:00
adamdunkels e4168db633 Bugfix: deallocate queuebuf only if there was no collision 2010-01-31 13:55:36 +00:00
oliverschmidt 9e809ef5a4 Provide optional prototypes for all three keyboard input related functions. 2010-01-31 12:48:46 +00:00
adamdunkels 4938df5c05 Update to Contiki version number 2.4 2010-01-29 18:03:55 +00:00
adamdunkels 388c5d4244 Made the sicslowpan MAC layer reachable from outside modules 2010-01-28 13:50:51 +00:00
adamdunkels 2ae7ed827c Increase the default X-MAC channel check rate to 4 Hz instead of 2 Hz 2010-01-28 13:40:47 +00:00
adamdunkels f94d6df6f0 Bugfix: copy the originator address from the packetbuf into a local variable to avoid it being overwritten 2010-01-27 08:12:56 +00:00
adamdunkels 8430dab039 Typecast to fix nightly build problem 2010-01-27 07:36:31 +00:00
adamdunkels 9e5823f060 Made retransmission timeout configurable 2010-01-26 10:19:26 +00:00
adamdunkels b728c0927c Made number of duplicate announcements configurable 2010-01-26 10:18:55 +00:00
adamdunkels cc3f609eaa Bugfix for alignment issue. Added mechanism that allows five duplicate announcements before suppressing one's own. 2010-01-25 13:55:17 +00:00
adamdunkels 71ffde578e Moved route_init() into mesh instead of the generic rime initialiation 2010-01-25 13:54:26 +00:00
adamdunkels 423e37f426 Added parameter to ipolite that specifies how many dups that are acceptable, before suppressing one's own packet 2010-01-25 13:54:06 +00:00
adamdunkels 0b58ca3b22 Bugfix: split full size TCP segments if they match the MSS definition, not only the buffer size definition 2010-01-25 13:53:15 +00:00
adamdunkels 7615a6cf47 Bugfix by Henrik Mäkitaavola: check that ICMP6 process is defined before invoking it 2010-01-25 13:37:05 +00:00
adamdunkels 4f3e8d565c Added a simple CSMA (Carrier Sense Multiple Access) mechanism that 
works on top of an underlying duty cycling mechanism. The CSMA layer
retransmits packets that could not be sent because of a collision was
detected.
 2010-01-25 11:46:44 +00:00
adamdunkels 7ad93e5d18 Added a field to the struct mac interface: 
channel_check_interval(). This function returns the interval by which
the duty cycling mechanism checks the radio channel for activity. It
is used by higher layer mechanisms to determine suitable timeouts for
retransmissions.
 2010-01-25 11:43:32 +00:00
fros4943 26e0bab11a bugfix: alignment problem caused by previous bugfix 2010-01-21 11:39:35 +00:00
fros4943 3db4f36c3e removed compiler specific attribute 2010-01-20 09:58:16 +00:00
nvt-se 3c890c48a9 Added some comments to clarify how Coffee works internally 2010-01-19 16:18:34 +00:00
adamdunkels 6f72ff7af1 Remove compiler warnings 2010-01-19 13:08:24 +00:00
adamdunkels c962f49516 Alignment bugfix 2010-01-18 21:27:21 +00:00
adamdunkels e455ef3533 Added the battery indicator to the sensors API 2010-01-15 08:51:21 +00:00
adamdunkels fab672c7ba Reverted the FIFOP->FIFO change; it didn't work :( 2010-01-14 23:32:05 +00:00
nvt-se d2655eac7a make watchdog management slightly more abstract to simplify porting 2010-01-14 21:16:58 +00:00
adamdunkels 53edff7655 Added sensor API for the SHT11 driver 2010-01-14 20:16:33 +00:00
adamdunkels 743e93e650 Do not remove encounters - there is no need to, as they are only an optimization 2010-01-14 20:14:03 +00:00
adamdunkels f6715890de Made SENSORS_ACTIVATE() and SENSORS_DEACTIVATE() use non-pointers, for concistency 2010-01-14 20:13:34 +00:00
nifi 079db2af55 fixed sensors_find API 2010-01-14 20:04:38 +00:00
joxe dd6922906c replace void pointer types with int 2010-01-14 15:33:27 +00:00
nifi 480f72c95c changed argument for SENSORS_ACTIVATE/DEACTIVATE to be a pointer to the sensor structure 2010-01-14 14:17:08 +00:00
nifi 1d592b5680 removed obsolete structure 2010-01-14 13:55:21 +00:00
joxe 84d969ce85 simplified the sensors API - will break some platforms... 2010-01-14 13:29:56 +00:00
nvt-se a03e899c27 Signal the result of transmissions attempts made in the mesh module. Patch from Moritz Struebe 2009-12-18 14:57:15 +00:00
nifi 7b2b93e6e6 clear transmission flag if send failed 2009-12-18 14:49:42 +00:00
zhitao 93c748cc74 Bug fix for mysterious packet loss : check FIFO pin instead of FIFOP pin for any unread RX FIFO data; 
Added protection of packet timestamp across interrupts. Note that race condition can still occur as interrupts and self-scheduled reads of the RX FIFO interleave in certain unusual patterns. More investigation is needed.
 2009-12-11 18:32:54 +00:00
adamdunkels f4e6758b22 Use RTIMER_NOW() instead of rtimer_arch_now() 2009-12-09 18:08:26 +00:00
adamdunkels eff2203310 There were many bugs in the rtimer code, particularly one that made only one rtimer at a time work. We have a new rtimer system that we're testing, but in the meantime, I rewrote the rtimer code to explicitly support only one rtimer. Makes the code significantly simpler (and fixes a bug that was very hard to track down). 2009-12-08 23:55:17 +00:00
adamdunkels 2f105e933a Variable xmac_is_on was used both in interrupt and non-interrupt contexts and needs to be volatile 2009-12-06 23:29:38 +00:00
adamdunkels 53457eb1f0 Fixed compilation warning 2009-12-06 17:10:54 +00:00
adamdunkels 8bcc838d8a Bugfix: don't set the 'we are sending' flag until we are actually sending 2009-12-06 17:05:45 +00:00
adamdunkels 6897270289 Bugfix to the Contiki LPP encounter timing code: encounters are now 
properly timed.
 2009-12-06 13:18:32 +00:00
adamdunkels 822149f943 Significant improvements to the Contiki X-MAC: 
* the code is simplified, particularly the duty cycling logic
* old unused code has been removed
* Contiki X-MAC now listens before sending a strobe to avoid MAC-level
  collisions
* broadcasts are sent directly, without strobes, reducing the power
  consumption of receivers
* turn off radio for 1 ms between sending a strobe and expecting the
  strobe ack
 2009-12-06 13:16:59 +00:00
adamdunkels cef2e65c9b Added an error type for signalling a MAC-layer collision 2009-12-05 21:49:51 +00:00
adamdunkels 4a1a823a49 Code style fix 2009-12-05 13:29:41 +00:00
adamdunkels 6815e2a53f Code style fix 2009-12-05 11:26:20 +00:00
fros4943 a1b4597b95 fixed announcement compilation error 2009-11-27 14:27:50 +00:00
adamdunkels aeefa75304 Fixed alignment problems in announcement packet creation 2009-11-27 12:49:27 +00:00
nvt-se 116771adbc made the route cache timeout configurable 2009-11-20 14:35:58 +00:00
nifi 1f2c226d8e * Added ctimer_restart(). Patch by Moritz Struebe. 
* Added ctimer_expired().
 2009-11-19 18:32:05 +00:00
nifi bb0ffe0478 moved rime initialization into rime router so it is easier to switch IPv6 routing module 2009-11-18 13:51:55 +00:00
fros4943 0034fd7bca generic return values for sent packet 2009-11-13 10:09:02 +00:00
fros4943 9cc57c4324 generic radio return values 
+ minor bug fix: SFD may go high without transmission starting (very seldom)
 2009-11-13 10:07:53 +00:00
fros4943 9b20f11cd8 chameleon returns 1 only on successful rime_output() 2009-11-13 09:14:52 +00:00
fros4943 583dd11c55 rime_output() now returns RIME_OK or RIME_ERR depending on the MAC return value. 
this patch may affect Rime sniffers running on top of MAC protocols that do not yet return generic MAC return values
 2009-11-13 09:10:24 +00:00
fros4943 26bb5ecd21 added radio and MAC generic return values to allow applications finding out whether the packet was transmitted 2009-11-13 08:59:22 +00:00
joxe 5b0b36c39e accept messages to all routers if UIP_CONF_ROUTER is set. 2009-11-12 14:05:42 +00:00
adamdunkels 60a3fc0cae Fixed alignment issue 2009-11-09 08:22:40 +00:00
adamdunkels 56218aba3b Made rimeaddr_t pointers const where they should be. 2009-11-08 19:40:16 +00:00
adamdunkels 70fc23ac7e Enable stream mode by default, remove LED debug mode 2009-11-04 16:02:45 +00:00
fros4943 5f71e9914e configurable line buffer size + simplified interrupt handler + overflow check on line buffer 2009-11-02 12:47:06 +00:00
adamdunkels 5aab2eb77d A simple addition with significant performance implications: 
sicslowpan tags TCP packets with the PACKETBUF_ATTR_PACKET_TYPE_STREAM
flag, which makes the underlying power-saving MAC layer keep the radio
on for some time after transmitting the packet. This allows reply
packets to be processed directly, significantly increasing TCP latency
and throughput.
 2009-11-02 11:58:56 +00:00
adamdunkels c7a91ad4a2 Bugfix: UIP_TCP_BUF -> BUF 2009-10-27 23:09:58 +00:00
adamdunkels 631af06c7c Bugfix: Active TCP connections in uIP are made by first setting up the 
TCP connection state, then poll uIP to send out the first SYN. Until
now, however, the SYN was not sent as part of the poll, but at the
first retransmission. This is now fixed.
 2009-10-27 22:34:08 +00:00
fros4943 6f4a537aa0 serial line ringbuf implementation + increased default buffer size to 128 bytes 2009-10-27 16:20:31 +00:00
zhitao 1913e1a936 prevent neighbor ETX from wrap-over 2009-10-22 13:11:20 +00:00
nifi df32fde58c Made max number of neighbors configurable 2009-10-21 21:25:10 +00:00
adamdunkels a25a3a45b5 Bugfix: attribute energy expenditure to a device only if the device was actually switched on 2009-10-20 20:19:27 +00:00
adamdunkels 91579fbaab Removed debug strings to save ROM 2009-10-20 08:06:43 +00:00
nifi 223fa1c8e5 added missing include 2009-10-20 07:42:03 +00:00
adamdunkels a5ea7ef966 Increased default number of queue buffers 2009-10-19 21:28:59 +00:00
adamdunkels 4d9b05c2ce Increased default header size in packetbuf to accomodate 802.15.4 headers 2009-10-19 21:28:11 +00:00
adamdunkels 7cdfbca973 Alignment problems with announcements fixed 2009-10-19 21:27:02 +00:00
adamdunkels 9ec57d61ad Added MAC layer framing support to X-MAC so that packets now are standard 802.15.4 frames 2009-10-19 20:53:56 +00:00
adamdunkels 4de1816e36 Added a new module called "framer" that creates MAC level frames to 
the packetbuf from packet attributes. Two framer modules are included,
one that creates 802.15.4 frame headers, and one that creates a
minimal "nullmac"-style header that only contains the link-local
addresses.
 2009-10-19 18:30:03 +00:00
nifi ae226c5917 * Set sender and receiver packet attributes on incoming packets 
* Added link layer destination check
 2009-10-19 11:25:54 +00:00
adamdunkels 10c873018d Ensure that DEFAULT_PERIOD is != 0, to avoid a modulo with 0 2009-10-19 06:39:29 +00:00
adamdunkels f25856a387 Hack to be able to receive UDPv4 multicast packets 2009-10-18 22:03:44 +00:00
adamdunkels fb037e0afb Added function for sending an UDP packet to a specified IP address and port number over an existing UDP connection 2009-10-18 22:02:01 +00:00
adamdunkels 9d26bd663e A new optimization to X-MAC: senders now keep track of when neighbors 
last were known to be awake. When sending a packet, a sender does not
start to send strobes until the neighbor is expected to be awake. This
reduces power consumption for senders and decreases the contention in
the network as there are less packets in the air. Additionally, the
ACK optimization was improved so that data/ack exchanges now are
more efficient.
 2009-10-18 13:19:25 +00:00
nvt-se 31f41d842e * decline route discovery requests if we have one in the air 
* and, by popular demand, switched PRINTF to printf in the debug macro. :-)
 2009-10-08 16:30:26 +00:00
nvt-se f143227205 made the route discovery packet timeout configurable. 2009-09-29 16:02:28 +00:00
nifi 0ad51b8dcc Moved the link layer destination check to sicslowmac 2009-09-18 16:37:17 +00:00
adamdunkels 49e9b0bdcb Fixed compiler warning 2009-09-09 21:10:35 +00:00
adamdunkels 1980253ba3 Refresh routes when hearing a packet from a neighbor 2009-09-09 21:10:21 +00:00
adamdunkels 786ed3cf84 Fixed sdcc compiler problem: function pointers cannot be NULL, so added a dummy function instead 2009-09-09 21:09:42 +00:00
adamdunkels 2181e90f69 Added the possibility to switch lpp off. Fixed sdcc compiler issue 2009-09-09 21:09:23 +00:00
adamdunkels 1cafbc6002 sdcc compiler issue fix: compound assignments are not supported, so we use memcpy() instead 2009-09-09 21:08:46 +00:00
adamdunkels 8745235a79 Minor codestyle fix 2009-09-09 21:07:42 +00:00
nifi d4b619bcc5 Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430 2009-09-07 11:31:26 +00:00
nvt-se 4d21a3e203 Don't assume that radio->send turns on the radio automatically. 2009-09-04 10:59:30 +00:00
nvt-se a21dece53f removed unused state codes and unused printf statements 2009-09-03 12:57:57 +00:00
nifi 3a8ee769cb Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown. 2009-08-31 12:06:34 +00:00
oliverschmidt e60db62b10 Added prototype missing for quite some time now - do we need -Werror ? 2009-08-20 20:27:17 +00:00
adamdunkels 522f991f14 Set sender and receiver packet attributes on incoming packets: patch by Gidon Ernst 2009-08-20 18:59:17 +00:00
nifi c81dbb6c89 Fixed problem with the radio driver changing transmission power to max when not specified at transmission. Also fixed bug where the lock was released when setting the transmission power. 
Thanks to Djamel Djenouri and Marcus Lundn for identifying the problem.
 2009-08-19 15:05:05 +00:00
fros4943 18a98bb573 bug fix: we need to explicitly turn off the cc2420 listen mode after a packet transmission 2009-08-19 12:00:04 +00:00
nvt-se 8acea82207 Set a file mode in the third argument when calling open() with O_CREAT in 
the flags. Required by IEEE Std 1003.1, 2004 Edition.
 2009-08-10 09:50:55 +00:00
joxe 0c8b200987 added autoack configuration for CC2420 and reversed long ieee address for address recognition 2009-07-28 22:24:53 +00:00
dak664 c1b7375a5a *** empty log message *** 2009-07-23 16:13:48 +00:00
dak664 95d844d09f Third attempt with INCLUDE_APPLICATE_SOURCE to remove compile warnings without breaking any platforms 2009-07-16 18:02:34 +00:00
dak664 5e6769b4c1 Fix previous 2 overhasty commits which broke required signedness of address shifts 2009-07-16 17:43:39 +00:00
dak664 c4b4c25e1c Bugs in previous change, could include 32 bit code on 16 bit builds 2009-07-16 17:33:50 +00:00
dak664 4531d66986 INCLUDE_APPLICATE_SOURCE defined to remove compiler warnings. Untested but should work on all AVR builds. 2009-07-16 17:17:22 +00:00
nvt-se 62b380b0a6 Fixed a bug with reading to far in get_record index. Thanks to Darren Moore for reporting this. 2009-07-16 11:58:44 +00:00
dak664 2166261890 Separate input and output debug PRINTFs 2009-07-10 13:33:45 +00:00
nvt-se 906717a333 * isolate only pages in the last sector 
* set max_pages to 0 when calling remove_by_page to prevent file starvation.
* when allocating files, only update next_free if the allocated file starts at next_free.

Thanks to Darren Moore (CSIRO) for suggesting the first two of the
three changes.
 2009-07-09 22:16:22 +00:00
nvt-se c872a86653 undo accidental enabling of debug output. 2009-06-29 13:33:12 +00:00
nvt-se 1e0ca9ceac Made the use of micro logs configurable to make file modifications 
more efficient on storage types that support inline updates.

The sky platform uses logs, and the native platform uses no logs.
 2009-06-29 13:30:16 +00:00
nvt-se 38fff1b527 mac_driver structure has been changed to include the init function. 2009-06-24 16:31:49 +00:00
joxe a71664e8d1 quick fix for driver to work with 4MHz 2009-06-23 13:12:37 +00:00
adamdunkels 1c18bf4053 -> 2.3 2009-06-22 20:40:43 +00:00
nifi 912aba7280 added init function in MAC driver for easier configuration 2009-06-22 11:14:11 +00:00
nvt-se 53a8acc49a cleared debug flag. 2009-06-10 15:13:37 +00:00
nvt-se 349e14abd4 fixed GC bug with big files and unwanted buffer overwrite bug. 2009-06-10 15:03:35 +00:00
nvt-se 33909cc2fd made neighbor discovery method configurable. default is announcements. 2009-05-30 19:54:05 +00:00
nvt-se 83f2b9ae57 include ctimer.h, since ctimer's are used in the neighbor_discovery_conn struct. 2009-05-30 19:40:39 +00:00
nvt-se d9b75b2fda stop the watchdog while merging. 2009-05-26 14:27:06 +00:00
nvt-se 9277f922f1 fixed some documentation typos. 
also uc -> unicast, stuc -> stunicast.
 2009-05-26 13:58:53 +00:00
nifi f39d2bd4c6 Fixed link panid for broadcasts to be standard compliant. Ignore packets addressed to other non-broadcast panids. 2009-05-26 12:08:29 +00:00
nvt-se 88766d8740 use unsigned for sector count type. 2009-05-25 22:10:04 +00:00
nvt-se e2bbdbca9b decrement TTL right after forwarding check. 2009-05-19 11:54:50 +00:00